From: Yu-Chun Lin <eleanor.lin@realtek.com>
To: <mturquette@baylibre.com>, <sboyd@kernel.org>, <robh@kernel.org>,
<krzk+dt@kernel.org>, <conor+dt@kernel.org>,
<p.zabel@pengutronix.de>, <cylee12@realtek.com>,
<jyanchou@realtek.com>
Cc: <devicetree@vger.kernel.org>, <linux-clk@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <james.tai@realtek.com>,
<cy.huang@realtek.com>, <stanley_chang@realtek.com>,
<eleanor.lin@realtek.com>
Subject: [PATCH 5/9] clk: realtek: Add support for gate clock
Date: Mon, 29 Dec 2025 15:53:09 +0800 [thread overview]
Message-ID: <20251229075313.27254-6-eleanor.lin@realtek.com> (raw)
In-Reply-To: <20251229075313.27254-1-eleanor.lin@realtek.com>
Introduce clk_regmap_gate_ops supporting enable, disable, is_enabled, and
disable_unused for standard regmap gate clocks.
Add clk_regmap_gate_ro_ops as a read-only variant exposing only is_enabled.
Signed-off-by: Cheng-Yu Lee <cylee12@realtek.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
---
drivers/clk/realtek/Makefile | 2 +
drivers/clk/realtek/clk-regmap-gate.c | 72 +++++++++++++++++++++++++++
drivers/clk/realtek/clk-regmap-gate.h | 65 ++++++++++++++++++++++++
3 files changed, 139 insertions(+)
create mode 100644 drivers/clk/realtek/clk-regmap-gate.c
create mode 100644 drivers/clk/realtek/clk-regmap-gate.h
diff --git a/drivers/clk/realtek/Makefile b/drivers/clk/realtek/Makefile
index c173ea3b10e3..97058d48a176 100644
--- a/drivers/clk/realtek/Makefile
+++ b/drivers/clk/realtek/Makefile
@@ -2,6 +2,8 @@
obj-$(CONFIG_RTK_CLK_COMMON) += clk-rtk.o
clk-rtk-y += common.o
+
clk-rtk-y += clk-pll.o
+clk-rtk-y += clk-regmap-gate.o
clk-rtk-y += freq_table.o
clk-rtk-y += reset.o
diff --git a/drivers/clk/realtek/clk-regmap-gate.c b/drivers/clk/realtek/clk-regmap-gate.c
new file mode 100644
index 000000000000..9a2e77c29924
--- /dev/null
+++ b/drivers/clk/realtek/clk-regmap-gate.c
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2017 Realtek Semiconductor Corporation
+ * Author: Cheng-Yu Lee <cylee12@realtek.com>
+ */
+
+#include "clk-regmap-gate.h"
+
+static int clk_regmap_gate_enable(struct clk_hw *hw)
+{
+ struct clk_regmap_gate *clkg = to_clk_regmap_gate(hw);
+ unsigned int mask;
+ unsigned int val;
+
+ mask = BIT(clkg->bit_idx);
+ val = BIT(clkg->bit_idx);
+
+ if (clkg->write_en) {
+ mask |= BIT(clkg->bit_idx + 1);
+ val |= BIT(clkg->bit_idx + 1);
+ }
+
+ regmap_update_bits(clkg->clkr.regmap, clkg->gate_ofs, mask, val);
+
+ return 0;
+}
+
+static void clk_regmap_gate_disable(struct clk_hw *hw)
+{
+ struct clk_regmap_gate *clkg = to_clk_regmap_gate(hw);
+ unsigned int mask;
+ unsigned int val;
+
+ mask = BIT(clkg->bit_idx);
+ val = 0;
+
+ if (clkg->write_en) {
+ mask |= BIT(clkg->bit_idx + 1);
+ val |= BIT(clkg->bit_idx + 1);
+ }
+
+ regmap_update_bits(clkg->clkr.regmap, clkg->gate_ofs, mask, val);
+}
+
+static void clk_regmap_gate_disable_unused(struct clk_hw *hw)
+{
+ clk_regmap_gate_disable(hw);
+}
+
+static int clk_regmap_gate_is_enabled(struct clk_hw *hw)
+{
+ struct clk_regmap_gate *clkg = to_clk_regmap_gate(hw);
+ int ret;
+ u32 val;
+
+ regmap_read(clkg->clkr.regmap, clkg->gate_ofs, &val);
+ ret = val & BIT(clkg->bit_idx);
+ return !!ret;
+}
+
+const struct clk_ops clk_regmap_gate_ops = {
+ .enable = clk_regmap_gate_enable,
+ .disable = clk_regmap_gate_disable,
+ .is_enabled = clk_regmap_gate_is_enabled,
+ .disable_unused = clk_regmap_gate_disable_unused,
+};
+EXPORT_SYMBOL_GPL(clk_regmap_gate_ops);
+
+const struct clk_ops clk_regmap_gate_ro_ops = {
+ .is_enabled = clk_regmap_gate_is_enabled,
+};
+EXPORT_SYMBOL_GPL(clk_regmap_gate_ro_ops);
diff --git a/drivers/clk/realtek/clk-regmap-gate.h b/drivers/clk/realtek/clk-regmap-gate.h
new file mode 100644
index 000000000000..41cbe27865a7
--- /dev/null
+++ b/drivers/clk/realtek/clk-regmap-gate.h
