From: Ian Ray <ian.ray@gehealthcare.com>
To: Guenter Roeck <linux@roeck-us.net>,
Jonathan Corbet <corbet@lwn.net>,
Shuah Khan <skhan@linuxfoundation.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: "Ian Ray" <ian.ray@gehealthcare.com>,
"Bence Csókás" <bence98@sch.bme.hu>,
"Tomaž Zaman" <tomaz@mono.si>,
linux-hwmon@vger.kernel.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org,
"Krzysztof Kozlowski" <krzk@kernel.org>,
devicetree@vger.kernel.org
Subject: [PATCH V3 3/3] hwmon: (ina2xx) Add support for INA234
Date: Fri, 20 Feb 2026 13:20:22 +0200 [thread overview]
Message-ID: <20260220112024.97446-4-ian.ray@gehealthcare.com> (raw)
In-Reply-To: <20260220112024.97446-1-ian.ray@gehealthcare.com>
INA234 is register compatible to INA226 (excepting manufacturer and die
or device id registers) but has different scaling.
Signed-off-by: Ian Ray <ian.ray@gehealthcare.com>
Reviewed-by: Bence Csókás <bence98@sch.bme.hu> # v2
---
Documentation/hwmon/ina2xx.rst | 13 ++++++++++++-
drivers/hwmon/Kconfig | 2 +-
drivers/hwmon/ina2xx.c | 18 ++++++++++++++++++
3 files changed, 31 insertions(+), 2 deletions(-)
diff --git a/Documentation/hwmon/ina2xx.rst b/Documentation/hwmon/ina2xx.rst
index a4ddf4bd2b08..d64e7af46a12 100644
--- a/Documentation/hwmon/ina2xx.rst
+++ b/Documentation/hwmon/ina2xx.rst
@@ -74,6 +74,16 @@ Supported chips:
https://us1.silergy.com/
+ * Texas Instruments INA234
+
+ Prefix: 'ina234'
+
+ Addresses: I2C 0x40 - 0x43
+
+ Datasheet: Publicly available at the Texas Instruments website
+
+ https://www.ti.com/
+
Author: Lothar Felten <lothar.felten@gmail.com>
Description
@@ -89,7 +99,7 @@ interface. The INA220 monitors both shunt drop and supply voltage.
The INA226 is a current shunt and power monitor with an I2C interface.
The INA226 monitors both a shunt voltage drop and bus supply voltage.
-INA230 and INA231 are high or low side current shunt and power monitors
+INA230, INA231, and INA234 are high or low side current shunt and power monitors
with an I2C interface. The chips monitor both a shunt voltage drop and
bus supply voltage.
@@ -132,6 +142,7 @@ Additional entries are available for the following chips:
* ina226
* ina230
* ina231
+ * ina234
* ina260
* sy24655
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 41c381764c2b..6aa8a89f4747 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -2284,7 +2284,7 @@ config SENSORS_INA2XX
select REGMAP_I2C
help
If you say yes here you get support for INA219, INA220, INA226,
- INA230, INA231, INA260, and SY24655 power monitor chips.
+ INA230, INA231, INA234, INA260, and SY24655 power monitor chips.
The INA2xx driver is configured for the default configuration of
the part as described in the datasheet.
diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c
index cd0d39ee7616..836e15a5a780 100644
--- a/drivers/hwmon/ina2xx.c
+++ b/drivers/hwmon/ina2xx.c
@@ -138,6 +138,7 @@ static const struct regmap_config ina2xx_regmap_config = {
enum ina2xx_ids {
ina219,
ina226,
+ ina234,
ina260,
sy24655
};
@@ -191,6 +192,18 @@ static const struct ina2xx_config ina2xx_config[] = {
.has_power_average = false,
.has_update_interval = true,
},
+ [ina234] = {
+ .config_default = INA226_CONFIG_DEFAULT,
+ .calibration_value = 2048,
+ .shunt_div = 400, /* 2.5 µV/LSB raw ADC reading from INA2XX_SHUNT_VOLTAGE */
+ .bus_voltage_shift = 4,
+ .bus_voltage_lsb = 25600,
+ .power_lsb_factor = 32,
+ .has_alerts = true,
+ .has_ishunt = false,
+ .has_power_average = false,
+ .has_update_interval = true,
+ },
[ina260] = {
.config_default = INA260_CONFIG_DEFAULT,
.shunt_div = 400,
@@ -992,6 +1005,7 @@ static const struct i2c_device_id ina2xx_id[] = {
{ "ina226", ina226 },
{ "ina230", ina226 },
{ "ina231", ina226 },
+ { "ina234", ina234 },
{ "ina260", ina260 },
{ "sy24655", sy24655 },
{ }
@@ -1023,6 +1037,10 @@ static const struct of_device_id __maybe_unused ina2xx_of_match[] = {
.compatible = "ti,ina231",
.data = (void *)ina226
},
+ {
+ .compatible = "ti,ina234",
+ .data = (void *)ina234
+ },
{
.compatible = "ti,ina260",
.data = (void *)ina260
--
2.49.0
next prev parent reply other threads:[~2026-02-20 11:20 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-20 11:20 [PATCH V3 0/3] hwmon: INA234 Ian Ray
2026-02-20 11:20 ` [PATCH V3 1/3] dt-bindings: hwmon: ti,ina2xx: Add INA234 device Ian Ray
2026-02-21 23:03 ` Guenter Roeck
2026-02-20 11:20 ` [PATCH V3 2/3] hwmon: (ina2xx) Make it easier to add more devices Ian Ray
2026-02-21 23:03 ` Guenter Roeck
2026-02-20 11:20 ` Ian Ray [this message]
2026-02-21 23:04 ` [PATCH V3 3/3] hwmon: (ina2xx) Add support for INA234 Guenter Roeck
2026-03-02 14:55 ` Jonas Rebmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260220112024.97446-4-ian.ray@gehealthcare.com \
--to=ian.ray@gehealthcare.com \
--cc=bence98@sch.bme.hu \
--cc=conor+dt@kernel.org \
--cc=corbet@lwn.net \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=krzk@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=robh@kernel.org \
--cc=skhan@linuxfoundation.org \
--cc=tomaz@mono.si \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®