mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
To: Mathias Nyman <mathias.nyman@intel.com>,
	 Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	 Thierry Reding <thierry.reding@gmail.com>,
	 Jonathan Hunter <jonathanh@nvidia.com>,
	JC Kuo <jckuo@nvidia.com>,  Vinod Koul <vkoul@kernel.org>,
	Kishon Vijay Abraham I <kishon@kernel.org>,
	 Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	 Neil Armstrong <neil.armstrong@linaro.org>
Cc: linux-usb@vger.kernel.org, linux-tegra@vger.kernel.org,
	 linux-kernel@vger.kernel.org, linux-phy@lists.infradead.org,
	 devicetree@vger.kernel.org,
	Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Subject: [PATCH v2 5/6] phy: tegra: xusb: Move .set_mode() to a shared location
Date: Tue, 27 Jan 2026 15:11:51 +0000	[thread overview]
Message-ID: <20260127-diogo-tegra_phy-v2-5-787b9eed3ed5@tecnico.ulisboa.pt> (raw)
In-Reply-To: <20260127-diogo-tegra_phy-v2-0-787b9eed3ed5@tecnico.ulisboa.pt>

As both Tegra210 and Tegra186 can have a common XUSB .set_mode()
implementation move it to a location where it can be used by both
platforms. Move Tegra210 to this common implementation.

While at it fix a typo in a comment.

Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
---
v1->v2:
- New patch
---
 drivers/phy/tegra/xusb-tegra210.c | 43 +--------------------------------------
 drivers/phy/tegra/xusb.c          | 40 ++++++++++++++++++++++++++++++++++++
 drivers/phy/tegra/xusb.h          |  2 ++
 3 files changed, 43 insertions(+), 42 deletions(-)

diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c
index be03a17afd7e..14e24296641b 100644
--- a/drivers/phy/tegra/xusb-tegra210.c
+++ b/drivers/phy/tegra/xusb-tegra210.c
@@ -1910,47 +1910,6 @@ static int tegra210_xusb_padctl_id_override(struct tegra_xusb_padctl *padctl,
 	return 0;
 }
 
-static int tegra210_usb2_phy_set_mode(struct phy *phy, enum phy_mode mode,
-				      int submode)
-{
-	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
-	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
-	struct tegra_xusb_usb2_port *port = tegra_xusb_find_usb2_port(padctl,
-								lane->index);
-	int err = 0;
-
-	mutex_lock(&padctl->lock);
-
-	dev_dbg(&port->base.dev, "%s: mode %d", __func__, mode);
-
-	if (mode == PHY_MODE_USB_OTG) {
-		if (submode == USB_ROLE_HOST) {
-			tegra210_xusb_padctl_id_override(padctl, true);
-
-			err = regulator_enable(port->supply);
-		} else if (submode == USB_ROLE_DEVICE) {
-			tegra210_xusb_padctl_vbus_override(padctl, true);
-		} else if (submode == USB_ROLE_NONE) {
-			/*
-			 * When port is peripheral only or role transitions to
-			 * USB_ROLE_NONE from USB_ROLE_DEVICE, regulator is not
-			 * be enabled.
-			 */
-			if (port->role == USB_ROLE_HOST)
-				regulator_disable(port->supply);
-
-			tegra210_xusb_padctl_id_override(padctl, false);
-			tegra210_xusb_padctl_vbus_override(padctl, false);
-		}
-
-		port->role = submode;
-	}
-
-	mutex_unlock(&padctl->lock);
-
-	return err;
-}
-
 static int tegra210_usb2_phy_power_on(struct phy *phy)
 {
 	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
@@ -2174,7 +2133,7 @@ static const struct phy_ops tegra210_usb2_phy_ops = {
 	.exit = tegra210_usb2_phy_exit,
 	.power_on = tegra210_usb2_phy_power_on,
 	.power_off = tegra210_usb2_phy_power_off,
-	.set_mode = tegra210_usb2_phy_set_mode,
+	.set_mode = tegra_xusb_usb2_phy_set_mode,
 	.owner = THIS_MODULE,
 };
 
diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c
index 0443465bcf50..2327275740f8 100644
--- a/drivers/phy/tegra/xusb.c
+++ b/drivers/phy/tegra/xusb.c
@@ -770,6 +770,46 @@ bool tegra_xusb_usb2_port_wait_role_none(struct tegra_xusb_padctl *padctl, int i
 }
 EXPORT_SYMBOL_GPL(tegra_xusb_usb2_port_wait_role_none);
 
