From: Xiaolei Wang <xiaolei.wang@windriver.com>
To: tarang.raval@siliconsignals.io,
laurent.pinchart@ideasonboard.com, sakari.ailus@linux.intel.com,
dave.stevenson@raspberrypi.com, jacopo@jmondi.org,
mchehab@kernel.org, prabhakar.mahadev-lad.rj@bp.renesas.com,
hverkuil+cisco@kernel.org, johannes.goede@oss.qualcomm.com,
hverkuil-cisco@xs4all.nl, jai.luthra@ideasonboard.com,
xiaolei.wang@windriver.com
Cc: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 1/3] media: i2c: ov5647: Convert to CCI register access helpers
Date: Wed, 31 Dec 2025 16:39:22 +0800 [thread overview]
Message-ID: <20251231083924.2657165-2-xiaolei.wang@windriver.com> (raw)
In-Reply-To: <20251231083924.2657165-1-xiaolei.wang@windriver.com>
Use the new common CCI register access helpers to replace the private
register access helpers in the ov5647 driver. This simplifies the driver
by reducing the amount of code.
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
---
drivers/media/i2c/Kconfig | 1 +
drivers/media/i2c/ov5647.c | 289 +++++++++++++------------------------
2 files changed, 99 insertions(+), 191 deletions(-)
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 4b4db8c4f496..cce63349e71e 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -529,6 +529,7 @@ config VIDEO_OV5645
config VIDEO_OV5647
tristate "OmniVision OV5647 sensor support"
+ select V4L2_CCI_I2C
help
This is a Video4Linux2 sensor driver for the OmniVision
OV5647 camera.
diff --git a/drivers/media/i2c/ov5647.c b/drivers/media/i2c/ov5647.c
index e193fef4fced..cbcb760ba5cd 100644
--- a/drivers/media/i2c/ov5647.c
+++ b/drivers/media/i2c/ov5647.c
@@ -20,8 +20,10 @@
#include <linux/module.h>
#include <linux/of_graph.h>
#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/videodev2.h>
+#include <media/v4l2-cci.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
#include <media/v4l2-event.h>
@@ -41,24 +43,19 @@
#define MIPI_CTRL00_BUS_IDLE BIT(2)
#define MIPI_CTRL00_CLOCK_LANE_DISABLE BIT(0)
-#define OV5647_SW_STANDBY 0x0100
-#define OV5647_SW_RESET 0x0103
-#define OV5647_REG_CHIPID_H 0x300a
-#define OV5647_REG_CHIPID_L 0x300b
-#define OV5640_REG_PAD_OUT 0x300d
-#define OV5647_REG_EXP_HI 0x3500
-#define OV5647_REG_EXP_MID 0x3501
-#define OV5647_REG_EXP_LO 0x3502
-#define OV5647_REG_AEC_AGC 0x3503
-#define OV5647_REG_GAIN_HI 0x350a
-#define OV5647_REG_GAIN_LO 0x350b
-#define OV5647_REG_VTS_HI 0x380e
-#define OV5647_REG_VTS_LO 0x380f
-#define OV5647_REG_FRAME_OFF_NUMBER 0x4202
-#define OV5647_REG_MIPI_CTRL00 0x4800
-#define OV5647_REG_MIPI_CTRL14 0x4814
-#define OV5647_REG_AWB 0x5001
-#define OV5647_REG_ISPCTRL3D 0x503d
+#define OV5647_SW_STANDBY CCI_REG8(0x0100)
+#define OV5647_SW_RESET CCI_REG8(0x0103)
+#define OV5647_REG_CHIPID CCI_REG16(0x300a)
+#define OV5640_REG_PAD_OUT CCI_REG8(0x300d)
+#define OV5647_REG_EXPOSURE CCI_REG24(0x3500)
+#define OV5647_REG_AEC_AGC CCI_REG8(0x3503)
+#define OV5647_REG_GAIN CCI_REG16(0x350a)
+#define OV5647_REG_VTS CCI_REG16(0x380e)
+#define OV5647_REG_FRAME_OFF_NUMBER CCI_REG8(0x4202)
+#define OV5647_REG_MIPI_CTRL00 CCI_REG8(0x4800)
+#define OV5647_REG_MIPI_CTRL14 CCI_REG8(0x4814)
