From: Xiaolei Wang <xiaolei.wang@windriver.com>
To: tarang.raval@siliconsignals.io,
laurent.pinchart@ideasonboard.com, sakari.ailus@linux.intel.com,
dave.stevenson@raspberrypi.com, jacopo@jmondi.org,
mchehab@kernel.org, prabhakar.mahadev-lad.rj@bp.renesas.com,
hverkuil+cisco@kernel.org, johannes.goede@oss.qualcomm.com,
hverkuil-cisco@xs4all.nl, jai.luthra@ideasonboard.com,
Xiaolei.Wang@windriver.com
Cc: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v4 3/3] media: i2c: ov5647: switch to {enable,disable}_streams
Date: Thu, 1 Jan 2026 18:30:01 +0800 [thread overview]
Message-ID: <20260101103001.207194-4-xiaolei.wang@windriver.com> (raw)
In-Reply-To: <20260101103001.207194-1-xiaolei.wang@windriver.com>
Switch from s_stream to enable_streams and disable_streams callbacks.
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tarang Raval <tarang.raval@siliconsignals.io>
---
drivers/media/i2c/ov5647.c | 89 ++++++++++++++++----------------------
1 file changed, 38 insertions(+), 51 deletions(-)
diff --git a/drivers/media/i2c/ov5647.c b/drivers/media/i2c/ov5647.c
index 822804633d0f..35ec65a0e578 100644
--- a/drivers/media/i2c/ov5647.c
+++ b/drivers/media/i2c/ov5647.c
@@ -635,23 +635,42 @@ static int ov5647_set_mode(struct v4l2_subdev *sd)
return 0;
}
-static int ov5647_stream_on(struct v4l2_subdev *sd)
+static int ov5647_stream_stop(struct ov5647 *sensor)
+{
+ int ret = 0;
+
+ cci_write(sensor->regmap, OV5647_REG_MIPI_CTRL00,
+ MIPI_CTRL00_CLOCK_LANE_GATE | MIPI_CTRL00_BUS_IDLE |
+ MIPI_CTRL00_CLOCK_LANE_DISABLE, &ret);
+ cci_write(sensor->regmap, OV5647_REG_FRAME_OFF_NUMBER, 0x0f, &ret);
+ cci_write(sensor->regmap, OV5640_REG_PAD_OUT, 0x01, &ret);
+
+ return ret;
+}
+
+static int ov5647_enable_streams(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *state, u32 pad,
+ u64 streams_mask)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
struct ov5647 *sensor = to_sensor(sd);
u8 val = MIPI_CTRL00_BUS_IDLE;
int ret;
+ ret = pm_runtime_resume_and_get(&client->dev);
+ if (ret < 0)
+ return ret;
+
ret = ov5647_set_mode(sd);
if (ret) {
dev_err(&client->dev, "Failed to program sensor mode: %d\n", ret);
- return ret;
+ goto done;
}
/* Apply customized values from user when stream starts. */
ret = __v4l2_ctrl_handler_setup(sd->ctrl_handler);
if (ret)
- return ret;
+ goto done;
if (sensor->clock_ncont)
val |= MIPI_CTRL00_CLOCK_LANE_GATE |
@@ -661,19 +680,24 @@ static int ov5647_stream_on(struct v4l2_subdev *sd)
cci_write(sensor->regmap, OV5647_REG_FRAME_OFF_NUMBER, 0x00, &ret);
cci_write(sensor->regmap, OV5640_REG_PAD_OUT, 0x00, &ret);
+done:
+ if (ret)
+ pm_runtime_put(&client->dev);
+
return ret;
}
-static int ov5647_stream_off(struct v4l2_subdev *sd)
+static int ov5647_disable_streams(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *state, u32 pad,
+ u64 streams_mask)
{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
struct ov5647 *sensor = to_sensor(sd);
- int ret = 0;
+ int ret;
- cci_write(sensor->regmap, OV5647_REG_MIPI_CTRL00,
- MIPI_CTRL00_CLOCK_LANE_GATE | MIPI_CTRL00_BUS_IDLE |
