From: Raag Jadav <raag.jadav@intel.com>
To: andriy.shevchenko@linux.intel.com,
mika.westerberg@linux.intel.com, linusw@kernel.org
Cc: linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
Raag Jadav <raag.jadav@intel.com>,
stable@vger.kernel.org,
Guido Trentalancia <guido@trentalancia.com>
Subject: [PATCH v2] pinctrl: intel: Add code name documentation
Date: Sat, 24 Jan 2026 13:44:54 +0530 [thread overview]
Message-ID: <20260124081708.1141884-1-raag.jadav@intel.com> (raw)
Intel pinctrl drivers support large set of platforms and the IPs are
often reused by their different variants, but it's currently not possible
to figure out the exact driver that supports specific variant. Add user
friendly documentation for them.
Cc: stable@vger.kernel.org
Reported-by: Guido Trentalancia <guido@trentalancia.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220056
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Guido Trentalancia <guido@trentalancia.com>
---
v2: Also document for other similar drivers (Andy)
drivers/pinctrl/intel/Kconfig | 21 +++++++++++++++------
1 file changed, 15 insertions(+), 6 deletions(-)
diff --git a/drivers/pinctrl/intel/Kconfig b/drivers/pinctrl/intel/Kconfig
index e4dc9ba899bd..488344f53d45 100644
--- a/drivers/pinctrl/intel/Kconfig
+++ b/drivers/pinctrl/intel/Kconfig
@@ -53,7 +53,10 @@ config PINCTRL_ALDERLAKE
select PINCTRL_INTEL
help
This pinctrl driver provides an interface that allows configuring
- of Intel Alder Lake PCH pins and using them as GPIOs.
+ PCH pins of the following platforms and using them as GPIOs:
+ - Alder Lake HX, N and S
+ - Raptor Lake HX, E and S
+ - Twin Lake
config PINCTRL_BROXTON
tristate "Intel Broxton pinctrl and GPIO driver"
@@ -137,15 +140,17 @@ config PINCTRL_METEORLAKE
select PINCTRL_INTEL
help
This pinctrl driver provides an interface that allows configuring
- of Intel Meteor Lake pins and using them as GPIOs.
+ SoC pins of the following platforms and using them as GPIOs:
+ - Arrow Lake (all variants)
+ - Meteor Lake (all variants)
config PINCTRL_METEORPOINT
tristate "Intel Meteor Point pinctrl and GPIO driver"
select PINCTRL_INTEL
help
- Meteor Point is the PCH of Intel Meteor Lake. This pinctrl driver
- provides an interface that allows configuring of PCH pins and
- using them as GPIOs.
+ This pinctrl driver provides an interface that allows configuring
+ PCH pins of the following platforms and using them as GPIOs:
+ - Arrow Lake HX and S
config PINCTRL_SUNRISEPOINT
tristate "Intel Sunrisepoint pinctrl and GPIO driver"
@@ -160,7 +165,11 @@ config PINCTRL_TIGERLAKE
select PINCTRL_INTEL
help
This pinctrl driver provides an interface that allows configuring
- of Intel Tiger Lake PCH pins and using them as GPIOs.
+ PCH pins of the following platforms and using them as GPIOs:
+ - Alder Lake H, P, PS and U
+ - Raptor Lake H, P, PS, PX and U
+ - Rocket Lake S
+ - Tiger Lake (all variants)
source "drivers/pinctrl/intel/Kconfig.tng"
endmenu
--
2.43.0
next reply other threads:[~2026-01-24 8:19 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-24 8:14 Raag Jadav [this message]
2026-01-24 9:52 ` Andy Shevchenko
2026-01-24 12:36 ` Guido Trentalancia
2026-01-26 16:37 ` Raag Jadav
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260124081708.1141884-1-raag.jadav@intel.com \
--to=raag.jadav@intel.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=guido@trentalancia.com \
--cc=linusw@kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mika.westerberg@linux.intel.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®