+#define OV5647_REG_AWB CCI_REG8(0x5001)
+#define OV5647_REG_ISPCTRL3D CCI_REG8(0x503d)
#define REG_TERM 0xfffe
#define VAL_TERM 0xfe
@@ -81,23 +78,19 @@
#define OV5647_EXPOSURE_DEFAULT 1000
#define OV5647_EXPOSURE_MAX 65535
-struct regval_list {
- u16 addr;
- u8 data;
-};
-
struct ov5647_mode {
struct v4l2_mbus_framefmt format;
struct v4l2_rect crop;
u64 pixel_rate;
int hts;
int vts;
- const struct regval_list *reg_list;
+ const struct reg_sequence *reg_list;
unsigned int num_regs;
};
struct ov5647 {
struct v4l2_subdev sd;
+ struct regmap *regmap;
struct media_pad pad;
struct mutex lock;
struct clk *xclk;
@@ -130,19 +123,19 @@ static const u8 ov5647_test_pattern_val[] = {
0x81, /* Random Data */
};
-static const struct regval_list sensor_oe_disable_regs[] = {
+static const struct reg_sequence sensor_oe_disable_regs[] = {
{0x3000, 0x00},
{0x3001, 0x00},
{0x3002, 0x00},
};
-static const struct regval_list sensor_oe_enable_regs[] = {
+static const struct reg_sequence sensor_oe_enable_regs[] = {
{0x3000, 0x0f},
{0x3001, 0xff},
{0x3002, 0xe4},
};
-static struct regval_list ov5647_2592x1944_10bpp[] = {
+static const struct reg_sequence ov5647_2592x1944_10bpp[] = {
{0x0100, 0x00},
{0x0103, 0x01},
{0x3034, 0x1a},
@@ -230,8 +223,7 @@ static struct regval_list ov5647_2592x1944_10bpp[] = {
{0x3503, 0x03},
{0x0100, 0x01},
};
-
-static struct regval_list ov5647_1080p30_10bpp[] = {
+static const struct reg_sequence ov5647_1080p30_10bpp[] = {
{0x0100, 0x00},
{0x0103, 0x01},
{0x3034, 0x1a},
@@ -320,7 +312,7 @@ static struct regval_list ov5647_1080p30_10bpp[] = {
{0x0100, 0x01},
};
-static struct regval_list ov5647_2x2binned_10bpp[] = {
+static const struct reg_sequence ov5647_2x2binned_10bpp[] = {
{0x0100, 0x00},
{0x0103, 0x01},
{0x3034, 0x1a},
@@ -413,7 +405,7 @@ static struct regval_list ov5647_2x2binned_10bpp[] = {
{0x0100, 0x01},
};
-static struct regval_list ov5647_640x480_10bpp[] = {
+static const struct reg_sequence ov5647_640x480_10bpp[] = {
{0x0100, 0x00},
{0x0103, 0x01},
{0x3035, 0x11},
@@ -594,109 +586,35 @@ static const struct ov5647_mode ov5647_modes[] = {
#define OV5647_DEFAULT_MODE (&ov5647_modes[3])
#define OV5647_DEFAULT_FORMAT (ov5647_modes[3].format)
-static int ov5647_write16(struct v4l2_subdev *sd, u16 reg, u16 val)
-{
- unsigned char data[4] = { reg >> 8, reg & 0xff, val >> 8, val & 0xff};
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- int ret;
-
- ret = i2c_master_send(client, data, 4);
- if (ret < 0) {
- dev_dbg(&client->dev, "%s: i2c write error, reg: %x\n",
- __func__, reg);
- return ret;
- }
-
- return 0;
-}
-
-static int ov5647_write(struct v4l2_subdev *sd, u16 reg, u8 val)
-{
- unsigned char data[3] = { reg >> 8, reg & 0xff, val};
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- int ret;
-
- ret = i2c_master_send(client, data, 3);
- if (ret < 0) {
- dev_dbg(&client->dev, "%s: i2c write error, reg: %x\n",
- __func__, reg);
- return ret;
- }
-
- return 0;
-}
-
-static int ov5647_read(struct v4l2_subdev *sd, u16 reg, u8 *val)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- u8 buf[2] = { reg >> 8, reg & 0xff };
