From: Ryan Chen <ryan_chen@aspeedtech.com>
To: Brian Masney <bmasney@redhat.com>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Joel Stanley <joel@jms.id.au>,
Andrew Jeffery <andrew@codeconstruct.com.au>
Cc: <linux-kernel@vger.kernel.org>, <linux-clk@vger.kernel.org>,
<linux-aspeed@lists.ozlabs.org>,
<linux-arm-kernel@lists.infradead.org>,
"Ryan Chen" <ryan_chen@aspeedtech.com>
Subject: [PATCH v16 1/3] clk: aspeed: Move the existing ASPEED clk drivers into aspeed subdirectory.
Date: Wed, 24 Dec 2025 13:37:22 +0800 [thread overview]
Message-ID: <20251224-upstream_clk-v16-1-8c1318f56c3c@aspeedtech.com> (raw)
In-Reply-To: <20251224-upstream_clk-v16-0-8c1318f56c3c@aspeedtech.com>
Prepare for long-term maintenance and future additions by introducing a
dedicated drivers/clk/aspeed/ subdirectory for ASPEED clock drivers.
Move the existing ASPEED clock drivers into the new
drivers/clk/aspeed/ subdirectory.
No functional change, file move only.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
---
drivers/clk/Kconfig | 13 +------------
drivers/clk/Makefile | 3 +--
drivers/clk/aspeed/Kconfig | 13 +++++++++++++
drivers/clk/aspeed/Makefile | 3 +++
drivers/clk/{ => aspeed}/clk-aspeed.c | 0
drivers/clk/{ => aspeed}/clk-aspeed.h | 0
drivers/clk/{ => aspeed}/clk-ast2600.c | 0
7 files changed, 18 insertions(+), 14 deletions(-)
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 3a1611008e48..c46920649c97 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -284,18 +284,6 @@ config COMMON_CLK_LAN966X
LAN966X SoC. GCK generates and supplies clock to various peripherals
within the SoC.
-config COMMON_CLK_ASPEED
- bool "Clock driver for Aspeed BMC SoCs"
- depends on ARCH_ASPEED || COMPILE_TEST
- default ARCH_ASPEED
- select MFD_SYSCON
- select RESET_CONTROLLER
- help
- This driver supports the SoC clocks on the Aspeed BMC platforms.
-
- The G4 and G5 series, including the ast2400 and ast2500, are supported
- by this driver.
-
config COMMON_CLK_S2MPS11
tristate "Clock driver for S2MPS1X/S5M8767 MFD"
depends on MFD_SEC_CORE || COMPILE_TEST
@@ -513,6 +501,7 @@ config COMMON_CLK_RPMI
source "drivers/clk/actions/Kconfig"
source "drivers/clk/analogbits/Kconfig"
+source "drivers/clk/aspeed/Kconfig"
source "drivers/clk/baikal-t1/Kconfig"
source "drivers/clk/bcm/Kconfig"
source "drivers/clk/hisilicon/Kconfig"
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 61ec08404442..f7bce3951a30 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -62,8 +62,6 @@ obj-$(CONFIG_COMMON_CLK_FIXED_MMIO) += clk-fixed-mmio.o
obj-$(CONFIG_COMMON_CLK_FSL_FLEXSPI) += clk-fsl-flexspi.o
obj-$(CONFIG_COMMON_CLK_FSL_SAI) += clk-fsl-sai.o
obj-$(CONFIG_COMMON_CLK_GEMINI) += clk-gemini.o
-obj-$(CONFIG_COMMON_CLK_ASPEED) += clk-aspeed.o
-obj-$(CONFIG_MACH_ASPEED_G6) += clk-ast2600.o
obj-$(CONFIG_ARCH_HIGHBANK) += clk-highbank.o
obj-$(CONFIG_CLK_HSDK) += clk-hsdk-pll.o
obj-$(CONFIG_COMMON_CLK_K210) += clk-k210.o
@@ -114,6 +112,7 @@ obj-$(CONFIG_COMMON_CLK_XGENE) += clk-xgene.o
# please keep this section sorted lexicographically by directory path name
obj-y += actions/
obj-y += analogbits/
+obj-y += aspeed/
obj-$(CONFIG_COMMON_CLK_AT91) += at91/
obj-$(CONFIG_ARCH_ARTPEC) += axis/
obj-$(CONFIG_ARC_PLAT_AXS10X) += axs10x/
diff --git a/drivers/clk/aspeed/Kconfig b/drivers/clk/aspeed/Kconfig
new file mode 100644
index 000000000000..c59b0a1f581c
--- /dev/null
+++ b/drivers/clk/aspeed/Kconfig
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+config COMMON_CLK_ASPEED
+ bool "Clock driver for Aspeed BMC SoCs"
+ depends on ARCH_ASPEED || COMPILE_TEST
+ default ARCH_ASPEED
+ select MFD_SYSCON
+ select RESET_CONTROLLER
+ help
+ This driver supports the SoC clocks on the Aspeed BMC platforms.
+
+ The G4 and G5 series, including the ast2400 and ast2500, are supported
+ by this driver.
diff --git a/drivers/clk/aspeed/Makefile b/drivers/clk/aspeed/Makefile
new file mode 100644
index 000000000000..7db136b89b1e
--- /dev/null
+++ b/drivers/clk/aspeed/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_COMMON_CLK_ASPEED) += clk-aspeed.o
+obj-$(CONFIG_MACH_ASPEED_G6) += clk-ast2600.o
diff --git a/drivers/clk/clk-aspeed.c b/drivers/clk/aspeed/clk-aspeed.c
similarity index 100%
rename from drivers/clk/clk-aspeed.c
rename to drivers/clk/aspeed/clk-aspeed.c
diff --git a/drivers/clk/clk-aspeed.h b/drivers/clk/aspeed/clk-aspeed.h
similarity index 100%
rename from drivers/clk/clk-aspeed.h
rename to drivers/clk/aspeed/clk-aspeed.h
diff --git a/drivers/clk/clk-ast2600.c b/drivers/clk/aspeed/clk-ast2600.c
similarity index 100%
rename from drivers/clk/clk-ast2600.c
rename to drivers/clk/aspeed/clk-ast2600.c
--
2.34.1
next prev parent reply other threads:[~2025-12-24 5:37 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-24 5:37 [PATCH v16 0/3] Add support for AST2700 clk driver Ryan Chen
2025-12-24 5:37 ` Ryan Chen [this message]
2025-12-25 17:44 ` [PATCH v16 1/3] clk: aspeed: Move the existing ASPEED clk drivers into aspeed subdirectory Brian Masney
2025-12-24 5:37 ` [PATCH v16 2/3] MAINTAINERS: Add entry for ASPEED clock drivers Ryan Chen
2025-12-25 17:45 ` Brian Masney
2025-12-24 5:37 ` [PATCH v16 3/3] clk: aspeed: add AST2700 clock driver Ryan Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251224-upstream_clk-v16-1-8c1318f56c3c@aspeedtech.com \
--to=ryan_chen@aspeedtech.com \
--cc=andrew@codeconstruct.com.au \
--cc=bmasney@redhat.com \
--cc=joel@jms.id.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®