@@ -0,0 +1,65 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2017 Realtek Semiconductor Corporation
+ * Author: Cheng-Yu Lee <cylee12@realtek.com>
+ */
+
+#ifndef __CLK_REALTEK_CLK_REGMAP_GATE_H
+#define __CLK_REALTEK_CLK_REGMAP_GATE_H
+
+#include "common.h"
+
+struct clk_regmap_gate {
+ struct clk_regmap clkr;
+ int gate_ofs;
+ u8 bit_idx;
+ u32 write_en : 1;
+};
+
+#define __clk_regmap_gate_hw(_p) __clk_regmap_hw(&(_p)->clkr)
+
+#define __CLK_REGMAP_GATE(_name, _parent, _ops, _flags, _ofs, _bit_idx, \
+ _write_en) \
+ struct clk_regmap_gate _name = { \
+ .clkr.hw.init = CLK_HW_INIT(#_name, _parent, _ops, _flags), \
+ .gate_ofs = _ofs, \
+ .bit_idx = _bit_idx, \
+ .write_en = _write_en, \
+ }
+
+#define CLK_REGMAP_GATE(_name, _parent, _flags, _ofs, _bit_idx, _write_en) \
+ __CLK_REGMAP_GATE(_name, _parent, &clk_regmap_gate_ops, _flags, _ofs, \
+ _bit_idx, _write_en)
+
+#define CLK_REGMAP_GATE_RO(_name, _parent, _flags, _ofs, _bit_idx, _write_en) \
+ __CLK_REGMAP_GATE(_name, _parent, &clk_regmap_gate_ro_ops, _flags, \
+ _ofs, _bit_idx, _write_en)
+
+#define __CLK_REGMAP_GATE_NO_PARENT(_name, _ops, _flags, _ofs, _bit_idx, \
+ _write_en) \
+ struct clk_regmap_gate _name = { \
+ .clkr.hw.init = CLK_HW_INIT_NO_PARENT(#_name, _ops, _flags), \
+ .gate_ofs = _ofs, \
+ .bit_idx = _bit_idx, \
+ .write_en = _write_en, \
+ }
+
+#define CLK_REGMAP_GATE_NO_PARENT(_name, _flags, _ofs, _bit_idx, _write_en) \
+ __CLK_REGMAP_GATE_NO_PARENT(_name, &clk_regmap_gate_ops, _flags, _ofs, \
+ _bit_idx, _write_en)
+
+#define CLK_REGMAP_GATE_NO_PARENT_RO(_name, _flags, _ofs, _bit_idx, _write_en) \
+ __CLK_REGMAP_GATE_NO_PARENT(_name, &clk_regmap_gate_ro_ops, _flags, \
+ _ofs, _bit_idx, _write_en)
+
+static inline struct clk_regmap_gate *to_clk_regmap_gate(struct clk_hw *hw)
+{
+ struct clk_regmap *clkr = to_clk_regmap(hw);
+
+ return container_of(clkr, struct clk_regmap_gate, clkr);
+}
+
+extern const struct clk_ops clk_regmap_gate_ops;
+extern const struct clk_ops clk_regmap_gate_ro_ops;
+
+#endif /* __CLK_REALTEK_CLK_REGMAP_GATE_H */
--
2.34.1
next prev parent reply other threads:[~2025-12-29 7:53 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-29 7:53 [PATCH 0/9] clk: realtek: Add RTD1625 Clock Support Yu-Chun Lin
2025-12-29 7:53 ` [PATCH 1/9] dt-bindings: clock: Add Realtek RTD1625 Clock & Reset Controller Yu-Chun Lin
2025-12-30 12:11 ` Krzysztof Kozlowski
2026-01-02 5:46 ` Yu-Chun Lin [林祐君]
2025-12-29 7:53 ` [PATCH 2/9] clk: realtek: Add basic reset support Yu-Chun Lin
2025-12-30 12:20 ` Krzysztof Kozlowski
2026-01-02 5:56 ` Yu-Chun Lin [林祐君]
2025-12-29 7:53 ` [PATCH 3/9] clk: realtek: Introduce a common probe() Yu-Chun Lin
2025-12-30 12:17 ` Krzysztof Kozlowski
2025-12-30 18:03 ` kernel test robot
2025-12-30 18:14 ` kernel test robot
2025-12-29 7:53 ` [PATCH 4/9] clk: realtek: Add support for phase locked loops (PLLs) Yu-Chun Lin
2025-12-30 20:18 ` kernel test robot
2025-12-29 7:53 ` Yu-Chun Lin [this message]
2025-12-29 7:53 ` [PATCH 6/9] clk: realtek: Add support for mux clock Yu-Chun Lin
2026-01-05 12:04 ` Dan Carpenter
2025-12-29 7:53 ` [PATCH 7/9] clk: realtek: Add support for MMC-tuned PLL clocks Yu-Chun Lin
2025-12-29 7:53 ` [PATCH 8/9] clk: realtek: Add RTD1625-CRT clock controller driver Yu-Chun Lin
2025-12-30 12:15 ` Krzysztof Kozlowski
2025-12-29 7:53 ` [PATCH 9/9] clk: realtek: Add RTD1625-ISO " Yu-Chun Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251229075313.27254-6-eleanor.lin@realtek.com \
--to=eleanor.lin@realtek.com \
--cc=conor+dt@kernel.org \
--cc=cy.huang@realtek.com \
--cc=cylee12@realtek.com \
--cc=devicetree@vger.kernel.org \
--cc=james.tai@realtek.com \
--cc=jyanchou@realtek.com \
--cc=krzk+dt@kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=stanley_chang@realtek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®