From: kernel test robot <lkp@intel.com>
To: "Rob Herring (Arm)" <robh@kernel.org>
Cc: oe-kbuild-all@lists.linux.dev, linux-kernel@vger.kernel.org,
Miquel Raynal <miquel.raynal@bootlin.com>
Subject: arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dtb: pinctrl (marvell,armada-8k-cpm-pinctrl): 'copper-eth-phy-reset' does not match any of the regexes: '-pins(-.+)?$', '^pinctrl-[0-9]+$'
Date: Tue, 27 Jan 2026 16:49:22 +0100 [thread overview]
Message-ID: <202601271652.Y6rFJKJK-lkp@intel.com> (raw)
tree: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
head: fcb70a56f4d81450114034b2c61f48ce7444a0e2
commit: 45a8d350e72cc98e91bce2c20d4f26a8d9ccfffa dt-bindings: arm: Convert Marvell CP110 System Controller to DT schema
date: 2 months ago
config: arm64-randconfig-2051-20260126 (https://download.01.org/0day-ci/archive/20260127/202601271652.Y6rFJKJK-lkp@intel.com/config)
compiler: aarch64-linux-gcc (GCC) 8.5.0
dtschema version: 2025.13.dev4+g85cec3155
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20260127/202601271652.Y6rFJKJK-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202601271652.Y6rFJKJK-lkp@intel.com/
dtcheck warnings: (new ones prefixed by >>)
arch/arm64/boot/dts/marvell/armada-cp11x.dtsi:257.24-276.6: Warning (unit_address_vs_reg): /cp1-bus/bus@f4000000/system-controller@440000/gpio@140: node has a unit name, but no reg or ranges property
arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dtb: system-controller@6f4000 (syscon): compatible: ['syscon', 'simple-mfd'] is too short
from schema $id: http://devicetree.org/schemas/mfd/syscon-common.yaml
arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dtb: /soc/bus@f0000000/system-controller@6f4000/pinctrl: failed to match any schema with compatible: ['marvell,ap806-pinctrl']
arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dtb: /soc/bus@f0000000/system-controller@6f4000/clock: failed to match any schema with compatible: ['marvell,ap806-clock']
arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dtb: system-controller@6f8000 (syscon): compatible: ['syscon', 'simple-mfd'] is too short
from schema $id: http://devicetree.org/schemas/mfd/syscon-common.yaml
arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dtb: /soc/bus@f0000000/system-controller@6f8000/clock-cpu@278: failed to match any schema with compatible: ['marvell,ap806-cpu-clock']
arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dtb: system-controller@440000 (syscon): compatible: ['syscon', 'simple-mfd'] is too short
from schema $id: http://devicetree.org/schemas/mfd/syscon-common.yaml
>> arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dtb: pinctrl (marvell,armada-8k-cpm-pinctrl): 'copper-eth-phy-reset' does not match any of the regexes: '-pins(-.+)?$', '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/pinctrl/marvell,armada-7k-pinctrl.yaml
arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dtb: system-controller@400000 (syscon): compatible: ['syscon', 'simple-mfd'] is too short
from schema $id: http://devicetree.org/schemas/mfd/syscon-common.yaml
arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dtb: usb@510000 (marvell,armada-8k-xhci): Unevaluated properties are not allowed ('iommus' was unexpected)
from schema $id: http://devicetree.org/schemas/usb/generic-xhci.yaml
arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dtb: connector (usb-a-connector): Unevaluated properties are not allowed ('phy-supply' was unexpected)
from schema $id: http://devicetree.org/schemas/connector/usb-connector.yaml
arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dtb: system-controller@440000 (syscon): compatible: ['syscon', 'simple-mfd'] is too short
from schema $id: http://devicetree.org/schemas/mfd/syscon-common.yaml
arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dtb: pinctrl (marvell,armada-8k-cps-pinctrl): 'nand-rb' does not match any of the regexes: '-pins(-.+)?$', '^pinctrl-[0-9]+$'
--
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: system-controller@6f4000 (syscon): compatible: ['syscon', 'simple-mfd'] is too short
from schema $id: http://devicetree.org/schemas/mfd/syscon-common.yaml
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /soc/bus@f0000000/system-controller@6f4000/pinctrl: failed to match any schema with compatible: ['marvell,ap806-pinctrl']
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /soc/bus@f0000000/system-controller@6f4000/clock: failed to match any schema with compatible: ['marvell,ap807-clock']
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: system-controller@6f8000 (syscon): compatible: ['syscon', 'simple-mfd'] is too short
from schema $id: http://devicetree.org/schemas/mfd/syscon-common.yaml
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: /soc/bus@f0000000/system-controller@6f8000/clock-cpu: failed to match any schema with compatible: ['marvell,ap807-cpu-clock']
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: system-controller@440000 (syscon): compatible: ['syscon', 'simple-mfd'] is too short
from schema $id: http://devicetree.org/schemas/mfd/syscon-common.yaml
>> arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: pinctrl (marvell,cp115-standalone-pinctrl): 'pintrl-names' does not match any of the regexes: '-pins(-.+)?$', '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/pinctrl/marvell,armada-7k-pinctrl.yaml
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: system-controller@400000 (syscon): compatible: ['syscon', 'simple-mfd'] is too short
from schema $id: http://devicetree.org/schemas/mfd/syscon-common.yaml
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: usb@500000 (marvell,armada-8k-xhci): Unevaluated properties are not allowed ('dr_mode', 'vbus-supply' were unexpected)
from schema $id: http://devicetree.org/schemas/usb/generic-xhci.yaml
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: usb@510000 (marvell,armada-8k-xhci): Unevaluated properties are not allowed ('dr_mode' was unexpected)
from schema $id: http://devicetree.org/schemas/usb/generic-xhci.yaml
arch/arm64/boot/dts/marvell/cn9130-cf-base.dtb: spi@700680 (marvell,armada-380-spi): Unevaluated properties are not allowed ('spi-max-frequency' was unexpected)
from schema $id: http://devicetree.org/schemas/spi/marvell,orion-spi.yaml
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
reply other threads:[~2026-01-27 15:49 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=202601271652.Y6rFJKJK-lkp@intel.com \
--to=lkp@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=miquel.raynal@bootlin.com \
--cc=oe-kbuild-all@lists.linux.dev \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®