- MIPI_CTRL00_CLOCK_LANE_DISABLE, &ret);
- cci_write(sensor->regmap, OV5647_REG_FRAME_OFF_NUMBER, 0x0f, &ret);
- cci_write(sensor->regmap, OV5640_REG_PAD_OUT, 0x01, &ret);
+ ret = ov5647_stream_stop(sensor);
+
+ pm_runtime_put(&client->dev);
return ret;
}
@@ -704,7 +728,7 @@ static int ov5647_power_on(struct device *dev)
}
/* Stream off to coax lanes into LP-11 state. */
- ret = ov5647_stream_off(&sensor->sd);
+ ret = ov5647_stream_stop(sensor);
if (ret < 0) {
dev_err(dev, "camera not available, check power\n");
goto error_clk_disable;
@@ -795,47 +819,8 @@ __ov5647_get_pad_crop(struct ov5647 *ov5647,
return NULL;
}
-static int ov5647_s_stream(struct v4l2_subdev *sd, int enable)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct v4l2_subdev_state *state;
- int ret;
-
- state = v4l2_subdev_lock_and_get_active_state(sd);
-
- if (enable) {
- ret = pm_runtime_resume_and_get(&client->dev);
- if (ret < 0)
- goto error_unlock;
-
- ret = ov5647_stream_on(sd);
- if (ret < 0) {
- dev_err(&client->dev, "stream start failed: %d\n", ret);
- goto error_pm;
- }
- } else {
- ret = ov5647_stream_off(sd);
- if (ret < 0) {
- dev_err(&client->dev, "stream stop failed: %d\n", ret);
- goto error_pm;
- }
- pm_runtime_put(&client->dev);
- }
-
- v4l2_subdev_unlock_state(state);
-
- return 0;
-
-error_pm:
- pm_runtime_put(&client->dev);
-error_unlock:
- v4l2_subdev_unlock_state(state);
-
- return ret;
-}
-
static const struct v4l2_subdev_video_ops ov5647_subdev_video_ops = {
- .s_stream = ov5647_s_stream,
+ .s_stream = v4l2_subdev_s_stream_helper,
};
static int ov5647_enum_mbus_code(struct v4l2_subdev *sd,
@@ -978,6 +963,8 @@ static const struct v4l2_subdev_pad_ops ov5647_subdev_pad_ops = {
.set_fmt = ov5647_set_pad_fmt,
.get_fmt = ov5647_get_pad_fmt,
.get_selection = ov5647_get_selection,
+ .enable_streams = ov5647_enable_streams,
+ .disable_streams = ov5647_disable_streams,
};
static const struct v4l2_subdev_ops ov5647_subdev_ops = {
--
2.43.0
prev parent reply other threads:[~2026-01-01 10:31 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-01 10:29 [PATCH v4 0/3] media: i2c: ov5647: Modernize driver with CCI and new stream APIs Xiaolei Wang
2026-01-01 10:29 ` [PATCH v4 1/3] media: i2c: ov5647: Convert to CCI register access helpers Xiaolei Wang
2026-01-01 11:15 ` johannes.goede
2026-01-01 11:15 ` johannes.goede
2026-01-01 10:30 ` [PATCH v4 2/3] media: i2c: ov5647: Switch to using the sub-device state lock Xiaolei Wang
2026-01-07 22:38 ` Sakari Ailus
2026-01-08 0:51 ` xiaolei wang
2026-01-01 10:30 ` Xiaolei Wang [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260101103001.207194-4-xiaolei.wang@windriver.com \
--to=xiaolei.wang@windriver.com \
--cc=dave.stevenson@raspberrypi.com \
--cc=hverkuil+cisco@kernel.org \
--cc=hverkuil-cisco@xs4all.nl \
--cc=jacopo@jmondi.org \
--cc=jai.luthra@ideasonboard.com \
--cc=johannes.goede@oss.qualcomm.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=sakari.ailus@linux.intel.com \
--cc=tarang.raval@siliconsignals.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®