From: Gopi Botlagunta <venkata.botlagunta@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, venkata.valluru@oss.qualcomm.com,
jessica.zhang@oss.qualcomm.com,
Gopi Botlagunta <venkata.botlagunta@oss.qualcomm.com>
Subject: [PATCH] arm64: dts: qcom: Enable lvds panel-DV215FHM-R01 for monaco-evk Mezzanine
Date: Fri, 20 Feb 2026 12:05:26 +0530 [thread overview]
Message-ID: <20260220-enable_rb4_lvds-v1-1-c6296ef9ccdb@oss.qualcomm.com> (raw)
LT9211c bridge and lvds panel node.
LT9211c is powered by default with reset gpio connected to 66.
Signed-off-by: Gopi Botlagunta <venkata.botlagunta@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/monaco-evk-mezzanine.dtso | 117 +++++++++++++++++++++
1 file changed, 117 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/monaco-evk-mezzanine.dtso b/arch/arm64/boot/dts/qcom/monaco-evk-mezzanine.dtso
index 701494d4dd7f..2512bdfbadbf 100644
--- a/arch/arm64/boot/dts/qcom/monaco-evk-mezzanine.dtso
+++ b/arch/arm64/boot/dts/qcom/monaco-evk-mezzanine.dtso
@@ -11,6 +11,58 @@
&{/} {
model = "Qualcomm Technologies, Inc. Monaco-EVK Mezzanine";
+ panel_lvds: panel-lvds@0 {
+ compatible = "panel-lvds";
+ data-mapping = "vesa-24";
+ width-mm = <476>;
+ height-mm = <268>;
+
+ status = "okay";
+
+ panel-timing {
+ clock-frequency = <148500000>;
+ hactive = <1920>;
+ vactive = <1080>;
+ hfront-porch = <88>;
+ hback-porch = <148>;
+ hsync-len = <44>;
+ vfront-porch = <4>;
+ vback-porch = <36>;
+ vsync-len = <5>;
+ de-active = <1>;
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dual-lvds-odd-pixels;
+ panel_in_lvds_odd: endpoint {
+ remote-endpoint = <<9211c_out_odd>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dual-lvds-even-pixels;
+ panel_in_lvds_even: endpoint {
+ remote-endpoint = <<9211c_out_even>;
+ };
+ };
+ };
+ };
+
+ lcd_disp_bias: regulator-lcd-disp-bias {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd_disp_bias";
+ regulator-min-microvolt = <5500000>;
+ regulator-max-microvolt = <5500000>;
+ gpio = <&expander3 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
vreg_0p9: regulator-vreg-0p9 {
compatible = "regulator-fixed";
regulator-name = "VREG_0P9";
@@ -70,6 +122,51 @@ vreg_sys_pwr: regulator-vreg-sys-pwr {
};
};
+&i2c8 {
+ qcom,load-firmware;
+ qcom,xfer-mode = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c8_data_clk>;
+
+ status = "okay";
+
+ lt9211c_codec: lvds-bridge@2d {
+ compatible = "lontium,lt9211c";
+ reg = <0x2d>;
+ reset-gpios = <&tlmm 66 GPIO_ACTIVE_HIGH>;
+ vcc-supply = <&vreg_l5a>;
+
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lt9211c_in: endpoint {
+ data-lanes = <0 1 2 3>;
+ remote-endpoint = <&mdss_dsi0_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ lt9211c_out_odd: endpoint {
+ remote-endpoint = <&panel_in_lvds_odd>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+ lt9211c_out_even: endpoint {
+ remote-endpoint = <&panel_in_lvds_even>;
+ };
+ };
+ };
+ };
+};
+
&i2c15 {
#address-cells = <1>;
#size-cells = <0>;
@@ -89,6 +186,26 @@ nvmem-layout {
};
};
+&mdss {
+ status = "okay";
+};
+
+&mdss_dsi0 {
+ vdda-supply = <&vreg_l5a>;
+ power-supply = <&lcd_disp_bias>;
+ status = "okay";
+};
+
+&mdss_dsi0_out {
+ data-lanes = <0 1 2 3>;
+ remote-endpoint = <<9211c_in>;
+};
+
+&mdss_dsi0_phy {
+ vdds-supply = <&vreg_l4a>;
+ status = "okay";
+};
+
&pcie0 {
iommu-map = <0x0 &pcie_smmu 0x0 0x1>,
<0x100 &pcie_smmu 0x1 0x1>,
---
base-commit: 1a0829927afbfe654c632eb2e779fa32df825b06
change-id: 20260219-enable_rb4_lvds-d7cf92b30b5a
prerequisite-message-id: 20260210103821.4169-2-umang.chheda@oss.qualcomm.com
prerequisite-patch-id: c38266562544ebe10eb4e6d771665c66fd319cab
prerequisite-message-id: 20260217090955.2446470-1-quic_amakhija@quicinc.com
prerequisite-patch-id: a50422285e837760143af6bdfcc6f64d38525752
prerequisite-patch-id: 7bd948199c6ff8d6feec941e2dd4f4266e5ab39b
Best regards,
--
Gopi Botlagunta <venkata.botlagunta@oss.qualcomm.com>
next reply other threads:[~2026-02-20 6:35 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-20 6:35 Gopi Botlagunta [this message]
2026-02-20 7:14 ` Krzysztof Kozlowski
2026-02-20 7:16 ` Krzysztof Kozlowski
2026-02-22 21:43 ` Dmitry Baryshkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260220-enable_rb4_lvds-v1-1-c6296ef9ccdb@oss.qualcomm.com \
--to=venkata.botlagunta@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jessica.zhang@oss.qualcomm.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=venkata.valluru@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®