From: Richard Genoud <richard.genoud@bootlin.com>
To: "Uwe Kleine-König" <u.kleine-koenig@baylibre.com>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Chen-Yu Tsai" <wens@csie.org>,
"Jernej Skrabec" <jernej.skrabec@gmail.com>,
"Samuel Holland" <samuel@sholland.org>,
"Philipp Zabel" <p.zabel@pengutronix.de>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
linux-pwm@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org,
Richard Genoud <richard.genoud@bootlin.com>
Subject: [PATCH v2 0/4] Introduce Allwinner H616 PWM controller
Date: Wed, 17 Dec 2025 09:25:00 +0100 [thread overview]
Message-ID: <20251217082504.80226-1-richard.genoud@bootlin.com> (raw)
Allwinner H616 PWM controller is quite different from the A10 one.
It can drive 6 PWM channels, and like for the A10, each channel has a
bypass that permits to output a clock, bypassing the PWM logic, when
enabled.
But, the channels are paired 2 by 2, sharing a first set of
MUX/prescaler/gate.
Then, for each channel, there's another prescaler (that will be bypassed
if the bypass is enabled for this channel).
It looks like that:
_____ ______ ________
OSC24M --->| | | | | |
APB1 ----->| Mux |--->| Gate |--->| /div_m |-----> PWM_clock_src_xy
|_____| |______| |________|
________
| |
+->| /div_k |---> PWM_clock_x
| |________|
| ______
| | |
+-->| Gate |----> PWM_bypass_clock_x
| |______|
PWM_clock_src_xy -----+ ________
| | |
+->| /div_k |---> PWM_clock_y
| |________|
| ______
| | |
+-->| Gate |----> PWM_bypass_clock_y
|______|
Where xy can be 0/1, 2/3, 4/5
PWM_clock_x/y serve for the PWM purpose.
PWM_bypass_clock_x/y serve for the clock-provider purpose.
The common clock framework has been used to manage those clocks.
This PWM driver serves as a clock-provider for PWM_bypass_clocks.
This is needed for example by the embedded AC300 PHY which clock comes
from PMW5 pin (PB12).
This series is based onto v6.19-rc1
Changes since v1:
- rebase onto v6.19-rc1
- add missing headers
- remove MODULE_ALIAS (suggested by Krzysztof)
- use sun4i-pwm binding instead of creating a new one (suggested by Krzysztof)
- retrieve the parent clocks from the devicetree
- switch num_parents to unsigned int
Richard Genoud (4):
dt-bindings: pwm: allwinner: add h616 pwm compatible
pwm: sun50i: Add H616 PWM support
arm64: dts: allwinner: h616: add PWM controller
MAINTAINERS: Add entry on Allwinner H616 PWM driver
.../bindings/pwm/allwinner,sun4i-a10-pwm.yaml | 19 +-
MAINTAINERS | 5 +
.../arm64/boot/dts/allwinner/sun50i-h616.dtsi | 47 +
drivers/pwm/Kconfig | 12 +
drivers/pwm/Makefile | 1 +
drivers/pwm/pwm-sun50i-h616.c | 892 ++++++++++++++++++
6 files changed, 975 insertions(+), 1 deletion(-)
create mode 100644 drivers/pwm/pwm-sun50i-h616.c
base-commit: 8f0b4cce4481fb22653697cced8d0d04027cb1e8
--
2.47.3
next reply other threads:[~2025-12-17 8:25 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-17 8:25 Richard Genoud [this message]
2025-12-17 8:25 ` [PATCH v2 1/4] dt-bindings: pwm: allwinner: add h616 pwm compatible Richard Genoud
2025-12-18 10:15 ` Krzysztof Kozlowski
2025-12-18 10:41 ` Richard GENOUD
2025-12-21 18:52 ` Jernej Škrabec
2025-12-17 8:25 ` [PATCH v2 2/4] pwm: sun50i: Add H616 PWM support Richard Genoud
2025-12-24 9:54 ` Uwe Kleine-König
2026-01-06 11:19 ` Richard GENOUD
2026-01-06 16:27 ` Uwe Kleine-König
2026-01-06 16:58 ` Chen-Yu Tsai
2026-01-13 8:41 ` Richard GENOUD
2025-12-17 8:25 ` [PATCH v2 3/4] arm64: dts: allwinner: h616: add PWM controller Richard Genoud
2025-12-17 8:25 ` [PATCH v2 4/4] MAINTAINERS: Add entry on Allwinner H616 PWM driver Richard Genoud
2025-12-21 19:12 ` [PATCH v2 0/4] Introduce Allwinner H616 PWM controller Jernej Škrabec
2025-12-22 9:17 ` Richard GENOUD
2025-12-24 9:58 ` Uwe Kleine-König
2026-01-22 16:19 ` Paul Kocialkowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251217082504.80226-1-richard.genoud@bootlin.com \
--to=richard.genoud@bootlin.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jernej.skrabec@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=samuel@sholland.org \
--cc=thomas.petazzoni@bootlin.com \
--cc=u.kleine-koenig@baylibre.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®