- struct i2c_msg msg[2];
- int ret;
-
- msg[0].addr = client->addr;
- msg[0].flags = client->flags;
- msg[0].buf = buf;
- msg[0].len = sizeof(buf);
-
- msg[1].addr = client->addr;
- msg[1].flags = client->flags | I2C_M_RD;
- msg[1].buf = buf;
- msg[1].len = 1;
-
- ret = i2c_transfer(client->adapter, msg, 2);
- if (ret != 2) {
- dev_err(&client->dev, "%s: i2c read error, reg: %x = %d\n",
- __func__, reg, ret);
- return ret >= 0 ? -EINVAL : ret;
- }
-
- *val = buf[0];
-
- return 0;
-}
-
-static int ov5647_write_array(struct v4l2_subdev *sd,
- const struct regval_list *regs, int array_size)
-{
- int i, ret;
-
- for (i = 0; i < array_size; i++) {
- ret = ov5647_write(sd, regs[i].addr, regs[i].data);
- if (ret < 0)
- return ret;
- }
-
- return 0;
-}
-
static int ov5647_set_virtual_channel(struct v4l2_subdev *sd, int channel)
{
- u8 channel_id;
+ struct ov5647 *sensor = to_sensor(sd);
+ u64 channel_id;
int ret;
- ret = ov5647_read(sd, OV5647_REG_MIPI_CTRL14, &channel_id);
+ ret = cci_read(sensor->regmap, OV5647_REG_MIPI_CTRL14, &channel_id, NULL);
if (ret < 0)
return ret;
channel_id &= ~(3 << 6);
- return ov5647_write(sd, OV5647_REG_MIPI_CTRL14,
- channel_id | (channel << 6));
+ return cci_write(sensor->regmap, OV5647_REG_MIPI_CTRL14,
+ channel_id | (channel << 6), NULL);
}
static int ov5647_set_mode(struct v4l2_subdev *sd)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
struct ov5647 *sensor = to_sensor(sd);
- u8 resetval, rdval;
+ u64 resetval, rdval;
int ret;
- ret = ov5647_read(sd, OV5647_SW_STANDBY, &rdval);
+ ret = cci_read(sensor->regmap, OV5647_SW_STANDBY, &rdval, NULL);
if (ret < 0)
return ret;
- ret = ov5647_write_array(sd, sensor->mode->reg_list,
- sensor->mode->num_regs);
+ ret = regmap_multi_reg_write(sensor->regmap, sensor->mode->reg_list,
+ sensor->mode->num_regs);
if (ret < 0) {
dev_err(&client->dev, "write sensor default regs error\n");
return ret;
@@ -706,13 +624,13 @@ static int ov5647_set_mode(struct v4l2_subdev *sd)
if (ret < 0)
return ret;
- ret = ov5647_read(sd, OV5647_SW_STANDBY, &resetval);
+ ret = cci_read(sensor->regmap, OV5647_SW_STANDBY, &resetval, NULL);
if (ret < 0)
return ret;
if (!(resetval & 0x01)) {
dev_err(&client->dev, "Device was in SW standby");
- ret = ov5647_write(sd, OV5647_SW_STANDBY, 0x01);
+ ret = cci_write(sensor->regmap, OV5647_SW_STANDBY, 0x01, NULL);
if (ret < 0)
return ret;
}
@@ -725,7 +643,7 @@ static int ov5647_stream_on(struct v4l2_subdev *sd)
struct i2c_client *client = v4l2_get_subdevdata(sd);
struct ov5647 *sensor = to_sensor(sd);
u8 val = MIPI_CTRL00_BUS_IDLE;
- int ret;
+ int ret = 0;
ret = ov5647_set_mode(sd);
if (ret) {
@@ -742,32 +660,25 @@ static int ov5647_stream_on(struct v4l2_subdev *sd)
val |= MIPI_CTRL00_CLOCK_LANE_GATE |
MIPI_CTRL00_LINE_SYNC_ENABLE;
- ret = ov5647_write(sd, OV5647_REG_MIPI_CTRL00, val);
- if (ret < 0)
- return ret;
-
- ret = ov5647_write(sd, OV5647_REG_FRAME_OFF_NUMBER, 0x00);
- if (ret < 0)
- return ret;
+ cci_write(sensor->regmap, OV5647_REG_MIPI_CTRL00, val, &ret);
+ cci_write(sensor->regmap, OV5647_REG_FRAME_OFF_NUMBER, 0x00, &ret);
