[PATCH 2/2] mfd: qnap-mcu: Add driver data for TS133 variant

[Heiko Stuebner <heiko@sntech.de>]

Add the TS133 compatible and affiliated driver data to qnap-mcu.
The TS133 is mostly similar to the TS233/TS433, except only having
one drive and no USB-LED.

The fan pwm-limits from the vendor-configuration also are the same
as for the TS233/TS433 variants.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 drivers/mfd/qnap-mcu.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/mfd/qnap-mcu.c b/drivers/mfd/qnap-mcu.c
index 08e55ff24012..556bc5bb43d9 100644
--- a/drivers/mfd/qnap-mcu.c
+++ b/drivers/mfd/qnap-mcu.c
@@ -444,6 +444,14 @@ static int qnap_mcu_power_off(struct sys_off_data *data)
 	return NOTIFY_DONE;
 }
 
+static const struct qnap_mcu_variant qnap_ts133_mcu = {
+	.baud_rate = 115200,
+	.num_drives = 1,
+	.fan_pwm_min = 51,  /* Specified in original model.conf */
+	.fan_pwm_max = 255,
+	.usb_led = false,
+};
+
 static const struct qnap_mcu_variant qnap_ts233_mcu = {
 	.baud_rate = 115200,
 	.num_drives = 2,
@@ -529,6 +537,7 @@ static int qnap_mcu_probe(struct serdev_device *serdev)
 }
 
 static const struct of_device_id qnap_mcu_dt_ids[] = {
+	{ .compatible = "qnap,ts133-mcu", .data = &qnap_ts133_mcu },
 	{ .compatible = "qnap,ts233-mcu", .data = &qnap_ts233_mcu },
 	{ .compatible = "qnap,ts433-mcu", .data = &qnap_ts433_mcu },
 	{ /* sentinel */ }
-- 
2.47.2