From: Aleksander Jan Bajkowski <olek2@wp.pl>
To: ansuelsmth@gmail.com, atenart@kernel.org,
herbert@gondor.apana.org.au, davem@davemloft.net,
vschagen@icloud.com, linux-crypto@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Aleksander Jan Bajkowski <olek2@wp.pl>
Subject: [PATCH] crypto: inside-secure/eip93 - unregister only available algorithm
Date: Wed, 31 Dec 2025 00:51:57 +0100 [thread overview]
Message-ID: <20251230235222.2113987-1-olek2@wp.pl> (raw)
EIP93 has an options register. This register indicates which crypto
algorithms are implemented in silicon. Supported algorithms are
registered on this basis. Unregister algorithms on the same basis.
Currently, all algorithms are unregistered, even those not supported
by HW. This results in panic on platforms that don't have all options
implemented in silicon.
Fixes: 9739f5f93b78 ("crypto: eip93 - Add Inside Secure SafeXcel EIP-93 crypto engine support")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
---
.../crypto/inside-secure/eip93/eip93-main.c | 107 ++++++++++--------
1 file changed, 61 insertions(+), 46 deletions(-)
diff --git a/drivers/crypto/inside-secure/eip93/eip93-main.c b/drivers/crypto/inside-secure/eip93/eip93-main.c
index 3cdc3308dcac..dfac2b23e2d9 100644
--- a/drivers/crypto/inside-secure/eip93/eip93-main.c
+++ b/drivers/crypto/inside-secure/eip93/eip93-main.c
@@ -77,11 +77,65 @@ inline void eip93_irq_clear(struct eip93_device *eip93, u32 mask)
__raw_writel(mask, eip93->base + EIP93_REG_INT_CLR);
}
-static void eip93_unregister_algs(unsigned int i)
+static int eip93_algo_is_supported(struct eip93_alg_template *eip93_algo,
+ u32 supported_algo_flags)
+{
+ u32 alg_flags = eip93_algo->flags;
+
+ if ((IS_DES(alg_flags) || IS_3DES(alg_flags)) &&
+ !(supported_algo_flags & EIP93_PE_OPTION_TDES))
+ return 0;
+
+ if (IS_AES(alg_flags)) {
+ if (!(supported_algo_flags & EIP93_PE_OPTION_AES))
+ return 0;
+
+ if (!IS_HMAC(alg_flags)) {
+ if (supported_algo_flags & EIP93_PE_OPTION_AES_KEY128)
+ eip93_algo->alg.skcipher.max_keysize =
+ AES_KEYSIZE_128;
+
+ if (supported_algo_flags & EIP93_PE_OPTION_AES_KEY192)
+ eip93_algo->alg.skcipher.max_keysize =
+ AES_KEYSIZE_192;
+
+ if (supported_algo_flags & EIP93_PE_OPTION_AES_KEY256)
+ eip93_algo->alg.skcipher.max_keysize =
+ AES_KEYSIZE_256;
+
+ if (IS_RFC3686(alg_flags))
+ eip93_algo->alg.skcipher.max_keysize +=
+ CTR_RFC3686_NONCE_SIZE;
+ }
+ }
+
+ if (IS_HASH_MD5(alg_flags) &&
+ !(supported_algo_flags & EIP93_PE_OPTION_MD5))
+ return 0;
+
+ if (IS_HASH_SHA1(alg_flags) &&
+ !(supported_algo_flags & EIP93_PE_OPTION_SHA_1))
+ return 0;
+
+ if (IS_HASH_SHA224(alg_flags) &&
+ !(supported_algo_flags & EIP93_PE_OPTION_SHA_224))
+ return 0;
+
+ if (IS_HASH_SHA256(alg_flags) &&
+ !(supported_algo_flags & EIP93_PE_OPTION_SHA_256))
+ return 0;
+
+ return 1;
+}
+
+static void eip93_unregister_algs(u32 supported_algo_flags, unsigned int i)
{
unsigned int j;
for (j = 0; j < i; j++) {
