From: "Niklas Söderlund" <niklas.soderlund@ragnatech.se>
To: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <magnus.damm@gmail.com>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>,
linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
linux-kernel@vger.kernel.org,
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Subject: Re: [PATCH 5/5] media: rcar-csi2: Optimize rcsi2_calc_mbps()
Date: Sat, 24 Jan 2026 20:49:05 +0100 [thread overview]
Message-ID: <20260124194905.GB3395783@ragnatech.se> (raw)
In-Reply-To: <20260115-rcar-streams-prep-1-v1-5-f87700926c11@ideasonboard.com>
Hello Tomi,
Thanks for your patch.
On 2026-01-15 12:07:01 +0200, Tomi Valkeinen wrote:
> With modern drivers supporting link-freq, we don't need to do any
> calculations based on the bpp and number of lanes when figuring out the
> link frequency. However, the code currently always runs code to get the
> bpp and number of lanes.
>
> Optimize the rcsi2_calc_mbps() so that we only do that when needed, i.e.
> when querying the link-freq is not supported by the upstream subdevice.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> ---
> drivers/media/platform/renesas/rcar-csi2.c | 50 +++++++++++++++++-------------
> 1 file changed, 29 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/media/platform/renesas/rcar-csi2.c b/drivers/media/platform/renesas/rcar-csi2.c
> index a2a87c5bfd7c..7305cc4a04cb 100644
> --- a/drivers/media/platform/renesas/rcar-csi2.c
> +++ b/drivers/media/platform/renesas/rcar-csi2.c
> @@ -1006,15 +1006,10 @@ static int rcsi2_get_active_lanes(struct rcar_csi2 *priv,
> static int rcsi2_calc_mbps(struct rcar_csi2 *priv,
> struct v4l2_subdev_state *state)
> {
> - const struct rcar_csi2_format *format;
> - struct v4l2_mbus_framefmt *fmt;
> struct media_pad *remote_pad;
> struct v4l2_subdev *source;
> - unsigned int lanes;
> - unsigned int bpp;
> s64 freq;
> u64 mbps;
> - int ret;
>
> if (!priv->remote)
> return -ENODEV;
> @@ -1022,28 +1017,41 @@ static int rcsi2_calc_mbps(struct rcar_csi2 *priv,
> source = priv->remote;
> remote_pad = &source->entity.pads[priv->remote_pad];
>
> - ret = rcsi2_get_active_lanes(priv, &lanes);
> - if (ret)
> - return ret;
> + /*
> + * First try to get the real link freq. If that fails, try the heuristic
> + * method with bpp and lanes (but that only works for one route).
> + */
> + freq = v4l2_get_link_freq(remote_pad, 0, 0);
> + if (freq < 0) {
> + const struct rcar_csi2_format *format;
> + const struct v4l2_mbus_framefmt *fmt;
> + unsigned int lanes;
> + unsigned int bpp;
> + int ret;
>
> - fmt = v4l2_subdev_state_get_format(state, RCAR_CSI2_SINK);
> - if (!fmt)
> - return -EINVAL;
> + ret = rcsi2_get_active_lanes(priv, &lanes);
> + if (ret)
> + return ret;
>
> - format = rcsi2_code_to_fmt(fmt->code);
> - if (!format)
> - return -EINVAL;
> + fmt = v4l2_subdev_state_get_format(state, RCAR_CSI2_SINK);
> + if (!fmt)
> + return -EINVAL;
>
> - bpp = format->bpp;
> + format = rcsi2_code_to_fmt(fmt->code);
> + if (!format)
> + return -EINVAL;
>
> - freq = v4l2_get_link_freq(remote_pad, bpp, 2 * lanes);
> - if (freq < 0) {
> - int ret = (int)freq;
> + bpp = format->bpp;
>
> - dev_err(priv->dev, "failed to get link freq for %s: %d\n",
> - source->name, ret);
> + freq = v4l2_get_link_freq(remote_pad, bpp, 2 * lanes);
> + if (freq < 0) {
> + int ret = (int)freq;
>
> - return ret;
> + dev_err(priv->dev, "failed to get link freq for %s: %d\n",
> + source->name, ret);
> +
> + return ret;
> + }
> }
>
> mbps = div_u64(freq * 2, MEGA);
>
> --
> 2.43.0
>
--
Kind Regards,
Niklas Söderlund
next prev parent reply other threads:[~2026-01-24 19:49 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-15 10:06 [PATCH 0/5] media: rcar: Streams support preparation Tomi Valkeinen
2026-01-15 10:06 ` [PATCH 1/5] media: rcar-isp: Improve ISPPROCMODE_DT_PROC_MODE_VC Tomi Valkeinen
2026-01-15 10:06 ` [PATCH 2/5] media: rcar-csi2: Improve FLD_FLD_EN macros Tomi Valkeinen
2026-01-24 19:48 ` Niklas Söderlund
2026-01-15 10:06 ` [PATCH 3/5] media: rcar-csi2: Move rcsi2_calc_mbps() Tomi Valkeinen
2026-01-15 10:07 ` [PATCH 4/5] media: rcar-csi2: Simplify rcsi2_calc_mbps() Tomi Valkeinen
2026-01-15 10:07 ` [PATCH 5/5] media: rcar-csi2: Optimize rcsi2_calc_mbps() Tomi Valkeinen
2026-01-24 19:49 ` Niklas Söderlund [this message]
2026-01-24 19:51 ` [PATCH 0/5] media: rcar: Streams support preparation Niklas Söderlund
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260124194905.GB3395783@ragnatech.se \
--to=niklas.soderlund@ragnatech.se \
--cc=geert+renesas@glider.be \
--cc=kieran.bingham+renesas@ideasonboard.com \
--cc=laurent.pinchart+renesas@ideasonboard.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=mchehab@kernel.org \
--cc=tomi.valkeinen+renesas@ideasonboard.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®