Re: [PATCH v8 3/6] iio: proximity: rfd77402: Use kernel helper for result polling

[Jonathan Cameron <jic23@kernel.org>]

On Thu, 29 Jan 2026 00:23:01 +0200
Andy Shevchenko <andriy.shevchenko@intel.com> wrote:

> On Wed, Jan 28, 2026 at 11:21:50PM +0530, Shrikant Raskar via B4 Relay wrote:
> 
> > Replace the manually written polling loop with read_poll_timeout(),
> > the kernel's standard helper for waiting on hardware status.This
> > makes the code easier to read.
> > 
> > Move the polling logic into a dedicated helper function, as it will
> > be reused by future updates.  
> 
> ...
> 
> > -static int rfd77402_measure(struct i2c_client *client)
> > +static int rfd77402_wait_for_result(struct rfd77402_data *data)
> >  {
> > +	struct i2c_client *client = data->client;
> > +	int val, ret;  
> 
> 
> Where is the newly introduced comment?
I put it here whilst applying

J
> 
> > +	ret = read_poll_timeout(i2c_smbus_read_byte_data, val,
> > +				 (val < 0) || (val & RFD77402_ICSR_RESULT),
> > +				 10 * USEC_PER_MSEC,
> > +				 10 * 10 * USEC_PER_MSEC,
> > +				 false,
> > +				 client, RFD77402_ICSR);
> > +	if (val < 0)
> > +		return val;
> > +
> > +	return ret;
> > +}  
> 
> ...
> 
> > -		/*
> > -		 * As per RFD77402 datasheet section '3.1.1 Single Measure',
> > -		 * the suggested timeout value for single measure is 100ms.
> > -		 */  
> 
> ???
> 
> See above.
>