+ cci_write(sensor->regmap, OV5640_REG_PAD_OUT, 0x00, &ret);
- return ov5647_write(sd, OV5640_REG_PAD_OUT, 0x00);
+ return ret;
}
static int ov5647_stream_off(struct v4l2_subdev *sd)
{
- int ret;
+ struct ov5647 *sensor = to_sensor(sd);
+ int ret = 0;
- ret = ov5647_write(sd, OV5647_REG_MIPI_CTRL00,
- MIPI_CTRL00_CLOCK_LANE_GATE | MIPI_CTRL00_BUS_IDLE |
- MIPI_CTRL00_CLOCK_LANE_DISABLE);
- if (ret < 0)
- return ret;
+ cci_write(sensor->regmap, OV5647_REG_MIPI_CTRL00,
+ MIPI_CTRL00_CLOCK_LANE_GATE | MIPI_CTRL00_BUS_IDLE |
+ MIPI_CTRL00_CLOCK_LANE_DISABLE, &ret);
+ cci_write(sensor->regmap, OV5647_REG_FRAME_OFF_NUMBER, 0x0f, &ret);
+ cci_write(sensor->regmap, OV5640_REG_PAD_OUT, 0x01, &ret);
- ret = ov5647_write(sd, OV5647_REG_FRAME_OFF_NUMBER, 0x0f);
- if (ret < 0)
- return ret;
-
- return ov5647_write(sd, OV5640_REG_PAD_OUT, 0x01);
+ return ret;
}
static int ov5647_power_on(struct device *dev)
@@ -788,8 +699,8 @@ static int ov5647_power_on(struct device *dev)
goto error_pwdn;
}
- ret = ov5647_write_array(&sensor->sd, sensor_oe_enable_regs,
- ARRAY_SIZE(sensor_oe_enable_regs));
+ ret = regmap_multi_reg_write(sensor->regmap, sensor_oe_enable_regs,
+ ARRAY_SIZE(sensor_oe_enable_regs));
if (ret < 0) {
dev_err(dev, "write sensor_oe_enable_regs error\n");
goto error_clk_disable;
@@ -815,23 +726,23 @@ static int ov5647_power_on(struct device *dev)
static int ov5647_power_off(struct device *dev)
{
struct ov5647 *sensor = dev_get_drvdata(dev);
- u8 rdval;
+ u64 rdval;
int ret;
dev_dbg(dev, "OV5647 power off\n");
- ret = ov5647_write_array(&sensor->sd, sensor_oe_disable_regs,
- ARRAY_SIZE(sensor_oe_disable_regs));
+ ret = regmap_multi_reg_write(sensor->regmap, sensor_oe_disable_regs,
+ ARRAY_SIZE(sensor_oe_disable_regs));
if (ret < 0)
dev_dbg(dev, "disable oe failed\n");
/* Enter software standby */
- ret = ov5647_read(&sensor->sd, OV5647_SW_STANDBY, &rdval);
+ ret = cci_read(sensor->regmap, OV5647_SW_STANDBY, &rdval, NULL);
if (ret < 0)
dev_dbg(dev, "software standby failed\n");
rdval &= ~0x01;
- ret = ov5647_write(&sensor->sd, OV5647_SW_STANDBY, rdval);
+ ret = cci_write(sensor->regmap, OV5647_SW_STANDBY, rdval, NULL);
if (ret < 0)
dev_dbg(dev, "software standby failed\n");
@@ -845,10 +756,11 @@ static int ov5647_power_off(struct device *dev)
static int ov5647_sensor_get_register(struct v4l2_subdev *sd,
struct v4l2_dbg_register *reg)
{
+ struct ov5647 *sensor = to_sensor(sd);
int ret;
- u8 val;
+ u64 val;
- ret = ov5647_read(sd, reg->reg & 0xff, &val);
+ ret = cci_read(sensor->regmap, reg->reg & 0xff, &val, NULL);
if (ret < 0)
return ret;
@@ -861,7 +773,9 @@ static int ov5647_sensor_get_register(struct v4l2_subdev *sd,
static int ov5647_sensor_set_register(struct v4l2_subdev *sd,
const struct v4l2_dbg_register *reg)
{
- return ov5647_write(sd, reg->reg & 0xff, reg->val & 0xff);
+ struct ov5647 *sensor = to_sensor(sd);
+
+ return cci_write(sensor->regmap, reg->reg & 0xff, reg->val & 0xff, NULL);
}
#endif
@@ -1089,33 +1003,27 @@ static const struct v4l2_subdev_ops ov5647_subdev_ops = {
static int ov5647_detect(struct v4l2_subdev *sd)
{
