From: Akhila YS <akhilayalmati@gmail.com>
To: Miquel Raynal <miquel.raynal@bootlin.com>,
Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-mtd@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Akhila YS <akhilayalmati@gmail.com>
Subject: [PATCH] dt-bindings: mtd: st,spi-fsm: convert to DT schema
Date: Mon, 05 Jan 2026 16:07:59 +0000 [thread overview]
Message-ID: <20260105-st-fsm-v1-1-d1dd935ccee4@gmail.com> (raw)
Convert STMicroelectronics SPI FSM Serial NOR Flash Controller binding
to YAML format.
Signed-off-by: Akhila YS <akhilayalmati@gmail.com>
---
.../devicetree/bindings/mtd/st,spi-fsm.yaml | 72 ++++++++++++++++++++++
Documentation/devicetree/bindings/mtd/st-fsm.txt | 25 --------
2 files changed, 72 insertions(+), 25 deletions(-)
diff --git a/Documentation/devicetree/bindings/mtd/st,spi-fsm.yaml b/Documentation/devicetree/bindings/mtd/st,spi-fsm.yaml
new file mode 100644
index 000000000000..f374c6aaa185
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/st,spi-fsm.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/st,spi-fsm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics SPI FSM Serial NOR Flash Controller
+
+maintainers:
+ - Miquel Raynal <miquel.raynal@bootlin.com>
+ - Richard Weinberger <richard@nod.at>
+
+description:
+ The STMicroelectronics Fast Sequence Mode (FSM) controller is a dedicated
+ hardware accelerator integrated in older STiH4xx/STiDxxx set-top box SoCs
+ (such as STiH407, STiH416, STiD127). It connects directly to a single
+ external serial flash device used as the primary boot device. The FSM
+ executes hard-coded or configurable instruction sequences in hardware,
+ providing low-latency reads suitable for execute-in-place (XIP) boot
+ and high read bandwidth.
+
+properties:
+ compatible:
+ const: st,spi-fsm
+
+ reg:
+ maxItems: 1
+
+ reg-names:
+ const: spi-fsm
+
+ interrupts:
+ maxItems: 1
+
+ pinctrl-0:
+ maxItems: 1
+
+ st,syscfg:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: Phandle to the system configuration registers used for boot-device selection.
+
+ st,boot-device-reg:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Offset of the boot-device register within the st,syscfg node.
+
+ st,boot-device-spi:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Expected boot-device value when booting from this SPI controller.
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - pinctrl-0
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ spifsm@fe902000 {
+ compatible = "st,spi-fsm";
+ reg = <0xfe902000 0x1000>;
+ reg-names = "spi-fsm";
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-0 = <&pinctrl_fsm>;
+ st,syscfg = <&syscfg_rear>;
+ st,boot-device-reg = <0x958>;
+ st,boot-device-spi = <0x1a>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/mtd/st-fsm.txt b/Documentation/devicetree/bindings/mtd/st-fsm.txt
deleted file mode 100644
index 54cef9ef3083..000000000000
--- a/Documentation/devicetree/bindings/mtd/st-fsm.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* ST-Microelectronics SPI FSM Serial (NOR) Flash Controller
-
-Required properties:
- - compatible : Should be "st,spi-fsm"
- - reg : Contains register's location and length.
- - reg-names : Should contain the reg names "spi-fsm"
- - interrupts : The interrupt number
- - pinctrl-0 : Standard Pinctrl phandle (see: pinctrl/pinctrl-bindings.txt)
-
-Optional properties:
- - st,syscfg : Phandle to boot-device system configuration registers
- - st,boot-device-reg : Address of the aforementioned boot-device register(s)
- - st,boot-device-spi : Expected boot-device value if booted via this device
-
-Example:
- spifsm: spifsm@fe902000{
- compatible = "st,spi-fsm";
- reg = <0xfe902000 0x1000>;
- reg-names = "spi-fsm";
- pinctrl-0 = <&pinctrl_fsm>;
- st,syscfg = <&syscfg_rear>;
- st,boot-device-reg = <0x958>;
- st,boot-device-spi = <0x1a>;
- };
-
---
base-commit: cc3aa43b44bdb43dfbac0fcb51c56594a11338a8
change-id: 20251231-st-fsm-84b343517035
Best regards,
--
Akhila YS <akhilayalmati@gmail.com>
next reply other threads:[~2026-01-05 16:08 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-05 16:07 Akhila YS [this message]
2026-01-05 22:22 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260105-st-fsm-v1-1-d1dd935ccee4@gmail.com \
--to=akhilayalmati@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
--cc=robh@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®