[PATCH 1/5] arm64: dts: qcom: sm6125-xiaomi-ginkgo: Fix volume up button

[Biswapriyo Nath via B4 Relay <devnull+nathbappai.gmail.com@kernel.org>]

From: Biswapriyo Nath <nathbappai@gmail.com>

gpio6 in pm6125 is used for EMMC and UFS thermal monitoring. It is
changed to the correct gpio for volume up button.

Fixes: 9b1a6c925c88 ("arm64: dts: qcom: sm6125: Initial support for xiaomi-ginkgo")

Signed-off-by: Biswapriyo Nath <nathbappai@gmail.com>
---
 arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo-common.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo-common.dtsi b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo-common.dtsi
index 2605d0c94..6e0333378 100644
--- a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo-common.dtsi
@@ -85,7 +85,7 @@ gpio-keys {
 
 		key-volume-up {
 			label = "Volume Up";
-			gpios = <&pm6125_gpios 6 GPIO_ACTIVE_LOW>;
+			gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
 			debounce-interval = <15>;
 			linux,can-disable;
@@ -96,9 +96,9 @@ key-volume-up {
 
 &pm6125_gpios {
 	vol_up_n: vol-up-n-state {
-		pins = "gpio6";
+		pins = "gpio5";
 		function = "normal";
-		power-source = <1>;
+		power-source = <0>;
 		bias-pull-up;
 		input-enable;
 	};

-- 
2.52.0