[PATCH] xtensa: align: validate user access in fast_load_store under MMU

[Ricky Ringler <richard.rringler@gmail.com>]

fast_load_store aligns faulting address then reads two words
with l32i. With CONFIG_MMU, bad user access can fault
in this path.

Replace arbitrary jump to .Linvalid_instruction with
access_ok() to validate aligned address before loads
and branch to .Linvalid_instruction on failure.

a0: scratch. a2: sp. Matches existing usage in
Xtensa entry.S.

Tested-by: Ricky Ringler <richard.rringler@gmail.com>

Testing:
- Built Xtensa with CONFIG_MMU enabled
- objdump before/after comparison and validated code path
- Ran emulated Xtensa device with QEMU and manually triggered unaligned and
  aligned loads

Signed-off-by: Ricky Ringler <richard.rringler@gmail.com>
---
 arch/xtensa/include/asm/asm-uaccess.h | 2 +-
 arch/xtensa/kernel/align.S            | 9 ++++++---
 2 files changed, 7 insertions(+), 4 deletions(-)

diff --git a/arch/xtensa/include/asm/asm-uaccess.h b/arch/xtensa/include/asm/asm-uaccess.h
index 7cec869136e3..c5baa134d3d8 100644
--- a/arch/xtensa/include/asm/asm-uaccess.h
+++ b/arch/xtensa/include/asm/asm-uaccess.h
@@ -68,7 +68,7 @@
  * 	<aa>	register containing memory address
  * 	<as>	register containing memory size
  * 	<at>	temp register
- * 	<sp>
+ * 	<sp>	unused; ignored
  * 	<error>	label to branch to on error; implies fall-through
  * 		macro on success
  * On Exit:
diff --git a/arch/xtensa/kernel/align.S b/arch/xtensa/kernel/align.S
index ee97edce2300..808f9f843d33 100644
--- a/arch/xtensa/kernel/align.S
+++ b/arch/xtensa/kernel/align.S
@@ -21,6 +21,9 @@
 #include <asm/asm-offsets.h>
 #include <asm/asmmacro.h>
 #include <asm/processor.h>
+#ifdef CONFIG_MMU
+#include <asm/asm-uaccess.h>
+#endif
 
 #if XCHAL_UNALIGNED_LOAD_EXCEPTION || defined CONFIG_XTENSA_LOAD_STORE
 #define LOAD_EXCEPTION_HANDLER
@@ -178,15 +181,15 @@ ENTRY(fast_load_store)
 	bbsi.l	a4, OP1_SI_BIT + INSN_OP1, .Linvalid_instruction
 
 1:
-	movi	a3, ~3
+	movi    a3, ~3
 	and	a3, a3, a8		# align memory address
 
 	__ssa8	a8
 
 #ifdef CONFIG_MMU
 	/* l32e can't be used here even when it's available. */
-	/* TODO access_ok(a3) could be used here */
-	j	.Linvalid_instruction
+    movi    a5, 8
+    access_ok a3, a5, a0, a2, .Linvalid_instruction
 #endif
 	l32i	a5, a3, 0
 	l32i	a6, a3, 4
-- 
2.43.0