+ struct ov5647 *sensor = to_sensor(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
- u8 read;
+ u64 read;
int ret;
- ret = ov5647_write(sd, OV5647_SW_RESET, 0x01);
+ ret = cci_write(sensor->regmap, OV5647_SW_RESET, 0x01, NULL);
if (ret < 0)
return ret;
- ret = ov5647_read(sd, OV5647_REG_CHIPID_H, &read);
- if (ret < 0)
- return ret;
-
- if (read != 0x56) {
- dev_err(&client->dev, "ID High expected 0x56 got %x", read);
- return -ENODEV;
- }
-
- ret = ov5647_read(sd, OV5647_REG_CHIPID_L, &read);
+ ret = cci_read(sensor->regmap, OV5647_REG_CHIPID, &read, NULL);
if (ret < 0)
- return ret;
+ return dev_err_probe(&client->dev, ret,
+ "failed to read chip id %x\n",
+ OV5647_REG_CHIPID);
- if (read != 0x47) {
- dev_err(&client->dev, "ID Low expected 0x47 got %x", read);
+ if (read != 0x5647) {
+ dev_err(&client->dev, "Chip ID expected 0x5647 got 0x%llx", read);
return -ENODEV;
}
- return ov5647_write(sd, OV5647_SW_RESET, 0x00);
+ return cci_write(sensor->regmap, OV5647_SW_RESET, 0x00, NULL);
}
static int ov5647_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
@@ -1140,70 +1048,62 @@ static const struct v4l2_subdev_internal_ops ov5647_subdev_internal_ops = {
static int ov5647_s_auto_white_balance(struct v4l2_subdev *sd, u32 val)
{
- return ov5647_write(sd, OV5647_REG_AWB, val ? 1 : 0);
+ struct ov5647 *sensor = to_sensor(sd);
+
+ return cci_write(sensor->regmap, OV5647_REG_AWB, val ? 1 : 0, NULL);
}
static int ov5647_s_autogain(struct v4l2_subdev *sd, u32 val)
{
+ struct ov5647 *sensor = to_sensor(sd);
int ret;
- u8 reg;
+ u64 reg;
/* Non-zero turns on AGC by clearing bit 1.*/
- ret = ov5647_read(sd, OV5647_REG_AEC_AGC, ®);
+ ret = cci_read(sensor->regmap, OV5647_REG_AEC_AGC, ®, NULL);
if (ret)
return ret;
- return ov5647_write(sd, OV5647_REG_AEC_AGC, val ? reg & ~BIT(1)
- : reg | BIT(1));
+ return cci_write(sensor->regmap, OV5647_REG_AEC_AGC, val ? reg & ~BIT(1)
+ : reg | BIT(1), NULL);
}
static int ov5647_s_exposure_auto(struct v4l2_subdev *sd, u32 val)
{
+ struct ov5647 *sensor = to_sensor(sd);
int ret;
- u8 reg;
+ u64 reg;
/*
* Everything except V4L2_EXPOSURE_MANUAL turns on AEC by
* clearing bit 0.
*/
- ret = ov5647_read(sd, OV5647_REG_AEC_AGC, ®);
+ ret = cci_read(sensor->regmap, OV5647_REG_AEC_AGC, ®, NULL);
if (ret)
return ret;
- return ov5647_write(sd, OV5647_REG_AEC_AGC,
+ return cci_write(sensor->regmap, OV5647_REG_AEC_AGC,
val == V4L2_EXPOSURE_MANUAL ? reg | BIT(0)
- : reg & ~BIT(0));
+ : reg & ~BIT(0), NULL);
}
static int ov5647_s_analogue_gain(struct v4l2_subdev *sd, u32 val)
{
- int ret;
+ struct ov5647 *sensor = to_sensor(sd);
/* 10 bits of gain, 2 in the high register. */
- ret = ov5647_write(sd, OV5647_REG_GAIN_HI, (val >> 8) & 3);
- if (ret)
- return ret;
-
- return ov5647_write(sd, OV5647_REG_GAIN_LO, val & 0xff);
+ return cci_write(sensor->regmap, OV5647_REG_GAIN, val & 0x3ff, NULL);
}
static int ov5647_s_exposure(struct v4l2_subdev *sd, u32 val)
{
- int ret;
+ struct ov5647 *sensor = to_sensor(sd);
/*
* Sensor has 20 bits, but the bottom 4 bits are fractions of a line
* which we leave as zero (and don't receive in "val").
