From: Chi Zhiling <chizhiling@163.com>
To: linux-fsdevel@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Namjae Jeon <linkinjeon@kernel.org>,
Sungjong Seo <sj1557.seo@samsung.com>,
Yuezhang Mo <yuezhang.mo@sony.com>,
Alexander Viro <viro@zeniv.linux.org.uk>,
Christian Brauner <brauner@kernel.org>, Jan Kara <jack@suse.cz>,
Matthew Wilcox <willy@infradead.org>,
Chi Zhiling <chizhiling@kylinos.cn>
Subject: [PATCH v1 8/9] exfat: support multi-cluster for exfat_map_cluster
Date: Fri, 26 Dec 2025 17:44:39 +0800 [thread overview]
Message-ID: <20251226094440.455563-9-chizhiling@163.com> (raw)
In-Reply-To: <20251226094440.455563-1-chizhiling@163.com>
From: Chi Zhiling <chizhiling@kylinos.cn>
This patch introduces a parameter 'count' to support fetching multiple
clusters in exfat_map_cluster. The returned 'count' indicates the number
of consecutive clusters, or 0 when the input cluster offset is past EOF.
And the 'count' is also an input parameter for the caller to specify the
required number of clusters.
Only NO_FAT_CHAIN files enable multi-cluster fetching in this patch.
After this patch, the time proportion of exfat_get_block has decreased,
The performance data is as follows:
Cluster size: 512 bytes
Sequential read of a 30GB NO_FAT_CHAIN file:
2.4GB/s -> 2.5 GB/s
proportion of exfat_get_block:
10.8% -> 0.02%
Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn>
---
fs/exfat/inode.c | 33 ++++++++++++++++++++-------------
1 file changed, 20 insertions(+), 13 deletions(-)
diff --git a/fs/exfat/inode.c b/fs/exfat/inode.c
index 1062ce470cb1..8c49ab15eafe 100644
--- a/fs/exfat/inode.c
+++ b/fs/exfat/inode.c
@@ -124,7 +124,7 @@ void exfat_sync_inode(struct inode *inode)
* *clu = (~0), if it's unable to allocate a new cluster
*/
static int exfat_map_cluster(struct inode *inode, unsigned int clu_offset,
- unsigned int *clu, int create)
+ unsigned int *clu, unsigned int *count, int create)
{
int ret;
unsigned int last_clu;
@@ -147,20 +147,23 @@ static int exfat_map_cluster(struct inode *inode, unsigned int clu_offset,
*clu = last_clu = ei->start_clu;
- if (ei->flags == ALLOC_NO_FAT_CHAIN) {
- if (clu_offset > 0 && *clu != EXFAT_EOF_CLUSTER) {
- last_clu += clu_offset - 1;
-
- if (clu_offset == num_clusters)
- *clu = EXFAT_EOF_CLUSTER;
- else
- *clu += clu_offset;
+ if (*clu == EXFAT_EOF_CLUSTER) {
+ *count = 0;
+ } else if (ei->flags == ALLOC_NO_FAT_CHAIN) {
+ last_clu += num_clusters - 1;
+ if (clu_offset < num_clusters) {
+ *clu += clu_offset;
+ *count = num_clusters - clu_offset;
+ } else {
+ *clu = EXFAT_EOF_CLUSTER;
+ *count = 0;
}
} else if (ei->type == TYPE_FILE) {
int err = exfat_get_cluster(inode, clu_offset,
clu, &last_clu);
if (err)
return -EIO;
+ *count = (*clu == EXFAT_EOF_CLUSTER) ? 0 : 1;
} else {
unsigned int fclus = 0;
/* hint information */
@@ -178,6 +181,7 @@ static int exfat_map_cluster(struct inode *inode, unsigned int clu_offset,
return -EIO;
fclus++;
}
+ *count = (*clu == EXFAT_EOF_CLUSTER) ? 0 : 1;
