From: Swaraj Gaikwad <swarajgaikwad1925@gmail.com>
To: swarajgaikwad1925@gmail.com
Cc: bp@alien8.de, corbet@lwn.net, dave.hansen@linux.intel.com,
david.hunter.linux@gmail.com, hpa@zytor.com,
linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
mingo@redhat.com, skhan@linuxfoundation.org, tglx@linutronix.de,
x86@kernel.org, Randy Dunlap <rdunlap@infradead.org>,
Bagas Sanjaya <bagasdotme@gmail.com>
Subject: [PATCH v2] Documentation: x86/boot: Fix malformed table in boot.rst
Date: Tue, 9 Dec 2025 08:53:30 +0000 [thread overview]
Message-ID: <20251209085330.9124-1-swarajgaikwad1925@gmail.com> (raw)
In-Reply-To: <20251208210113.24057-1-swarajgaikwad1925@gmail.com>
Sphinx reports htmldocs warnings:
Documentation/arch/x86/boot.rst:437: ERROR: Malformed table.
Text in column margin in table line 2.
The table header defined the first column width as 2 characters ("=="),
which is too narrow for entries like "0x10" and "0x13". This caused the
text to spill into the margin, triggering a docutils parsing failure.
Fix it by extending the first column of assigned boot loader ID to 4
characters ("====") to fit the widest entries.
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Swaraj Gaikwad <swarajgaikwad1925@gmail.com>
---
Changes in v2:
- Dropped accidental whitespace changes (the second chunk in v1).
- Simplified commit message as suggested by Bagas Sanjaya.
---
Documentation/arch/x86/boot.rst | 48 ++++++++++++++++-----------------
1 file changed, 24 insertions(+), 24 deletions(-)
diff --git a/Documentation/arch/x86/boot.rst b/Documentation/arch/x86/boot.rst
index 6d36ce86fd8e..89e785850f7e 100644
--- a/Documentation/arch/x86/boot.rst
+++ b/Documentation/arch/x86/boot.rst
@@ -433,30 +433,30 @@ Protocol: 2.00+
Assigned boot loader IDs:
- == =======================================
- 0x0 LILO
- (0x00 reserved for pre-2.00 bootloader)
- 0x1 Loadlin
- 0x2 bootsect-loader
- (0x20, all other values reserved)
- 0x3 Syslinux
- 0x4 Etherboot/gPXE/iPXE
- 0x5 ELILO
- 0x7 GRUB
- 0x8 U-Boot
- 0x9 Xen
- 0xA Gujin
- 0xB Qemu
- 0xC Arcturus Networks uCbootloader
- 0xD kexec-tools
- 0xE Extended (see ext_loader_type)
- 0xF Special (0xFF = undefined)
- 0x10 Reserved
- 0x11 Minimal Linux Bootloader
- <http://sebastian-plotz.blogspot.de>
- 0x12 OVMF UEFI virtualization stack
- 0x13 barebox
- == =======================================
+==== ==============================
+0x0 LILO
+ (0x00 reserved for pre-2.00 bootloader)
+0x1 Loadlin
+0x2 bootsect-loader
+ (0x20, all other values reserved)
+0x3 Syslinux
+0x4 Etherboot/gPXE/iPXE
+0x5 ELILO
+0x7 GRUB
+0x8 U-Boot
+0x9 Xen
+0xA Gujin
+0xB Qemu
+0xC Arcturus Networks uCbootloader
+0xD kexec-tools
+0xE Extended (see ext_loader_type)
+0xF Special (0xFF = undefined)
+0x10 Reserved
+0x11 Minimal Linux Bootloader
+ <http://sebastian-plotz.blogspot.de>
+0x12 OVMF UEFI virtualization stack
+0x13 barebox
+==== ==============================
Please contact <hpa@zytor.com> if you need a bootloader ID value assigned.
--
2.52.0
next prev parent reply other threads:[~2025-12-09 3:24 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-08 21:01 [PATCH] " Swaraj Gaikwad
2025-12-08 18:11 ` Randy Dunlap
2025-12-08 22:37 ` Bagas Sanjaya
2025-12-08 22:50 ` Jonathan Corbet
2025-12-08 22:58 ` Bagas Sanjaya
2025-12-09 8:53 ` Swaraj Gaikwad [this message]
2025-12-09 8:53 ` [PATCH v2] " Ingo Molnar
2025-12-09 18:15 ` Randy Dunlap
2025-12-09 21:10 ` Randy Dunlap
2025-12-09 23:17 ` Bagas Sanjaya
2025-12-10 9:28 ` [PATCH v3] " Swaraj Gaikwad
2025-12-10 7:40 ` [tip: x86/urgent] x86/boot/Documentation: Fix htmldocs build warning due to " tip-bot2 for Swaraj Gaikwad
2025-12-10 1:14 ` [PATCH v2] Documentation: x86/boot: Fix " Swaraj Gaikwad
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251209085330.9124-1-swarajgaikwad1925@gmail.com \
--to=swarajgaikwad1925@gmail.com \
--cc=bagasdotme@gmail.com \
--cc=bp@alien8.de \
--cc=corbet@lwn.net \
--cc=dave.hansen@linux.intel.com \
--cc=david.hunter.linux@gmail.com \
--cc=hpa@zytor.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=rdunlap@infradead.org \
--cc=skhan@linuxfoundation.org \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®