mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
To: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konradybcio@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Subject: [PATCH] arm64: dts: qcom: hamoa-iot-evk: Add vbus regulator support for Type-A ports
Date: Mon,  8 Dec 2025 14:21:52 +0530	[thread overview]
Message-ID: <20251208085152.2597818-1-krishna.kurapati@oss.qualcomm.com> (raw)

The Multiport controller on Hamoa EVK platform is connected to Two Type-A
ports. VBUS for each of these ports are provided by a TPS2559QWDRCTQ1
regulator, controlled from PMIC GPIOs.

Add the necessary regulators and GPIO configuration to power these.

Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts | 37 ++++++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
index 36dd6599402b..665983ed6714 100644
--- a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
+++ b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include "hamoa-iot-som.dtsi"
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
 / {
 	model = "Qualcomm Technologies, Inc. Hamoa IoT EVK";
@@ -167,6 +168,26 @@ pmic_glink_ss2_con_sbu_in: endpoint {
 		};
 	};
 
+	regulator-usb3-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "USB3_VBUS";
+		gpio = <&pm8550ve_9_gpios 4 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&usb3_en>;
+		pinctrl-names = "default";
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	regulator-usb6-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "USB6_VBUS";
+		gpio = <&pm8550ve_9_gpios 5 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&usb6_en>;
+		pinctrl-names = "default";
+		enable-active-high;
+		regulator-always-on;
+	};
+
 	vreg_edp_3p3: regulator-edp-3p3 {
 		compatible = "regulator-fixed";
 
@@ -877,6 +898,22 @@ usb0_1p8_reg_en: usb0-1p8-reg-en-state {
 		input-disable;
 		output-enable;
 	};
+
+	usb3_en: usb3-en-state {
+		pins = "gpio4";
+		function = "normal";
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+		output-enable;
+		power-source = <0>;
+	};
+
+	usb6_en: usb6-en-state {
+		pins = "gpio5";
+		function = "normal";
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+		output-enable;
+		power-source = <0>;
+	};
 };
 
 &pmc8380_5_gpios {
-- 
2.34.1


             reply	other threads:[~2025-12-08  8:52 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-12-08  8:51 Krishna Kurapati [this message]
2025-12-08 16:24 ` Konrad Dybcio
2025-12-08 16:24 ` Konrad Dybcio

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20251208085152.2597818-1-krishna.kurapati@oss.qualcomm.com \
    --to=krishna.kurapati@oss.qualcomm.com \
    --cc=andersson@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=konradybcio@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®