[PATCH v1 1/2] regulator: pf9453: Respect IRQ trigger settings from firmware

[Franz Schnyder <fra.schnyder@gmail.com>]

From: Franz Schnyder <franz.schnyder@toradex.com>

The datasheet specifies, that the IRQ_B pin is pulled low when any
unmasked interrupt bit status is changed, and it is released high once
the application processor reads the INT1 register. As it specifies a
level-low behavior, it should not force a falling-edge interrupt.

Remove the IRQF_TRIGGER_FALLING to not force the falling-edge interrupt
and instead rely on the flag from the device tree.

Fixes: 0959b6706325 ("regulator: pf9453: add PMIC PF9453 support")
Cc: stable@vger.kernel.org
Signed-off-by: Franz Schnyder <franz.schnyder@toradex.com>
---
 drivers/regulator/pf9453-regulator.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/regulator/pf9453-regulator.c b/drivers/regulator/pf9453-regulator.c
index 779a6fdb0574..eed3055d1c1c 100644
--- a/drivers/regulator/pf9453-regulator.c
+++ b/drivers/regulator/pf9453-regulator.c
@@ -809,7 +809,7 @@ static int pf9453_i2c_probe(struct i2c_client *i2c)
 	}
 
 	ret = devm_request_threaded_irq(pf9453->dev, pf9453->irq, NULL, pf9453_irq_handler,
-					(IRQF_TRIGGER_FALLING | IRQF_ONESHOT),
+					IRQF_ONESHOT,
 					"pf9453-irq", pf9453);
 	if (ret)
 		return dev_err_probe(pf9453->dev, ret, "Failed to request IRQ: %d\n", pf9453->irq);
-- 
2.43.0