[PATCH] pinctrl: lpass-lpi: implement .get_direction() for the GPIO driver

[Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>]

GPIO controller driver should typically implement the .get_direction()
callback as GPIOLIB internals may try to use it to determine the state
of a pin. Add it for the LPASS LPI driver.

Reported-by: Abel Vesa <abelvesa@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 6e261d1090d6 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
---
 drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
index 78212f992843..76aed3296279 100644
--- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
+++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
@@ -312,6 +312,22 @@ static const struct pinconf_ops lpi_gpio_pinconf_ops = {
 	.pin_config_group_set		= lpi_config_set,
 };
 
+static int lpi_gpio_get_direction(struct gpio_chip *chip, unsigned int pin)
+{
+	unsigned long config = pinconf_to_config_packed(PIN_CONFIG_LEVEL, 0);
+	struct lpi_pinctrl *state = gpiochip_get_data(chip);
+	unsigned long arg;
+	int ret;
+
+	ret = lpi_config_get(state->ctrl, pin, &config);
+	if (ret)
+		return ret;
+
+	arg = pinconf_to_config_argument(config);
+
+	return arg ? GPIO_LINE_DIRECTION_OUT : GPIO_LINE_DIRECTION_IN;
+}
+
 static int lpi_gpio_direction_input(struct gpio_chip *chip, unsigned int pin)
 {
 	struct lpi_pinctrl *state = gpiochip_get_data(chip);
@@ -409,6 +425,7 @@ static void lpi_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 #endif
 
 static const struct gpio_chip lpi_gpio_template = {
+	.get_direction		= lpi_gpio_get_direction,
 	.direction_input	= lpi_gpio_direction_input,
 	.direction_output	= lpi_gpio_direction_output,
 	.get			= lpi_gpio_get,
-- 
2.47.3