[PATCH v6 1/5] net: stmmac: Use helper macro for loop over queue-based arrays

[Jan Petrous via B4 Relay <devnull+jan.petrous.oss.nxp.com@kernel.org>]

From: "Jan Petrous (OSS)" <jan.petrous@oss.nxp.com>

The stmmac driver contains similar pattern for processing queue-based
arrays, ie. interrupt lines, etc. Factor out the for loop and provide
a macro STMMAC_FOREACH_MTL_QUEUE(var, limit).

Signed-off-by: Jan Petrous (OSS) <jan.petrous@oss.nxp.com>
---
 drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c |  2 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac.h        |  3 +++
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c   | 16 ++++++++--------
 3 files changed, 12 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
index 49893b9fb88c..3890e82c69f6 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
@@ -233,7 +233,7 @@ static void dwxgmac2_prog_mtl_tx_algorithms(struct mac_device_info *hw,
 	writel(value, ioaddr + XGMAC_MTL_OPMODE);
 
 	/* Set ETS if desired */
-	for (i = 0; i < MTL_MAX_TX_QUEUES; i++) {
+	STMMAC_FOREACH_MTL_QUEUE(i, MTL_MAX_TX_QUEUES) {
 		value = readl(ioaddr + XGMAC_MTL_TCx_ETS_CONTROL(i));
 		value &= ~XGMAC_TSA;
 		if (ets)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index 51c96a738151..c972ad8e79f8 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -382,6 +382,9 @@ enum stmmac_state {
 
 extern const struct dev_pm_ops stmmac_simple_pm_ops;
 
+#define STMMAC_FOREACH_MTL_QUEUE(var, limit) \
+	for (var = 0; var < (limit); var++)
+
 int stmmac_mdio_unregister(struct net_device *ndev);
 int stmmac_mdio_register(struct net_device *ndev);
 int stmmac_mdio_reset(struct mii_bus *mii);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index edf0799b7236..b920ca17b2be 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3875,7 +3875,7 @@ static int stmmac_request_irq_multi_msi(struct net_device *dev)
 	}
 
 	/* Request Rx MSI irq */
-	for (i = 0; i < priv->plat->rx_queues_to_use; i++) {
+	STMMAC_FOREACH_MTL_QUEUE(i, priv->plat->rx_queues_to_use) {
 		if (i >= MTL_MAX_RX_QUEUES)
 			break;
 		if (priv->rx_irq[i] == 0)
@@ -3899,7 +3899,7 @@ static int stmmac_request_irq_multi_msi(struct net_device *dev)
 	}
 
 	/* Request Tx MSI irq */
-	for (i = 0; i < priv->plat->tx_queues_to_use; i++) {
+	STMMAC_FOREACH_MTL_QUEUE(i, priv->plat->tx_queues_to_use) {
 		if (i >= MTL_MAX_TX_QUEUES)
 			break;
 		if (priv->tx_irq[i] == 0)
@@ -4084,10 +4084,10 @@ static int __stmmac_open(struct net_device *dev,
 			 struct stmmac_dma_conf *dma_conf)
 {
 	struct stmmac_priv *priv = netdev_priv(dev);
+	int ret, i;
 	u32 chan;
-	int ret;
 
-	for (int i = 0; i < MTL_MAX_TX_QUEUES; i++)
+	STMMAC_FOREACH_MTL_QUEUE(i, MTL_MAX_TX_QUEUES)
 		if (priv->dma_conf.tx_queue[i].tbs & STMMAC_TBS_EN)
 			dma_conf->tx_queue[i].tbs = priv->dma_conf.tx_queue[i].tbs;
 	memcpy(&priv->dma_conf, dma_conf, sizeof(*dma_conf));
@@ -7734,9 +7734,9 @@ static int __stmmac_dvr_probe(struct device *device,
 	priv->device = device;
 	priv->dev = ndev;
 
-	for (i = 0; i < MTL_MAX_RX_QUEUES; i++)
+	STMMAC_FOREACH_MTL_QUEUE(i, MTL_MAX_RX_QUEUES)
 		u64_stats_init(&priv->xstats.rxq_stats[i].napi_syncp);
-	for (i = 0; i < MTL_MAX_TX_QUEUES; i++) {
+	STMMAC_FOREACH_MTL_QUEUE(i, MTL_MAX_TX_QUEUES) {
 		u64_stats_init(&priv->xstats.txq_stats[i].q_syncp);
 		u64_stats_init(&priv->xstats.txq_stats[i].napi_syncp);
 	}
@@ -7759,9 +7759,9 @@ static int __stmmac_dvr_probe(struct device *device,
 	priv->sfty_irq = res->sfty_irq;
 	priv->sfty_ce_irq = res->sfty_ce_irq;
 	priv->sfty_ue_irq = res->sfty_ue_irq;
-	for (i = 0; i < MTL_MAX_RX_QUEUES; i++)
+	STMMAC_FOREACH_MTL_QUEUE(i, MTL_MAX_RX_QUEUES)
 		priv->rx_irq[i] = res->rx_irq[i];
-	for (i = 0; i < MTL_MAX_TX_QUEUES; i++)
+	STMMAC_FOREACH_MTL_QUEUE(i, MTL_MAX_TX_QUEUES)
 		priv->tx_irq[i] = res->tx_irq[i];
 
 	if (!is_zero_ether_addr(res->mac))

-- 
2.47.0