[PATCH v7 0/3] media: qcom: camss: Add camss TPG support for multiple targets

[Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>]

This series adds driver changes to bring up the TPG interfaces 
in LeMans, Monaco, Hamoa.

We have tested this on LeMans EVK board and qcs8300-ride board and
Hamoa EVK board with 'Test Pattern Generator'.
Unlike CSID TPG, this TPG can be seen as a combination of CSIPHY
and sensor.

Tested with following commands:
- media-ctl --reset
- media-ctl -V '"msm_tpg0":0[fmt:SRGGB10/4608x2592 field:none]'
- media-ctl -V '"msm_csid0":0[fmt:SRGGB10/4608x2592 field:none]'
- media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4608x2592 field:none]'
- media-ctl -l '"msm_tpg0":1->"msm_csid0":0[1]'
- media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
- v4l2-ctl -d /dev/v4l-subdev4 -c test_pattern=9
- yavta -B capture-mplane -n 5 -f SRGGB10P -s 4608x2592 /dev/video2
  --capture=7

Changes in V7:
- Add TPG support for Hamoa
- Add differentiation of register bitfields based on hardware version number.
- Fix the null pointer issue when TPG clock is 0.
- Correct the clock dependency for TPG.
- Link to V6: https://lore.kernel.org/all/20251114-camss_tpg-v6-0-38d3d9fbe339@oss.qualcomm.com/

Changes in V6:
- Addressed comments from Bryan and Konrad.
- Add exception handling for the streamon format.
- Link to V5: https://lore.kernel.org/all/20251017-camss_tpg-v5-0-cafe3ad42163@oss.qualcomm.com/

Changes in V5:
- Modify the commit message and change the chip names to LeMans and Monaco.
- Add the header file to resolve the compilation error.
- Remove the definition where tpg_num is 0.
- Link to v4: https://lore.kernel.org/all/20250925-camss_tpg-v4-0-d2eb099902c8@oss.qualcomm.com/

Changes in V4:
- Rebase changes
- Use GENMASK to define bit fields and avoid using tabs. Use FIELD_PREP and FIELD_GET uniformly to access bit fields.
- Link to V3: https://lore.kernel.org/all/20250822-camss_tpg-v3-0-c7833a5f10d0@quicinc.com/

Changes in V3:
- Change the payload mode string
- Change the method for setting the TPG clock rate
- Remove the TPG IRQ
- Format correction
- Remove unused variables
- Merge functions and eliminate redundancy
- Modify the register write method
- Change TPG matching method to use grp_id
- Encapsulate magic numbers as macros
- Link to V2: https://lore.kernel.org/all/20250717-lemans_tpg-v2-0-a2538659349c@quicinc.com/

Changes in V2:
- rebase tpg changes based on new versions of sa8775p and qcs8300 camss patches
- Link to V1: https://lore.kernel.org/all/20250211-sa8775p_tpg-v1-0-3f76c5f8431f@quicinc.com/

---
Wenmeng Liu (3):
      media: qcom: camss: Add common TPG support
      media: qcom: camss: Add link support for TPG
      media: qcom: camss: tpg: Add TPG support for multiple targets

 drivers/media/platform/qcom/camss/Makefile         |   2 +
 drivers/media/platform/qcom/camss/camss-csid-680.c |  16 +
 .../media/platform/qcom/camss/camss-csid-gen3.c    |  16 +
 drivers/media/platform/qcom/camss/camss-csid.c     |  43 +-
 drivers/media/platform/qcom/camss/camss-csiphy.c   |   1 +
 drivers/media/platform/qcom/camss/camss-csiphy.h   |   2 +
 drivers/media/platform/qcom/camss/camss-tpg-gen1.c | 257 ++++++++
 drivers/media/platform/qcom/camss/camss-tpg.c      | 710 +++++++++++++++++++++
 drivers/media/platform/qcom/camss/camss-tpg.h      | 127 ++++
 drivers/media/platform/qcom/camss/camss.c          | 183 ++++++
 drivers/media/platform/qcom/camss/camss.h          |   5 +
 11 files changed, 1348 insertions(+), 14 deletions(-)
---
base-commit: cc3aa43b44bdb43dfbac0fcb51c56594a11338a8
change-id: 20251226-camss_tpg-b23a398bb65a

Best regards,
-- 
Wenmeng <wenmeng.liu@oss.qualcomm.com>