+ if (!eip93_algo_is_supported(eip93_algs[j], supported_algo_flags))
+ continue;
+
switch (eip93_algs[j]->type) {
case EIP93_ALG_TYPE_SKCIPHER:
crypto_unregister_skcipher(&eip93_algs[j]->alg.skcipher);
@@ -102,51 +156,9 @@ static int eip93_register_algs(struct eip93_device *eip93, u32 supported_algo_fl
int ret = 0;
for (i = 0; i < ARRAY_SIZE(eip93_algs); i++) {
- u32 alg_flags = eip93_algs[i]->flags;
-
eip93_algs[i]->eip93 = eip93;
- if ((IS_DES(alg_flags) || IS_3DES(alg_flags)) &&
- !(supported_algo_flags & EIP93_PE_OPTION_TDES))
- continue;
-
- if (IS_AES(alg_flags)) {
- if (!(supported_algo_flags & EIP93_PE_OPTION_AES))
- continue;
-
- if (!IS_HMAC(alg_flags)) {
- if (supported_algo_flags & EIP93_PE_OPTION_AES_KEY128)
- eip93_algs[i]->alg.skcipher.max_keysize =
- AES_KEYSIZE_128;
-
- if (supported_algo_flags & EIP93_PE_OPTION_AES_KEY192)
- eip93_algs[i]->alg.skcipher.max_keysize =
- AES_KEYSIZE_192;
-
- if (supported_algo_flags & EIP93_PE_OPTION_AES_KEY256)
- eip93_algs[i]->alg.skcipher.max_keysize =
- AES_KEYSIZE_256;
-
- if (IS_RFC3686(alg_flags))
- eip93_algs[i]->alg.skcipher.max_keysize +=
- CTR_RFC3686_NONCE_SIZE;
- }
- }
-
- if (IS_HASH_MD5(alg_flags) &&
- !(supported_algo_flags & EIP93_PE_OPTION_MD5))
- continue;
-
- if (IS_HASH_SHA1(alg_flags) &&
- !(supported_algo_flags & EIP93_PE_OPTION_SHA_1))
- continue;
-
- if (IS_HASH_SHA224(alg_flags) &&
- !(supported_algo_flags & EIP93_PE_OPTION_SHA_224))
- continue;
-
- if (IS_HASH_SHA256(alg_flags) &&
- !(supported_algo_flags & EIP93_PE_OPTION_SHA_256))
+ if (!eip93_algo_is_supported(eip93_algs[i], supported_algo_flags))
continue;
switch (eip93_algs[i]->type) {
@@ -167,7 +179,7 @@ static int eip93_register_algs(struct eip93_device *eip93, u32 supported_algo_fl
return 0;
fail:
- eip93_unregister_algs(i);
+ eip93_unregister_algs(supported_algo_flags, i);
return ret;
}
@@ -469,8 +481,11 @@ static int eip93_crypto_probe(struct platform_device *pdev)
static void eip93_crypto_remove(struct platform_device *pdev)
{
struct eip93_device *eip93 = platform_get_drvdata(pdev);
+ u32 algo_flags;
+
+ algo_flags = readl(eip93->base + EIP93_REG_PE_OPTION_1);
- eip93_unregister_algs(ARRAY_SIZE(eip93_algs));
+ eip93_unregister_algs(algo_flags, ARRAY_SIZE(eip93_algs));
eip93_cleanup(eip93);
}
--
2.47.3
next reply other threads:[~2025-12-30 23:52 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-30 23:51 Aleksander Jan Bajkowski [this message]
2026-01-05 15:01 ` Antoine Tenart
2026-01-10 17:24 ` Aleksander Jan Bajkowski
2026-01-11 13:20 Aleksander Jan Bajkowski
2026-01-12 8:56 ` Antoine Tenart
2026-01-31 2:48 ` Herbert Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251230235222.2113987-1-olek2@wp.pl \
--to=olek2@wp.pl \
--cc=ansuelsmth@gmail.com \
--cc=atenart@kernel.org \
--cc=davem@davemloft.net \
--cc=herbert@gondor.apana.org.au \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=vschagen@icloud.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®