From: Qinxin Xia <xiaqinxin@huawei.com>
To: <21cnbao@gmail.com>, <jonathan.cameron@huawei.com>,
<wangzhou1@hisilicon.com>, <xiaqinxin@huawei.com>
Cc: <iommu@lists.linux.dev>, <prime.zeng@huawei.com>,
<fanghao11@huawei.com>, <linux-kernel@vger.kernel.org>,
<linuxarm@huawei.com>, Barry Song <baohua@kernel.org>
Subject: [PATCH v7 3/3] tools/dma: Add dma_map_sg support
Date: Wed, 25 Feb 2026 17:38:00 +0800 [thread overview]
Message-ID: <20260225093800.3625054-4-xiaqinxin@huawei.com> (raw)
In-Reply-To: <20260225093800.3625054-1-xiaqinxin@huawei.com>
Support for dma_map_sg, add option '-m' to distinguish mode.
i) Users can set option '-m' to select mode:
DMA_MAP_BENCH_SINGLE_MODE=0, DMA_MAP_BENCH_SG_MODE:=1
(The mode is also show in the test result).
ii) Users can set option '-g' to set sg_nents
(total count of entries in scatterlist)
the maximum number is 1024. Each of sg buf size is PAGE_SIZE.
e.g
[root@localhost]# ./dma_map_benchmark -m 1 -g 8 -t 8 -s 30 -d 2
dma mapping mode: DMA_MAP_BENCH_SG_MODE
dma mapping benchmark: threads:8 seconds:30 node:-1
dir:FROM_DEVICE granule/sg_nents: 8
average map latency(us):1.4 standard deviation:0.3
average unmap latency(us):1.3 standard deviation:0.3
[root@localhost]# ./dma_map_benchmark -m 0 -g 8 -t 8 -s 30 -d 2
dma mapping mode: DMA_MAP_BENCH_SINGLE_MODE
dma mapping benchmark: threads:8 seconds:30 node:-1
dir:FROM_DEVICE granule/sg_nents: 8
average map latency(us):1.0 standard deviation:0.3
average unmap latency(us):1.3 standard deviation:0.5
Reviewed-by: Barry Song <baohua@kernel.org>
Signed-off-by: Qinxin Xia <xiaqinxin@huawei.com>
---
tools/dma/dma_map_benchmark.c | 23 ++++++++++++++++++++---
1 file changed, 20 insertions(+), 3 deletions(-)
diff --git a/tools/dma/dma_map_benchmark.c b/tools/dma/dma_map_benchmark.c
index dd0ed528e6df..eab0ac611a23 100644
--- a/tools/dma/dma_map_benchmark.c
+++ b/tools/dma/dma_map_benchmark.c
@@ -20,12 +20,19 @@ static char *directions[] = {
"FROM_DEVICE",
};
+static char *mode[] = {
+ "SINGLE_MODE",
+ "SG_MODE",
+};
+
int main(int argc, char **argv)
{
struct map_benchmark map;
int fd, opt;
/* default single thread, run 20 seconds on NUMA_NO_NODE */
int threads = 1, seconds = 20, node = -1;
+ /* default single map mode */
+ int map_mode = DMA_MAP_BENCH_SINGLE_MODE;
/* default dma mask 32bit, bidirectional DMA */
int bits = 32, xdelay = 0, dir = DMA_MAP_BIDIRECTIONAL;
/* default granule 1 PAGESIZE */
@@ -33,7 +40,7 @@ int main(int argc, char **argv)
int cmd = DMA_MAP_BENCHMARK;
- while ((opt = getopt(argc, argv, "t:s:n:b:d:x:g:")) != -1) {
+ while ((opt = getopt(argc, argv, "t:s:n:b:d:x:g:m:")) != -1) {
switch (opt) {
case 't':
threads = atoi(optarg);
@@ -56,11 +63,20 @@ int main(int argc, char **argv)
case 'g':
granule = atoi(optarg);
break;
+ case 'm':
+ map_mode = atoi(optarg);
+ break;
default:
return -1;
}
}
+ if (map_mode < 0 || map_mode >= DMA_MAP_BENCH_MODE_MAX) {
+ fprintf(stderr, "invalid map mode, SINGLE_MODE:%d, SG_MODE: %d\n",
+ DMA_MAP_BENCH_SINGLE_MODE, DMA_MAP_BENCH_SG_MODE);
+ exit(1);
+ }
+
if (threads <= 0 || threads > DMA_MAP_MAX_THREADS) {
fprintf(stderr, "invalid number of threads, must be in 1-%d\n",
DMA_MAP_MAX_THREADS);
@@ -110,14 +126,15 @@ int main(int argc, char **argv)
map.dma_dir = dir;
map.dma_trans_ns = xdelay;
map.granule = granule;
+ map.map_mode = map_mode;
if (ioctl(fd, cmd, &map)) {
perror("ioctl");
exit(1);
}
- printf("dma mapping benchmark: threads:%d seconds:%d node:%d dir:%s granule: %d\n",
- threads, seconds, node, directions[dir], granule);
+ printf("dma mapping benchmark(%s): threads:%d seconds:%d node:%d dir:%s granule:%d\n",
+ mode[map_mode], threads, seconds, node, directions[dir], granule);
printf("average map latency(us):%.1f standard deviation:%.1f\n",
map.avg_map_100ns/10.0, map.map_stddev/10.0);
printf("average unmap latency(us):%.1f standard deviation:%.1f\n",
--
2.33.0
next prev parent reply other threads:[~2026-02-25 9:38 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-25 9:37 [PATCH v7 0/3] dma-mapping: benchmark: Add support for dma_map_sg Qinxin Xia
2026-02-25 9:37 ` [PATCH v7 1/3] dma-mapping: benchmark: modify the framework to adapt to more map modes Qinxin Xia
2026-02-25 9:37 ` [PATCH v7 2/3] dma-mapping: benchmark: add support for dma_map_sg Qinxin Xia
2026-02-25 9:38 ` Qinxin Xia [this message]
2026-02-25 10:42 ` [PATCH v7 0/3] dma-mapping: benchmark: Add " Barry Song
2026-03-06 7:54 ` Marek Szyprowski
[not found] ` <CGME20260306085057eucas1p176a39f28514d3c7481f5813d597086ca@eucas1p1.samsung.com>
2026-03-06 8:50 ` Marek Szyprowski
2026-03-07 7:46 ` Qinxin Xia
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260225093800.3625054-4-xiaqinxin@huawei.com \
--to=xiaqinxin@huawei.com \
--cc=21cnbao@gmail.com \
--cc=baohua@kernel.org \
--cc=fanghao11@huawei.com \
--cc=iommu@lists.linux.dev \
--cc=jonathan.cameron@huawei.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=prime.zeng@huawei.com \
--cc=wangzhou1@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®