*/
- ret = ov5647_write(sd, OV5647_REG_EXP_HI, (val >> 12) & 0xf);
- if (ret)
- return ret;
-
- ret = ov5647_write(sd, OV5647_REG_EXP_MID, (val >> 4) & 0xff);
- if (ret)
- return ret;
-
- return ov5647_write(sd, OV5647_REG_EXP_LO, (val & 0xf) << 4);
+ return cci_write(sensor->regmap, OV5647_REG_EXPOSURE, val << 4, NULL);
}
static int ov5647_s_ctrl(struct v4l2_ctrl *ctrl)
@@ -1254,12 +1154,12 @@ static int ov5647_s_ctrl(struct v4l2_ctrl *ctrl)
ret = ov5647_s_exposure(sd, ctrl->val);
break;
case V4L2_CID_VBLANK:
- ret = ov5647_write16(sd, OV5647_REG_VTS_HI,
- sensor->mode->format.height + ctrl->val);
+ ret = cci_write(sensor->regmap, OV5647_REG_VTS,
+ sensor->mode->format.height + ctrl->val, NULL);
break;
case V4L2_CID_TEST_PATTERN:
- ret = ov5647_write(sd, OV5647_REG_ISPCTRL3D,
- ov5647_test_pattern_val[ctrl->val]);
+ ret = cci_write(sensor->regmap, OV5647_REG_ISPCTRL3D,
+ ov5647_test_pattern_val[ctrl->val], NULL);
break;
/* Read-only, but we adjust it based on mode. */
@@ -1435,6 +1335,13 @@ static int ov5647_probe(struct i2c_client *client)
if (ret < 0)
goto ctrl_handler_free;
+ sensor->regmap = devm_cci_regmap_init_i2c(client, 16);
+ if (IS_ERR(sensor->regmap)) {
+ ret = dev_err_probe(dev, PTR_ERR(sensor->regmap),
+ "Failed to init CCI\n");
+ goto entity_cleanup;
+ }
+
ret = ov5647_power_on(dev);
if (ret)
goto entity_cleanup;
--
2.43.0
next prev parent reply other threads:[~2025-12-31 8:40 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-31 8:39 [PATCH v3 0/3] media: i2c: ov5647: Modernize driver with CCI and new stream APIs Xiaolei Wang
2025-12-31 8:39 ` Xiaolei Wang [this message]
2025-12-31 10:26 ` [PATCH v3 1/3] media: i2c: ov5647: Convert to CCI register access helpers Tarang Raval
2026-01-01 1:31 ` xiaolei wang
2025-12-31 12:12 ` johannes.goede
2025-12-31 8:39 ` [PATCH v3 2/3] media: i2c: ov5647: Switch to using the sub-device state lock Xiaolei Wang
2025-12-31 10:54 ` Tarang Raval
2026-01-01 2:03 ` xiaolei wang
2025-12-31 8:39 ` [PATCH v3 3/3] media: i2c: ov5647: switch to {enable,disable}_streams Xiaolei Wang
2025-12-31 11:03 ` Tarang Raval
2026-01-01 2:04 ` xiaolei wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251231083924.2657165-2-xiaolei.wang@windriver.com \
--to=xiaolei.wang@windriver.com \
--cc=dave.stevenson@raspberrypi.com \
--cc=hverkuil+cisco@kernel.org \
--cc=hverkuil-cisco@xs4all.nl \
--cc=jacopo@jmondi.org \
--cc=jai.luthra@ideasonboard.com \
--cc=johannes.goede@oss.qualcomm.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=sakari.ailus@linux.intel.com \
--cc=tarang.raval@siliconsignals.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®