[PATCH v3 0/8] drm/msm/dp: Drop the HPD state machine

[Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>]

Currently, all HPD interrupt handling must go through the HPD state
machine.

This has caused many issues where the DRM framework assumes that DP is
in one state while the state machine is stuck in another state.

As discussed here [1], this series:

- Removes the state machine
- Moves link training to atomic_enable()
- Changes the detect() behavior to return true if a display is physically
  plugged in (as opposed to if the DP link is ready).
- Remove event queue and move internal HPD handling to hpd_notify()

I'm not completely satisfied with the PM runtime handling, I might want
to review it at the next iterations or with the another series.

Note: eDP is mostly untested.

[1] https://patchwork.freedesktop.org/patch/656312/?series=142010&rev=2#comment_1201738

---
Changes in v3:
- Take over the series (thanks, Jessica, for the previous work!)
- Major rework of the series, squashed the set of patches touching the
  HPD states and handling, it is easier to do it this way rather than
  pulling the strings one by one.
- Link to v2: https://lore.kernel.org/r/20250808-hpd-refactor-v2-0-7f4e1e741aa3@oss.qualcomm.com

Changes in v2:
- Dropped event queue (Dmitry)
- Moved internal HPD handling to use hpd_notify() (Dmitry)
- Reworked bridge detect() to read DPCP and sink count (Dmitry)
- Moved setting of link_trained to plug/unplugged handling
- Dropped msm_dp::connected (Dmitry)
- Squashed all hpd state related patches (Dmitry)
- Link to v1: https://lore.kernel.org/r/20250711-hpd-refactor-v1-0-33cbac823f34@oss.qualcomm.com

---
Dmitry Baryshkov (1):
      drm/msm/dp: drop event data

Jessica Zhang (7):
      drm/msm/dp: fix HPD state status bit shift value
      drm/msm/dp: Fix the ISR_* enum values
      drm/msm/dp: Read DPCD and sink count in bridge detect()
      drm/msm/dp: Move link training to atomic_enable()
      drm/msm/dp: Drop EV_USER_NOTIFICATION
      drm/msm/dp: rework HPD handling
      drm/msm/dp: Add sink_count and link_ready to debug logs

 drivers/gpu/drm/msm/dp/dp_ctrl.c    |  22 --
 drivers/gpu/drm/msm/dp/dp_ctrl.h    |   1 -
 drivers/gpu/drm/msm/dp/dp_display.c | 673 +++++++++++-------------------------
 drivers/gpu/drm/msm/dp/dp_display.h |   2 +-
 drivers/gpu/drm/msm/dp/dp_drm.c     |  22 +-
 drivers/gpu/drm/msm/dp/dp_drm.h     |   2 +
 drivers/gpu/drm/msm/dp/dp_reg.h     |   4 +-
 7 files changed, 208 insertions(+), 518 deletions(-)
---
base-commit: b775e489bec70895b7ef6b66927886bbac79598f
change-id: 20250523-hpd-refactor-74e25b55620a

Best regards,
-- 
With best wishes
Dmitry