}
if (*clu == EXFAT_EOF_CLUSTER) {
@@ -249,7 +253,7 @@ static int exfat_map_cluster(struct inode *inode, unsigned int clu_offset,
num_to_be_allocated--;
}
}
-
+ *count = 1;
}
/* hint information */
@@ -268,7 +272,7 @@ static int exfat_get_block(struct inode *inode, sector_t iblock,
unsigned long max_blocks = bh_result->b_size >> inode->i_blkbits;
int err = 0;
unsigned long mapped_blocks = 0;
- unsigned int cluster, sec_offset;
+ unsigned int cluster, sec_offset, count;
sector_t last_block;
sector_t phys = 0;
sector_t valid_blks;
@@ -281,8 +285,9 @@ static int exfat_get_block(struct inode *inode, sector_t iblock,
goto done;
/* Is this block already allocated? */
+ count = EXFAT_B_TO_CLU_ROUND_UP(bh_result->b_size, sbi);
err = exfat_map_cluster(inode, iblock >> sbi->sect_per_clus_bits,
- &cluster, create);
+ &cluster, &count, create);
if (err) {
if (err != -ENOSPC)
exfat_fs_error_ratelimit(sb,
@@ -293,12 +298,14 @@ static int exfat_get_block(struct inode *inode, sector_t iblock,
if (cluster == EXFAT_EOF_CLUSTER)
goto done;
+ if (WARN_ON_ONCE(!count))
+ count = 1;
/* sector offset in cluster */
sec_offset = iblock & (sbi->sect_per_clus - 1);
phys = exfat_cluster_to_sector(sbi, cluster) + sec_offset;
- mapped_blocks = sbi->sect_per_clus - sec_offset;
+ mapped_blocks = count * sbi->sect_per_clus - sec_offset;
max_blocks = min(mapped_blocks, max_blocks);
map_bh(bh_result, sb, phys);
--
2.43.0
next prev parent reply other threads:[~2025-12-26 9:45 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-26 9:44 [PATCH v1 0/9] Enable exfat_get_block to support obtaining multiple clusters Chi Zhiling
2025-12-26 9:44 ` [PATCH v1 1/9] exfat: add cache option for __exfat_ent_get Chi Zhiling
2025-12-26 9:44 ` [PATCH v1 2/9] exfat: support reuse buffer head for exfat_ent_get Chi Zhiling
2025-12-26 9:44 ` [PATCH v1 3/9] exfat: reuse cache to improve exfat_get_cluster Chi Zhiling
2025-12-26 9:44 ` [PATCH v1 4/9] exfat: improve exfat_count_num_clusters Chi Zhiling
2025-12-26 9:44 ` [PATCH v1 5/9] exfat: improve exfat_find_last_cluster Chi Zhiling
2025-12-26 9:44 ` [PATCH v1 6/9] exfat: remove unused parameters from exfat_get_cluster Chi Zhiling
2025-12-26 9:44 ` [PATCH v1 7/9] exfat: tweak exfat_cache_lookup to support zero offset cluster Chi Zhiling
2025-12-26 9:44 ` Chi Zhiling [this message]
2025-12-26 9:44 ` [PATCH v1 9/9] exfat: support multi-cluster for exfat_get_cluster Chi Zhiling
2025-12-30 9:06 [PATCH v1 8/9] exfat: support multi-cluster for exfat_map_cluster Yuezhang.Mo
2025-12-31 1:51 ` Chi Zhiling
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251226094440.455563-9-chizhiling@163.com \
--to=chizhiling@163.com \
--cc=brauner@kernel.org \
--cc=chizhiling@kylinos.cn \
--cc=jack@suse.cz \
--cc=linkinjeon@kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sj1557.seo@samsung.com \
--cc=viro@zeniv.linux.org.uk \
--cc=willy@infradead.org \
--cc=yuezhang.mo@sony.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®