+int tegra_xusb_usb2_phy_set_mode(struct phy *phy, enum phy_mode mode, int submode)
+{
+	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+	struct tegra_xusb_usb2_port *port = tegra_xusb_find_usb2_port(padctl,
+								lane->index);
+	int err = 0;
+
+	mutex_lock(&padctl->lock);
+
+	dev_dbg(&port->base.dev, "%s: mode %d", __func__, mode);
+
+	if (mode == PHY_MODE_USB_OTG) {
+		if (submode == USB_ROLE_HOST) {
+			tegra_xusb_padctl_set_id_override(padctl, true);
+
+			err = regulator_enable(port->supply);
+		} else if (submode == USB_ROLE_DEVICE) {
+			tegra_xusb_padctl_set_vbus_override(padctl, true);
+		} else if (submode == USB_ROLE_NONE) {
+			/*
+			 * When port is peripheral only or role transitions to
+			 * USB_ROLE_NONE from USB_ROLE_DEVICE, regulator is not
+			 * enabled.
+			 */
+			if (port->role == USB_ROLE_HOST)
+				regulator_disable(port->supply);
+
+			tegra_xusb_padctl_set_id_override(padctl, false);
+			tegra_xusb_padctl_set_vbus_override(padctl, false);
+		}
+
+		port->role = submode;
+	}
+
+	mutex_unlock(&padctl->lock);
+
+	return err;
+}
+
 static int tegra_xusb_usb2_port_parse_dt(struct tegra_xusb_usb2_port *usb2)
 {
 	struct tegra_xusb_port *port = &usb2->base;
diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h
index 08053a730d54..36cc87ae757e 100644
--- a/drivers/phy/tegra/xusb.h
+++ b/drivers/phy/tegra/xusb.h
@@ -501,6 +501,8 @@ struct tegra_xusb_lane *tegra_xusb_find_lane(struct tegra_xusb_padctl *padctl,
 					     const char *name,
 					     unsigned int index);
 
+int tegra_xusb_usb2_phy_set_mode(struct phy *phy, enum phy_mode mode, int submode);
+
 #if defined(CONFIG_ARCH_TEGRA_124_SOC) || defined(CONFIG_ARCH_TEGRA_132_SOC)
 extern const struct tegra_xusb_padctl_soc tegra124_xusb_padctl_soc;
 #endif

-- 
2.52.0


  parent reply	other threads:[~2026-01-27 15:20 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-01-27 15:11 [PATCH v2 0/6] Fixes to Tegra USB role switching and phy handling Diogo Ivo
2026-01-27 15:11 ` [PATCH v2 1/6] phy: tegra: xusb: Fix USB2 port regulator disable logic Diogo Ivo
2026-01-27 15:11 ` [PATCH v2 2/6] usb: xhci: tegra: Remove redundant mutex when setting phy mode Diogo Ivo
2026-03-24 11:48   ` Thierry Reding
2026-03-24 12:28     ` Diogo Ivo
2026-03-26 14:17     ` Diogo Ivo
2026-03-27 14:06       ` Thierry Reding
2026-01-27 15:11 ` [PATCH v2 3/6] phy: tegra: xusb: Fix ordering issue when switching roles on USB2 ports Diogo Ivo
2026-01-27 15:11 ` [PATCH v2 4/6] phy: tegra: xusb: Add ID override support to padctl Diogo Ivo
2026-01-27 15:11 ` Diogo Ivo [this message]
2026-01-27 15:11 ` [PATCH v2 6/6] phy: tegra: xusb: Move T186 .set_mode() to common implementation Diogo Ivo
2026-03-24 10:16   ` Jon Hunter
2026-03-24 11:31     ` Diogo Ivo
2026-03-24 13:33       ` Jon Hunter
2026-03-24 14:36         ` Diogo Ivo
2026-03-27 17:46           ` Jon Hunter
2026-03-02  9:10 ` [PATCH v2 0/6] Fixes to Tegra USB role switching and phy handling Diogo Ivo
2026-03-02  9:59 ` Vinod Koul
2026-03-23 16:15 ` Diogo Ivo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260127-diogo-tegra_phy-v2-5-787b9eed3ed5@tecnico.ulisboa.pt \
    --to=diogo.ivo@tecnico.ulisboa.pt \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jckuo@nvidia.com \
    --cc=jonathanh@nvidia.com \
    --cc=kishon@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mathias.nyman@intel.com \
    --cc=neil.armstrong@linaro.org \
    --cc=robh@kernel.org \
    --cc=thierry.reding@gmail.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox