From: James Hilliard <james.hilliard1@gmail.com>
To: linux-gpio@vger.kernel.org
Cc: James Hilliard <james.hilliard1@gmail.com>,
Linus Walleij <linusw@kernel.org>,
Bartosz Golaszewski <brgl@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Alexander Stein <linux@ew.tq-group.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 1/1] gpio: aggregator: add gpio-aggregator DT compatible
Date: Tue, 10 Feb 2026 21:42:12 -0700 [thread overview]
Message-ID: <20260211044216.2885718-1-james.hilliard1@gmail.com> (raw)
Add an OF match entry for gpio-aggregator so the forwarder can be
instantiated without using the delay-specific compatible.
Add a minimal DT schema for gpio-aggregator documenting compatible.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
---
.../bindings/gpio/gpio-aggregator.yaml | 57 +++++++++++++++++++
drivers/gpio/gpio-aggregator.c | 3 +
2 files changed, 60 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-aggregator.yaml
diff --git a/Documentation/devicetree/bindings/gpio/gpio-aggregator.yaml b/Documentation/devicetree/bindings/gpio/gpio-aggregator.yaml
new file mode 100644
index 000000000000..ec1d08f3db2c
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-aggregator.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-aggregator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO aggregator controller
+
+maintainers:
+ - Alexander Stein <linux@ew.tq-group.com>
+
+description: |
+ This binding describes a GPIO forwarder that exposes selected GPIO
+ lines as a virtual GPIO controller.
+
+properties:
+ compatible:
+ const: gpio-aggregator
+
+ "#gpio-cells":
+ description: Specifies the line offset and GPIO flags.
+ const: 2
+
+ gpios:
+ description: Array of GPIOs to aggregate
+ minItems: 1
+ maxItems: 32
+
+ gpio-controller: true
+
+ gpio-line-names:
+ minItems: 1
+ maxItems: 32
+
+required:
+ - compatible
+ - "#gpio-cells"
+ - gpio-controller
+ - gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ gpio_agg: gpio-aggregator {
+ compatible = "gpio-aggregator";
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>,
+ <&gpio3 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ consumer {
+ enable-gpios = <&gpio_agg 0 GPIO_ACTIVE_LOW>;
+ };
diff --git a/drivers/gpio/gpio-aggregator.c b/drivers/gpio/gpio-aggregator.c
index 416f265d09d0..a09752fc5fe2 100644
--- a/drivers/gpio/gpio-aggregator.c
+++ b/drivers/gpio/gpio-aggregator.c
@@ -1635,6 +1635,9 @@ static int gpio_aggregator_probe(struct platform_device *pdev)
}
static const struct of_device_id gpio_aggregator_dt_ids[] = {
+ {
+ .compatible = "gpio-aggregator",
+ },
{
.compatible = "gpio-delay",
.data = (void *)FWD_FEATURE_DELAY,
--
2.43.0
next reply other threads:[~2026-02-11 4:42 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-11 4:42 James Hilliard [this message]
2026-02-11 7:04 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260211044216.2885718-1-james.hilliard1@gmail.com \
--to=james.hilliard1@gmail.com \
--cc=brgl@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=krzk+dt@kernel.org \
--cc=linusw@kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@ew.tq-group.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®