[PATCH v8 1/6] firmware: qcom_scm: ipq5332: add support to pass metadata size

[Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>]

From: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>

IPQ5332 security software running under trustzone requires metadata size.
With new command support added in TrustZone that includes a size parameter,
pass metadata size as well.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Signed-off-by: Gokul Sriram Palanisamy <gokul.sriram.p@oss.qualcomm.com>
---
 drivers/firmware/qcom/qcom_scm.c | 17 +++++++++++++----
 drivers/firmware/qcom/qcom_scm.h |  1 +
 2 files changed, 14 insertions(+), 4 deletions(-)

diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c
index 1a6f85e463e0..c970157f75b5 100644
--- a/drivers/firmware/qcom/qcom_scm.c
+++ b/drivers/firmware/qcom/qcom_scm.c
@@ -583,9 +583,6 @@ int qcom_scm_pas_init_image(u32 peripheral, const void *metadata, size_t size,
 	int ret;
 	struct qcom_scm_desc desc = {
 		.svc = QCOM_SCM_SVC_PIL,
-		.cmd = QCOM_SCM_PIL_PAS_INIT_IMAGE,
-		.arginfo = QCOM_SCM_ARGS(2, QCOM_SCM_VAL, QCOM_SCM_RW),
-		.args[0] = peripheral,
 		.owner = ARM_SMCCC_OWNER_SIP,
 	};
 	struct qcom_scm_res res;
@@ -617,7 +614,19 @@ int qcom_scm_pas_init_image(u32 peripheral, const void *metadata, size_t size,
 	if (ret)
 		goto disable_clk;
 
-	desc.args[1] = mdata_phys;
+	if (__qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_PIL,
+					 QCOM_SCM_PIL_PAS_INIT_IMAGE_V2)) {
+		desc.cmd = QCOM_SCM_PIL_PAS_INIT_IMAGE_V2;
+		desc.arginfo = QCOM_SCM_ARGS(3, QCOM_SCM_VAL, QCOM_SCM_RW, QCOM_SCM_VAL);
+		desc.args[0] = peripheral;
+		desc.args[1] = mdata_phys;
+		desc.args[2] = size;
+	} else {
+		desc.cmd = QCOM_SCM_PIL_PAS_INIT_IMAGE;
+		desc.arginfo = QCOM_SCM_ARGS(2, QCOM_SCM_VAL, QCOM_SCM_RW);
+		desc.args[0] = peripheral;
+		desc.args[1] = mdata_phys;
+	}
 
 	ret = qcom_scm_call(__scm->dev, &desc, &res);
 	qcom_scm_bw_disable();
diff --git a/drivers/firmware/qcom/qcom_scm.h b/drivers/firmware/qcom/qcom_scm.h
index a56c8212cc0c..57d63e932f62 100644
--- a/drivers/firmware/qcom/qcom_scm.h
+++ b/drivers/firmware/qcom/qcom_scm.h
@@ -105,6 +105,7 @@ int qcom_scm_shm_bridge_enable(struct device *scm_dev);
 #define QCOM_SCM_PIL_PAS_SHUTDOWN	0x06
 #define QCOM_SCM_PIL_PAS_IS_SUPPORTED	0x07
 #define QCOM_SCM_PIL_PAS_MSS_RESET	0x0a
+#define QCOM_SCM_PIL_PAS_INIT_IMAGE_V2	0x1a
 
 #define QCOM_SCM_SVC_IO			0x05
 #define QCOM_SCM_IO_READ		0x01
-- 
2.34.1