From: Abel Vesa <abel.vesa@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>,
Linus Walleij <linusw@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, linux-gpio@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Abel Vesa <abel.vesa@oss.qualcomm.com>
Subject: [PATCH v2 1/2] dt-bindings: pinctrl: document the Eliza Top Level Mode Multiplexer
Date: Tue, 27 Jan 2026 17:47:36 +0200 [thread overview]
Message-ID: <20260127-eliza-pinctrl-v2-1-1faf78efdc2e@oss.qualcomm.com> (raw)
In-Reply-To: <20260127-eliza-pinctrl-v2-0-1faf78efdc2e@oss.qualcomm.com>
Document the Top Level Mode Multiplexer on the Eliza Platform.
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
---
.../bindings/pinctrl/qcom,eliza-tlmm.yaml | 138 +++++++++++++++++++++
1 file changed, 138 insertions(+)
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,eliza-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,eliza-tlmm.yaml
new file mode 100644
index 000000000000..d8b6591caf57
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,eliza-tlmm.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,eliza-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. Eliza TLMM block
+
+maintainers:
+ - Abel Vesa <abel.vesa@oss.qualcomm.com>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm Eliza SoC.
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,eliza-tlmm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 84
+
+ gpio-line-names:
+ maxItems: 185
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-eliza-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-eliza-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-eliza-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9]|18[0-5])$"
+ - enum: [ ufs_reset ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+ enum: [ gpio, aoss_cti, atest_char, atest_usb, audio_ext_mclk0,
+ audio_ref_clk, cam_mclk, cci_async_in, cci_i2c_scl,
+ cci_i2c_sda, cci_timer, coex_uart1_rx, coex_uart1_tx,
+ coex_uart2_rx, coex_uart2_tx, dbg_out_clk,
+ ddr_bist_complete, ddr_bist_fail, ddr_bist_start,
+ ddr_bist_stop, ddr_pxi0, ddr_pxi1, dp0_hot, egpio,
+ gcc_gp1, gcc_gp2, gcc_gp3, gnss_adc0, gnss_adc1,
+ hdmi_ddc_scl, hdmi_ddc_sda, hdmi_dtest0, hdmi_dtest1,
+ hdmi_hot_plug, hdmi_pixel_clk, hdmi_rcv_det, hdmi_tx_cec,
+ host2wlan_sol, i2s0_data0, i2s0_data1, i2s0_sck, i2s0_ws,
+ ibi_i3c, jitter_bist, mdp_esync0_out, mdp_esync1_out,
+ mdp_vsync, mdp_vsync0_out, mdp_vsync11_out,
+ mdp_vsync1_out, mdp_vsync2_out, mdp_vsync3_out,
+ mdp_vsync_e, nav_gpio0, nav_gpio1, nav_gpio2, nav_gpio3,
+ pcie0_clk_req_n, pcie1_clk_req_n, phase_flag,
+ pll_bist_sync, pll_clk_aux, prng_rosc0, prng_rosc1,
+ prng_rosc2, prng_rosc3, qdss_cti, qdss_gpio_traceclk,
+ qdss_gpio_tracectl, qdss_gpio_tracedata, qlink_big_enable,
+ qlink_big_request, qlink_little_enable,
+ qlink_little_request, qlink_wmss, qspi0, qspi_clk,
+ qspi_cs, qup1_se0, qup1_se1, qup1_se2, qup1_se3, qup1_se4,
+ qup1_se5, qup1_se6, qup1_se7, qup2_se0, qup2_se1,
+ qup2_se2, qup2_se3, qup2_se4, qup2_se5, qup2_se6,
+ qup2_se7, resout_gpio, sd_write_protect, sdc1, sdc2,
+ sdc2_fb_clk, tb_trig_sdc1, tb_trig_sdc2, tmess_prng0,
+ tmess_prng1, tmess_prng2, tmess_prng3, tsense_pwm1,
+ tsense_pwm2, tsense_pwm3, tsense_pwm4, uim0_clk,
+ uim0_data, uim0_present, uim0_reset, uim1_clk, uim1_data,
+ uim1_present, uim1_reset, usb0_hs, usb_phy, vfr_0, vfr_1,
+ vsense_trigger_mirnat, wcn_sw_ctrl ]
+ required:
+ - pins
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ tlmm: pinctrl@f100000 {
+ compatible = "qcom,eliza-tlmm";
+ reg = <0x0f100000 0x300000>;
+
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ gpio-ranges = <&tlmm 0 0 186>;
+
+ gpio-wo-state {
+ pins = "gpio1";
+ function = "gpio";
+ };
+
+ qup-uart14-default-state {
+ pins = "gpio18", "gpio19";
+ function = "qup2_se5";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+...
--
2.48.1
next prev parent reply other threads:[~2026-01-27 15:47 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-27 15:47 [PATCH v2 0/2] pinctrl: qcom: Add support for Qualcomm Eliza SoC Abel Vesa
2026-01-27 15:47 ` Abel Vesa [this message]
2026-01-28 11:38 ` [PATCH v2 1/2] dt-bindings: pinctrl: document the Eliza Top Level Mode Multiplexer Krzysztof Kozlowski
2026-01-28 17:22 ` Abel Vesa
2026-01-28 19:58 ` Krzysztof Kozlowski
2026-01-29 8:44 ` Abel Vesa
2026-01-29 10:34 ` Konrad Dybcio
2026-01-29 10:41 ` Abel Vesa
2026-01-29 10:45 ` Konrad Dybcio
2026-01-29 10:57 ` Abel Vesa
2026-01-29 11:12 ` Abel Vesa
2026-01-29 12:04 ` Konrad Dybcio
2026-01-29 12:42 ` Abel Vesa
2026-01-29 14:11 ` Konrad Dybcio
2026-01-30 8:18 ` Abel Vesa
2026-01-29 10:54 ` Abel Vesa
2026-01-29 10:59 ` Abel Vesa
2026-02-08 10:04 ` Krzysztof Kozlowski
2026-02-16 12:57 ` Abel Vesa
2026-01-27 15:47 ` [PATCH v2 2/2] pinctrl: qcom: Add Eliza pinctrl driver Abel Vesa
2026-01-27 19:13 ` [PATCH v2 0/2] pinctrl: qcom: Add support for Qualcomm Eliza SoC Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260127-eliza-pinctrl-v2-1-1faf78efdc2e@oss.qualcomm.com \
--to=abel.vesa@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linusw@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®