From: Erikas Bitovtas <xerikasxx@gmail.com>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
~postmarketos/upstreaming@lists.sr.ht,
phone-devel@vger.kernel.org,
Erikas Bitovtas <xerikasxx@gmail.com>
Subject: [PATCH] arm64: dts: qcom: msm8939-asus-z00t: add ambient light and proximity sensor
Date: Wed, 25 Feb 2026 16:43:24 +0200 [thread overview]
Message-ID: <20260225-z00t-capella-sensor-v1-1-99f767bc326a@gmail.com> (raw)
This device uses Capella CM36686 as its ambient light and proximity
sensor. It is fully compatible with Vishay VCNL4040. Downstream device
tree reports Capella CM36283, but upon probe, a device ID for CM36686 is
actually found. This commit adds support for Capella CM36686 ambient
light and proximity sensor.
Signed-off-by: Erikas Bitovtas <xerikasxx@gmail.com>
---
arm64: dts: qcom: msm8939-asus-z00t: add ambient light and proximity
sensor
This device uses Capella CM36686 as its ambient light and proximity
sensor. Downstream device tree uses the compatible of CM36283, but upon
probe, we can see that a device ID of CM36686 is actually read. Possibly
a driver for CM36283 was adapted to be used on CM36686.
This patch enables Capella CM36686 ambient light and proximity sensor on
Asus ZenFone 2 Laser/Selfie.
---
arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts b/arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts
index ea90b00a2c8a..1a340fa92755 100644
--- a/arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts
+++ b/arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts
@@ -147,6 +147,17 @@ magnetometer@c {
pinctrl-names = "default";
};
+ light-sensor@60 {
+ compatible = "capella,cm36686", "vishay,vcnl4040";
+ reg = <0x60>;
+
+ interrupts-extended = <&tlmm 113 IRQ_TYPE_EDGE_FALLING>;
+ proximity-near-level = <30>;
+
+ pinctrl-0 = <&light_int_default>;
+ pinctrl-names = "default";
+ };
+
imu@68 {
compatible = "invensense,mpu6515";
reg = <0x68>;
@@ -330,4 +341,11 @@ mag_reset_default: mag-reset-default-state {
drive-strength = <2>;
bias-disable;
};
+
+ light_int_default: light-int-default-state {
+ pins = "gpio113";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-pull-up;
+ };
};
---
base-commit: 3ef088b0c5772a6f75634e54aa34f5fc0a2c041c
change-id: 20260225-z00t-capella-sensor-dfd37c2960f6
Best regards,
--
Erikas Bitovtas <xerikasxx@gmail.com>
next reply other threads:[~2026-02-25 14:43 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-25 14:43 Erikas Bitovtas [this message]
2026-02-25 14:48 ` Konrad Dybcio
2026-03-18 13:50 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260225-z00t-capella-sensor-v1-1-99f767bc326a@gmail.com \
--to=xerikasxx@gmail.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=phone-devel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®