From: Anshul Dalal <anshuld@ti.com>
To: Nishanth Menon <nm@ti.com>, Tero Kristo <kristo@kernel.org>,
"Santosh Shilimkar" <ssantosh@kernel.org>,
Rob Herring <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, "Andrew Davis" <afd@ti.com>
Cc: <linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Vignesh Raghavendra <vigneshr@ti.com>,
"Anshul Dalal" <anshuld@ti.com>
Subject: [PATCH v7] dt-bindings: arm: keystone: add boot_* mboxes to ti,sci
Date: Wed, 7 Jan 2026 16:44:22 +0530 [thread overview]
Message-ID: <20260107-k3_syscon_add_boot_mailboxes-v7-1-d97a943f0a52@ti.com> (raw)
The bootloader on K3 devices makes use of mailboxes as per the ROM spec
which might be different than one's available to the kernel (firmware
spec).
Therefore, this patch adds the missing mailbox entries to the DT binding
if the matching compatible is ti,am654-sci to represent the mailboxes
exposed by the hardware during boot for the purpose of loading the
firmware.
The newly added mboxes are made optional by keeping minItems as 2 to
remain compliant with existing device-trees. The new 'notify' channel is
not supported on all SoCs and is therefore kept at last in the list.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
---
Changes in v7:
- Removed ti,am642-sci compatible
- Keep examples unchanged
- Modify ti,am654-sci ordering to ensure compliance with SoCs without a notify channel
- Link to v6: https://lore.kernel.org/r/20251222-k3_syscon_add_boot_mailboxes-v6-1-b93ada9f1d47@ti.com
Changes in v6:
- Added ti,am642-sci compatible to represent SoCs without a "notify" channel
- Added new examples instead of editing existing ones
- Link to v5: https://lore.kernel.org/r/20251215-k3_syscon_add_boot_mailboxes-v5-1-5a8fe567fd31@ti.com
Changes in v5:
- Added commit description for the optional mailboxes
- Link to v4: https://lore.kernel.org/r/20251205-k3_syscon_add_boot_mailboxes-v4-1-8e216fb88941@ti.com
Changes in v4:
- Make new boot_* mboxes conditional on ti,am654-sci compatible
- Link to v3: https://lore.kernel.org/r/20251112-k3_syscon_add_boot_mailboxes-v3-1-66155a4236dc@ti.com
Changes in v3:
- Drop [1/2] of the last patch series
- Update existing example with boot_* mailboxes instead of adding a new one
- Link to v2: https://lore.kernel.org/r/20251112-k3_syscon_add_boot_mailboxes-v2-0-aebc1e47b391@ti.com
Changes in v2:
- Remove maxItems entry
- Remove RFC tag from patch (added by mistake in v1)
- Document the new mailboxes in mboxes instead of mbox-names
- Provide example with all the mailboxes set
- Update commit title to have "ti,sci"
- Split into two patches
- Link to v1: https://lore.kernel.org/r/20251111-k3_syscon_add_boot_mailboxes-v1-1-529a27f21076@ti.com
---
.../devicetree/bindings/arm/keystone/ti,sci.yaml | 42 ++++++++++++++++++++--
1 file changed, 39 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml
index 25a2b42105e5..e3f3de0192aa 100644
--- a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml
+++ b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml
@@ -51,15 +51,15 @@ properties:
minItems: 1
mbox-names:
+ minItems: 2
+ maxItems: 6
description: |
Specifies the mailboxes used to communicate with TI-SCI Controller
made available from TI-SCI controller.
- items:
- - const: rx
- - const: tx
mboxes:
minItems: 2
+ maxItems: 6
ti,host-id:
$ref: /schemas/types.yaml#/definitions/uint32
@@ -79,6 +79,42 @@ properties:
type: object
$ref: /schemas/reset/ti,sci-reset.yaml#
+if:
+ properties:
+ compatible:
+ contains:
+ const: ti,am654-sci
+then:
+ properties:
+ mbox-names:
+ minItems: 2
+ items:
+ - const: rx
+ - const: tx
+ - const: boot_rx
+ - const: boot_tx
+ - const: boot_notify
+ - const: notify
+ mboxes:
+ minItems: 2
+ items:
+ - description: RX thread
+ - description: TX thread
+ - description: boot stage RX thread
+ - description: boot stage TX thread
+ - description: boot stage Notify thread
+ - description: Notify thread
+else:
+ properties:
+ mbox-names:
+ items:
+ - const: rx
+ - const: tx
+ mboxes:
+ items:
+ - description: RX thread
+ - description: TX thread
+
required:
- compatible
- mbox-names
---
base-commit: f96074c6d01d8a5e9e2fccd0bba5f2ed654c1f2d
change-id: 20251105-k3_syscon_add_boot_mailboxes-8452bdd98962
Best regards,
--
Anshul Dalal <anshuld@ti.com>
reply other threads:[~2026-01-07 11:14 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260107-k3_syscon_add_boot_mailboxes-v7-1-d97a943f0a52@ti.com \
--to=anshuld@ti.com \
--cc=afd@ti.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kristo@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh@kernel.org \
--cc=ssantosh@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®