From: Lizhi Hou <lizhi.hou@amd.com>
To: <ogabbay@kernel.org>, <quic_jhugo@quicinc.com>,
<dri-devel@lists.freedesktop.org>,
<maciej.falkowski@linux.intel.com>
Cc: Lizhi Hou <lizhi.hou@amd.com>, <linux-kernel@vger.kernel.org>,
<max.zhen@amd.com>, <sonal.santan@amd.com>,
<mario.limonciello@amd.com>
Subject: [PATCH V1] accel/amdxdna: Remove hardware context status
Date: Mon, 2 Feb 2026 13:24:50 -0800 [thread overview]
Message-ID: <20260202212450.2681273-1-lizhi.hou@amd.com> (raw)
One newly supported command does not require hardware context configuration
to be performed upfront. As a result, checking hardware context status
causes this command to fail incorrectly.
Remove hardware context status handling entirely. For other commands,
if userspace submits a request without configuring the hardware context
first, the firmware will report an error or time out as appropriate.
Fixes: aac243092b70 ("accel/amdxdna: Add command execution")
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
---
drivers/accel/amdxdna/aie2_ctx.c | 25 ++-----------------------
drivers/accel/amdxdna/aie2_message.c | 3 +++
drivers/accel/amdxdna/amdxdna_ctx.h | 5 -----
3 files changed, 5 insertions(+), 28 deletions(-)
diff --git a/drivers/accel/amdxdna/aie2_ctx.c b/drivers/accel/amdxdna/aie2_ctx.c
index 208ac5b0579e..db0658fa03b9 100644
--- a/drivers/accel/amdxdna/aie2_ctx.c
+++ b/drivers/accel/amdxdna/aie2_ctx.c
@@ -56,17 +56,6 @@ static void aie2_job_put(struct amdxdna_sched_job *job)
kref_put(&job->refcnt, aie2_job_release);
}
-static void aie2_hwctx_status_shift_stop(struct amdxdna_hwctx *hwctx)
-{
- hwctx->old_status = hwctx->status;
- hwctx->status = HWCTX_STAT_STOP;
-}
-
-static void aie2_hwctx_status_restore(struct amdxdna_hwctx *hwctx)
-{
- hwctx->status = hwctx->old_status;
-}
-
/* The bad_job is used in aie2_sched_job_timedout, otherwise, set it to NULL */
static void aie2_hwctx_stop(struct amdxdna_dev *xdna, struct amdxdna_hwctx *hwctx,
struct drm_sched_job *bad_job)
@@ -93,11 +82,6 @@ static int aie2_hwctx_restart(struct amdxdna_dev *xdna, struct amdxdna_hwctx *hw
goto out;
}
- if (hwctx->status != HWCTX_STAT_READY) {
- XDNA_DBG(xdna, "hwctx is not ready, status %d", hwctx->status);
- goto out;
- }
-
ret = aie2_config_cu(hwctx, NULL);
if (ret) {
XDNA_ERR(xdna, "Config cu failed, ret %d", ret);
@@ -149,7 +133,6 @@ static int aie2_hwctx_suspend_cb(struct amdxdna_hwctx *hwctx, void *arg)
aie2_hwctx_wait_for_idle(hwctx);
aie2_hwctx_stop(xdna, hwctx, NULL);
- aie2_hwctx_status_shift_stop(hwctx);
return 0;
}
@@ -171,7 +154,6 @@ static int aie2_hwctx_resume_cb(struct amdxdna_hwctx *hwctx, void *arg)
{
struct amdxdna_dev *xdna = hwctx->client->xdna;
- aie2_hwctx_status_restore(hwctx);
return aie2_hwctx_restart(xdna, hwctx);
}
@@ -334,7 +316,7 @@ aie2_sched_job_run(struct drm_sched_job *sched_job)
struct dma_fence *fence;
int ret;
- if (hwctx->status != HWCTX_STAT_READY)
+ if (!hwctx->priv->mbox_chann)
return NULL;
if (!mmget_not_zero(job->mm))
@@ -716,7 +698,6 @@ int aie2_hwctx_init(struct amdxdna_hwctx *hwctx)
}
amdxdna_pm_suspend_put(xdna);
- hwctx->status = HWCTX_STAT_INIT;
init_waitqueue_head(&priv->job_free_wq);
XDNA_DBG(xdna, "hwctx %s init completed", hwctx->name);
@@ -760,7 +741,6 @@ void aie2_hwctx_fini(struct amdxdna_hwctx *hwctx)
/* Request fw to destroy hwctx and cancel the rest pending requests */
drm_sched_stop(&hwctx->priv->sched, NULL);
aie2_release_resource(hwctx);
- hwctx->status = HWCTX_STAT_STOP;
drm_sched_start(&hwctx->priv->sched, 0);
mutex_unlock(&xdna->dev_lock);
@@ -805,7 +785,7 @@ static int aie2_hwctx_cu_config(struct amdxdna_hwctx *hwctx, void *buf, u32 size
if (XDNA_MBZ_DBG(xdna, config->pad, sizeof(config->pad)))
return -EINVAL;
- if (hwctx->status != HWCTX_STAT_INIT) {
+ if (hwctx->cus) {
XDNA_ERR(xdna, "Not support re-config CU");
return -EINVAL;
}
@@ -836,7 +816,6 @@ static int aie2_hwctx_cu_config(struct amdxdna_hwctx *hwctx, void *buf, u32 size
}
wmb(); /* To avoid locking in command submit when check status */
- hwctx->status = HWCTX_STAT_READY;
return 0;
diff --git a/drivers/accel/amdxdna/aie2_message.c b/drivers/accel/amdxdna/aie2_message.c
index 578eaa7bf137..53e13858077b 100644
--- a/drivers/accel/amdxdna/aie2_message.c
+++ b/drivers/accel/amdxdna/aie2_message.c
@@ -493,6 +493,9 @@ int aie2_config_cu(struct amdxdna_hwctx *hwctx,
if (!chann)
return -ENODEV;
+ if (!hwctx->cus)
+ return 0;
+
if (hwctx->cus->num_cus > MAX_NUM_CUS) {
XDNA_DBG(xdna, "Exceed maximum CU %d", MAX_NUM_CUS);
return -EINVAL;
diff --git a/drivers/accel/amdxdna/amdxdna_ctx.h b/drivers/accel/amdxdna/amdxdna_ctx.h
index 4f641926a272..e90204edfb7d 100644
--- a/drivers/accel/amdxdna/amdxdna_ctx.h
+++ b/drivers/accel/amdxdna/amdxdna_ctx.h
@@ -107,11 +107,6 @@ struct amdxdna_hwctx {
u32 start_col;
u32 num_col;
u32 num_unused_col;
-#define HWCTX_STAT_INIT 0
-#define HWCTX_STAT_READY 1
-#define HWCTX_STAT_STOP 2
- u32 status;
- u32 old_status;
struct amdxdna_qos_info qos;
struct amdxdna_hwctx_param_config_cu *cus;
--
2.34.1
next reply other threads:[~2026-02-02 21:25 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-02 21:24 Lizhi Hou [this message]
2026-02-03 14:04 ` Mario Limonciello
2026-02-03 17:25 ` Lizhi Hou
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260202212450.2681273-1-lizhi.hou@amd.com \
--to=lizhi.hou@amd.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maciej.falkowski@linux.intel.com \
--cc=mario.limonciello@amd.com \
--cc=max.zhen@amd.com \
--cc=ogabbay@kernel.org \
--cc=quic_jhugo@quicinc.com \
--cc=sonal.santan@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®