[PATCH] usb: xhci: add xhci_halt() for HCE Handling

[jiangdayu <jiangdayu@xiaomi.com>]

When the xHCI controller reports a Host Controller Error (HCE) status
in the interrupt handler, the driver currently only logs a warning and
continues execution. However, a Host Controller Error indicates a
critical hardware failure that requires the controller to be halted.

Add xhci_halt(xhci) call after the HCE warning to properly halt the
controller when this error condition is detected. This ensures the
controller is in a consistent state and prevents further operations
on a failed hardware. Additionally, if there are still unhandled
interrupts at this point, it may cause interrupt storm.

The change is made in xhci_irq() function where STS_HCE status is
checked, mirroring the existing error handling pattern used for
STS_FATAL errors.

Fixes: 2a25e66d676df ("xhci: print warning when HCE was set")
Signed-off-by: jiangdayu <jiangdayu@xiaomi.com>
---
 drivers/usb/host/xhci-ring.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 9315ba18310d..1cbefee3c4ca 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -3195,6 +3195,7 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd)
 
 	if (status & STS_HCE) {
 		xhci_warn(xhci, "WARNING: Host Controller Error\n");
+		xhci_halt(xhci);
 		goto out;
 	}
 
-- 
2.34.1