From: Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@kernel.org>
To: Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
Paolo Abeni <pabeni@redhat.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Chester Lin <chester62515@gmail.com>,
Matthias Brugger <mbrugger@suse.com>,
Ghennadi Procopciuc <ghennadi.procopciuc@oss.nxp.com>,
NXP S32 Linux Team <s32@nxp.com>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Frank Li <Frank.Li@nxp.com>
Cc: netdev@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, imx@lists.linux.dev,
devicetree@vger.kernel.org,
"Jan Petrous (OSS)" <jan.petrous@oss.nxp.com>
Subject: [PATCH v5 2/4] dt-bindings: net: nxp,s32-dwmac: Declare per-queue interrupts
Date: Mon, 23 Feb 2026 14:58:05 +0100 [thread overview]
Message-ID: <20260223-dwmac_multi_irq-v5-2-8fc699a5fac4@oss.nxp.com> (raw)
In-Reply-To: <20260223-dwmac_multi_irq-v5-0-8fc699a5fac4@oss.nxp.com>
From: "Jan Petrous (OSS)" <jan.petrous@oss.nxp.com>
The DWMAC IP on NXP S32G/R SoCs has connected queue-based IRQ lines,
set them to allow using Multi-IRQ mode.
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Jan Petrous (OSS) <jan.petrous@oss.nxp.com>
---
.../devicetree/bindings/net/nxp,s32-dwmac.yaml | 44 +++++++++++++++++++---
1 file changed, 39 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/nxp,s32-dwmac.yaml b/Documentation/devicetree/bindings/net/nxp,s32-dwmac.yaml
index 1b2934f3c87c..3a0e41b63c3d 100644
--- a/Documentation/devicetree/bindings/net/nxp,s32-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/nxp,s32-dwmac.yaml
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-# Copyright 2021-2024 NXP
+# Copyright 2021-2026 NXP
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/nxp,s32-dwmac.yaml#
@@ -16,6 +16,8 @@ description:
the SoC S32R45 has two instances. The devices can use RGMII/RMII/MII
interface over Pinctrl device or the output can be routed
to the embedded SerDes for SGMII connectivity.
+ The DWMAC instances have connected all RX/TX queues interrupts,
+ enabling load balancing of data traffic across all CPU cores.
properties:
compatible:
@@ -45,10 +47,22 @@ properties:
FlexTimer Modules connect to GMAC_0.
interrupts:
- maxItems: 1
+ minItems: 11
+ maxItems: 11
interrupt-names:
- const: macirq
+ items:
+ - const: macirq
+ - const: tx-queue-0
+ - const: rx-queue-0
+ - const: tx-queue-1
+ - const: rx-queue-1
+ - const: tx-queue-2
+ - const: rx-queue-2
+ - const: tx-queue-3
+ - const: rx-queue-3
+ - const: tx-queue-4
+ - const: rx-queue-4
clocks:
items:
@@ -88,8 +102,28 @@ examples:
<0x0 0x4007c004 0x0 0x4>; /* GMAC_0_CTRL_STS */
nxp,phy-sel = <&gpr 0x4>;
interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ /* CHN 0: tx, rx */
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ /* CHN 1: tx, rx */
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+ /* CHN 2: tx, rx */
+ <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+ /* CHN 3: tx, rx */
+ <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+ /* CHN 4: tx, rx */
+ <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq",
+ "tx-queue-0", "rx-queue-0",
+ "tx-queue-1", "rx-queue-1",
+ "tx-queue-2", "rx-queue-2",
+ "tx-queue-3", "rx-queue-3",
+ "tx-queue-4", "rx-queue-4";
snps,mtl-rx-config = <&mtl_rx_setup>;
snps,mtl-tx-config = <&mtl_tx_setup>;
clocks = <&clks 24>, <&clks 17>, <&clks 16>, <&clks 15>;
--
2.47.0
next prev parent reply other threads:[~2026-02-23 13:58 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-23 13:58 [PATCH v5 0/4] Support multi-channel IRQs in stmmac platform drivers Jan Petrous via B4 Relay
2026-02-23 13:58 ` [PATCH v5 1/4] net: stmmac: platform: read channels irq Jan Petrous via B4 Relay
2026-02-25 9:24 ` [v5,1/4] " Simon Horman
2026-02-25 10:01 ` Jan Petrous
2026-02-23 13:58 ` Jan Petrous via B4 Relay [this message]
2026-02-24 7:06 ` [PATCH v5 2/4] dt-bindings: net: nxp,s32-dwmac: Declare per-queue interrupts Krzysztof Kozlowski
2026-02-24 7:20 ` Jan Petrous
2026-02-23 13:58 ` [PATCH v5 3/4] arm64: dts: s32: set Ethernet channel irqs Jan Petrous via B4 Relay
2026-02-23 13:58 ` [PATCH v5 4/4] stmmac: s32: enable support for Multi-IRQ mode Jan Petrous via B4 Relay
2026-02-25 9:25 ` [v5,4/4] " Simon Horman
2026-02-25 10:02 ` Jan Petrous
2026-02-26 12:02 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260223-dwmac_multi_irq-v5-2-8fc699a5fac4@oss.nxp.com \
--to=devnull+jan.petrous.oss.nxp.com@kernel.org \
--cc=Frank.Li@nxp.com \
--cc=alexandre.torgue@foss.st.com \
--cc=andrew+netdev@lunn.ch \
--cc=chester62515@gmail.com \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=festevam@gmail.com \
--cc=ghennadi.procopciuc@oss.nxp.com \
--cc=imx@lists.linux.dev \
--cc=jan.petrous@oss.nxp.com \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mbrugger@suse.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=s32@nxp.com \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®