From: Josua Mayer <josua@solid-run.com>
To: Ulf Hansson <ulf.hansson@linaro.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <magnus.damm@gmail.com>,
Wolfram Sang <wsa+renesas@sang-engineering.com>,
Marc Kleine-Budde <mkl@pengutronix.de>,
Vincent Mailhol <mailhol@kernel.org>,
Vinod Koul <vkoul@kernel.org>,
Kishon Vijay Abraham I <kishon@kernel.org>,
Peter Rosin <peda@axentia.se>,
Aaro Koskinen <aaro.koskinen@iki.fi>,
Andreas Kemnade <andreas@kemnade.info>,
Kevin Hilman <khilman@baylibre.com>,
Roger Quadros <rogerq@kernel.org>,
Tony Lindgren <tony@atomide.com>, Vignesh R <vigneshr@ti.com>,
Janusz Krzysztofik <jmkrzyszt@gmail.com>,
Andi Shyti <andi.shyti@kernel.org>,
Neil Armstrong <neil.armstrong@linaro.org>
Cc: Mikhail Anikin <mikhail.anikin@solid-run.com>,
Yazan Shhady <yazan.shhady@solid-run.com>,
Jon Nettleton <jon@solid-run.com>,
linux-mmc@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
linux-can@vger.kernel.org, linux-phy@lists.infradead.org,
linux-omap@vger.kernel.org, linux-i2c@vger.kernel.org,
Josua Mayer <josua@solid-run.com>
Subject: [PATCH v4 7/7] mmc: host: renesas_sdhi_core: support selecting an optional mux
Date: Mon, 29 Dec 2025 15:27:31 +0100 [thread overview]
Message-ID: <20251229-rz-sdio-mux-v4-7-a023e55758fe@solid-run.com> (raw)
In-Reply-To: <20251229-rz-sdio-mux-v4-0-a023e55758fe@solid-run.com>
Some hardware designs route data or control signals through a mux to
support multiple devices on a single sdhi controller.
In particular SolidRun RZ/G2L/G2LC/V2L System on Module use a mux for
switching between soldered eMMC and an optional microSD on a carrier
board, e.g. for development or provisioning.
SD/SDIO/eMMC are not well suited for runtime switching between different
cards, however boot-time selection is possible and useful - in
particular considering dt overlays.
Add support for an optional SD/SDIO/eMMC mux defined in dt, and select
it during probe.
Similar functionality already exists in other places, e.g. i2c-omap.
Signed-off-by: Josua Mayer <josua@solid-run.com>
---
drivers/mmc/host/renesas_sdhi.h | 1 +
drivers/mmc/host/renesas_sdhi_core.c | 16 +++++++++++++---
2 files changed, 14 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/host/renesas_sdhi.h b/drivers/mmc/host/renesas_sdhi.h
index afc36a407c2c1..6f4c389a5bfe2 100644
--- a/drivers/mmc/host/renesas_sdhi.h
+++ b/drivers/mmc/host/renesas_sdhi.h
@@ -98,6 +98,7 @@ struct renesas_sdhi {
struct reset_control *rstc;
struct tmio_mmc_host *host;
struct regulator_dev *rdev;
+ struct mux_state *mux_state;
};
#define host_to_priv(host) \
diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c
index 2a310a1457855..cec7e5fa5aa96 100644
--- a/drivers/mmc/host/renesas_sdhi_core.c
+++ b/drivers/mmc/host/renesas_sdhi_core.c
@@ -26,6 +26,7 @@
#include <linux/mmc/mmc.h>
#include <linux/mmc/slot-gpio.h>
#include <linux/module.h>
+#include <linux/mux/consumer.h>
#include <linux/pinctrl/consumer.h>
#include <linux/pinctrl/pinctrl-state.h>
#include <linux/platform_data/tmio.h>
@@ -1116,9 +1117,15 @@ int renesas_sdhi_probe(struct platform_device *pdev,
"state_uhs");
}
+ priv->mux_state = devm_mux_state_get_optional_selected(&pdev->dev, NULL);
+ if (IS_ERR(priv->mux_state))
+ return PTR_ERR(priv->mux_state);
+
host = tmio_mmc_host_alloc(pdev, mmc_data);
- if (IS_ERR(host))
- return PTR_ERR(host);
+ if (IS_ERR(host)) {
+ ret = PTR_ERR(host);
+ goto edselmux;
+ }
priv->host = host;
@@ -1201,7 +1208,7 @@ int renesas_sdhi_probe(struct platform_device *pdev,
ret = renesas_sdhi_clk_enable(host);
if (ret)
- return ret;
+ goto edselmux;
rcfg.of_node = of_get_available_child_by_name(dev->of_node, "vqmmc-regulator");
if (rcfg.of_node) {
@@ -1305,6 +1312,9 @@ int renesas_sdhi_probe(struct platform_device *pdev,
edisclk:
renesas_sdhi_clk_disable(host);
+edselmux:
+ if (priv->mux_state)
+ mux_state_deselect(priv->mux_state);
return ret;
}
EXPORT_SYMBOL_GPL(renesas_sdhi_probe);
--
2.51.0
next prev parent reply other threads:[~2025-12-29 14:28 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-29 14:27 [PATCH v4 0/7] mmc: host: renesas_sdhi_core: support configuring an optional sdio mux Josua Mayer
2025-12-29 14:27 ` [PATCH v4 1/7] phy: can-transceiver: rename temporary helper function to avoid conflict Josua Mayer
2025-12-29 14:27 ` [PATCH v4 2/7] mux: Add helper functions for getting optional and selected mux-state Josua Mayer
2025-12-31 19:18 ` kernel test robot
2026-01-08 7:42 ` Josua Mayer
2026-01-08 7:45 ` Krzysztof Kozlowski
2025-12-29 14:27 ` [PATCH v4 3/7] mux: add help text for MULTIPLEXER config option Josua Mayer
2025-12-29 14:27 ` [PATCH v4 4/7] phy: can-transceiver: drop temporary helper getting optional mux-state Josua Mayer
2025-12-29 14:27 ` [PATCH v4 5/7] i2c: omap: switch to new generic helper for getting selected mux-state Josua Mayer
2026-01-14 11:52 ` Wolfram Sang
2025-12-29 14:27 ` [PATCH v4 6/7] dt-bindings: mmc: renesas,sdhi: Add mux-states property Josua Mayer
2025-12-29 14:27 ` Josua Mayer [this message]
2026-01-14 11:49 ` [PATCH v4 7/7] mmc: host: renesas_sdhi_core: support selecting an optional mux Wolfram Sang
2026-01-18 7:33 ` Josua Mayer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251229-rz-sdio-mux-v4-7-a023e55758fe@solid-run.com \
--to=josua@solid-run.com \
--cc=aaro.koskinen@iki.fi \
--cc=andi.shyti@kernel.org \
--cc=andreas@kemnade.info \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=jmkrzyszt@gmail.com \
--cc=jon@solid-run.com \
--cc=khilman@baylibre.com \
--cc=kishon@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-can@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=mailhol@kernel.org \
--cc=mikhail.anikin@solid-run.com \
--cc=mkl@pengutronix.de \
--cc=neil.armstrong@linaro.org \
--cc=peda@axentia.se \
--cc=robh@kernel.org \
--cc=rogerq@kernel.org \
--cc=tony@atomide.com \
--cc=ulf.hansson@linaro.org \
--cc=vigneshr@ti.com \
--cc=vkoul@kernel.org \
--cc=wsa+renesas@sang-engineering.com \
--cc=yazan.shhady@solid-run.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®