From: Kendall Willis <k-willis@ti.com>
To: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
"Tero Kristo" <kristo@kernel.org>, Rob Herring <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, <d-gole@ti.com>,
<msp@baylibre.com>
Cc: <vishalm@ti.com>, <sebin.francis@ti.com>, <khilman@baylibre.com>,
<a-kaur@ti.com>, <s-kochidanadu@ti.com>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Kendall Willis <k-willis@ti.com>
Subject: [PATCH v4 2/4] arm64: dts: ti: k3-am62a7-sk: Enable Main UART wakeup
Date: Thu, 22 Jan 2026 11:38:32 -0600 [thread overview]
Message-ID: <20260122-b4-uart-daisy-chain-dts-v4-2-cfdabdf5e6c1@ti.com> (raw)
In-Reply-To: <20260122-b4-uart-daisy-chain-dts-v4-0-cfdabdf5e6c1@ti.com>
The Main UART can resume from suspend to RAM states when PIN_WKUP_EN
is enabled. Add the necessary pins needed to wakeup the system. Add the
system idle states that the Main UART can wakeup the system from.
The UART driver uses the "default" pinctrl state when the system is
active. In the suspend hook, if the UART is wakeup enabled, the "wakeup"
pinctrl state is selected by the UART driver in order to allow wakeup.
Upon resume, the default pinctrl state is selected again.
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Kendall Willis <k-willis@ti.com>
---
arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index e99bdbc2e0cbdf858f1631096f9c2a086191bab3..112f0f2a3d449b324d479c0e2a7d07d0ee57caf6 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -282,6 +282,13 @@ AM62AX_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (D15) UART0_TXD */
bootph-all;
};
+ main_uart0_pins_wakeup: main-uart0-wakeup-pins {
+ pinctrl-single,pins = <
+ AM62AX_IOPAD(0x1c8, PIN_INPUT | PIN_WKUP_EN, 0) /* (E14) UART0_RXD */
+ AM62AX_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (D15) UART0_TXD */
+ >;
+ };
+
main_uart1_pins_default: main-uart1-default-pins {
pinctrl-single,pins = <
AM62AX_IOPAD(0x01ac, PIN_INPUT, 2) /* (B21) MCASP0_AFSR.UART1_RXD */
@@ -717,8 +724,12 @@ &main_gpio_intr {
&main_uart0 {
status = "okay";
- pinctrl-names = "default";
+ pinctrl-names = "default", "wakeup";
pinctrl-0 = <&main_uart0_pins_default>;
+ pinctrl-1 = <&main_uart0_pins_wakeup>;
+ wakeup-source = <&system_deep_sleep>,
+ <&system_mcu_only>,
+ <&system_standby>;
bootph-all;
};
--
2.34.1
next prev parent reply other threads:[~2026-01-22 17:38 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-22 17:38 [PATCH v4 0/4] arm64: dts: ti: k3-am62: Support " Kendall Willis
2026-01-22 17:38 ` [PATCH v4 1/4] arm64: dts: ti: k3-am62x-sk-common: Enable " Kendall Willis
2026-01-22 17:38 ` Kendall Willis [this message]
2026-01-22 17:38 ` [PATCH v4 3/4] arm64: dts: ti: k3-am62p5-sk: " Kendall Willis
2026-01-22 17:38 ` [PATCH v4 4/4] arm64: dts: ti: k3-am62l3-evm: " Kendall Willis
2026-01-27 20:14 ` [PATCH v4 0/4] arm64: dts: ti: k3-am62: Support " Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260122-b4-uart-daisy-chain-dts-v4-2-cfdabdf5e6c1@ti.com \
--to=k-willis@ti.com \
--cc=a-kaur@ti.com \
--cc=conor+dt@kernel.org \
--cc=d-gole@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=khilman@baylibre.com \
--cc=kristo@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=msp@baylibre.com \
--cc=nm@ti.com \
--cc=robh@kernel.org \
--cc=s-kochidanadu@ti.com \
--cc=sebin.francis@ti.com \
--cc=vigneshr@ti.com \
--cc=vishalm@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®