[PATCH] drm/msm/dp: Correct LeMans/Monaco DP phy Swing/Emphasis setting

[Yongxing Mou <yongxing.mou@oss.qualcomm.com>]

Currently, the LeMans/Monaco DP PHY operates in DP mode rather than eDP
mode. Per the PHY HPG, the Swing and Emphasis settings have been corrected
to the appropriate DP-mode values.

Additionally, the HPG specifies that the LDO value should be set to 0 when
in DP mode. These misconfigurations can lead to link training failures on
certain dongles.

Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
---
 drivers/phy/qualcomm/phy-qcom-edp.c | 27 ++++++++++++++++++++++++---
 1 file changed, 24 insertions(+), 3 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
index 13feab99feec..5b0d774bd715 100644
--- a/drivers/phy/qualcomm/phy-qcom-edp.c
+++ b/drivers/phy/qualcomm/phy-qcom-edp.c
@@ -122,6 +122,13 @@ static const u8 dp_swing_hbr_rbr[4][4] = {
 	{ 0x1f, 0xff, 0xff, 0xff }
 };
 
+static const u8 dp_swing_hbr_rbr_v1[4][4] = {
+	{ 0x07, 0x0f, 0x16, 0x1f },
+	{ 0x11, 0x1e, 0x1f, 0xff },
+	{ 0x16, 0x1f, 0xff, 0xff },
+	{ 0x1f, 0xff, 0xff, 0xff }
+};
+
 static const u8 dp_pre_emp_hbr_rbr[4][4] = {
 	{ 0x00, 0x0d, 0x14, 0x1a },
 	{ 0x00, 0x0e, 0x15, 0xff },
@@ -129,6 +136,13 @@ static const u8 dp_pre_emp_hbr_rbr[4][4] = {
 	{ 0x03, 0xff, 0xff, 0xff }
 };
 
+static const u8 dp_pre_emp_hbr_rbr_v1[4][4] = {
+	{ 0x00, 0x0e, 0x15, 0x1a },
+	{ 0x00, 0x0e, 0x15, 0xff },
+	{ 0x00, 0x0e, 0xff, 0xff },
+	{ 0x04, 0xff, 0xff, 0xff }
+};
+
 static const u8 dp_swing_hbr2_hbr3[4][4] = {
 	{ 0x02, 0x12, 0x16, 0x1a },
 	{ 0x09, 0x19, 0x1f, 0xff },
@@ -150,6 +164,13 @@ static const struct qcom_edp_swing_pre_emph_cfg dp_phy_swing_pre_emph_cfg = {
 	.pre_emphasis_hbr3_hbr2 = &dp_pre_emp_hbr2_hbr3,
 };
 
+static const struct qcom_edp_swing_pre_emph_cfg dp_phy_swing_pre_emph_cfg_v1 = {
+	.swing_hbr_rbr = &dp_swing_hbr_rbr_v1,
+	.swing_hbr3_hbr2 = &dp_swing_hbr2_hbr3,
+	.pre_emphasis_hbr_rbr = &dp_pre_emp_hbr_rbr_v1,
+	.pre_emphasis_hbr3_hbr2 = &dp_pre_emp_hbr2_hbr3,
+};
+
 static const u8 edp_swing_hbr_rbr[4][4] = {
 	{ 0x07, 0x0f, 0x16, 0x1f },
 	{ 0x0d, 0x16, 0x1e, 0xff },
@@ -321,7 +342,7 @@ static int qcom_edp_set_voltages(struct qcom_edp *edp, const struct phy_configur
 	if (swing == 0xff || emph == 0xff)
 		return -EINVAL;
 
-	ldo_config = edp->is_edp ? 0x0 : 0x1;
+	ldo_config = !edp->is_edp ? 0x0 : 0x1;
 
 	writel(ldo_config, edp->tx0 + TXn_LDO_CONFIG);
 	writel(swing, edp->tx0 + TXn_TX_DRV_LVL);
@@ -564,7 +585,7 @@ static const struct qcom_edp_phy_cfg sa8775p_dp_phy_cfg = {
 	.is_edp = false,
 	.aux_cfg = edp_phy_aux_cfg_v5,
 	.vco_div_cfg = edp_phy_vco_div_cfg_v4,
-	.swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg_v5,
+	.swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg_v1,
 	.ver_ops = &qcom_edp_phy_ops_v4,
 };
 
@@ -962,7 +983,7 @@ static int qcom_edp_phy_power_on(struct phy *phy)
 	if (ret)
 		return ret;
 
-	if (edp->cfg->swing_pre_emph_cfg && !edp->is_edp)
+	if (edp->cfg->swing_pre_emph_cfg && edp->is_edp)
 		ldo_config = 0x1;
 
 	writel(ldo_config, edp->tx0 + TXn_LDO_CONFIG);

---
base-commit: fc4e91c639c0af93d63c3d5bc0ee45515dd7504a
change-id: 20260109-klm_dpphy-8b3a95750f78

Best regards,
-- 
Yongxing Mou <yongxing.mou@oss.qualcomm.com>