From: Antoniu Miclaus <antoniu.miclaus@analog.com>
To: "Antoniu Miclaus" <antoniu.miclaus@analog.com>,
"Lars-Peter Clausen" <lars@metafoo.de>,
"Michael Hennerich" <Michael.Hennerich@analog.com>,
"Jonathan Cameron" <jic23@kernel.org>,
"David Lechner" <dlechner@baylibre.com>,
"Nuno Sá" <nuno.sa@analog.com>,
"Andy Shevchenko" <andy@kernel.org>,
linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 4/6] iio: frequency: adf4377: add dev variable and use dev_err_probe
Date: Wed, 25 Feb 2026 17:05:50 +0200 [thread overview]
Message-ID: <20260225150615.274078-5-antoniu.miclaus@analog.com> (raw)
In-Reply-To: <20260225150615.274078-1-antoniu.miclaus@analog.com>
Introduce a struct device *dev local variable and replace dev_err() +
return with dev_err_probe() in functions that use devm_ managed
resources. This simplifies error handling and ensures proper logging
of deferred probes.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
---
drivers/iio/frequency/adf4377.c | 57 ++++++++++++++++-----------------
1 file changed, 27 insertions(+), 30 deletions(-)
diff --git a/drivers/iio/frequency/adf4377.c b/drivers/iio/frequency/adf4377.c
index fa686f785fa4..cfc0c524c4a4 100644
--- a/drivers/iio/frequency/adf4377.c
+++ b/drivers/iio/frequency/adf4377.c
@@ -706,23 +706,21 @@ static void adf4377_gpio_init(struct adf4377_state *st)
static int adf4377_init(struct adf4377_state *st)
{
- struct spi_device *spi = st->spi;
+ struct device *dev = &st->spi->dev;
int ret;
adf4377_gpio_init(st);
ret = adf4377_soft_reset(st);
- if (ret) {
- dev_err(&spi->dev, "Failed to soft reset.\n");
- return ret;
- }
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "Failed to soft reset.\n");
ret = regmap_multi_reg_write(st->regmap, adf4377_reg_defaults,
ARRAY_SIZE(adf4377_reg_defaults));
- if (ret) {
- dev_err(&spi->dev, "Failed to set default registers.\n");
- return ret;
- }
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "Failed to set default registers.\n");
ret = regmap_update_bits(st->regmap, 0x00,
ADF4377_0000_SDO_ACTIVE_MSK | ADF4377_0000_SDO_ACTIVE_R_MSK,
@@ -730,10 +728,9 @@ static int adf4377_init(struct adf4377_state *st)
ADF4377_0000_SDO_ACTIVE_SPI_4W) |
FIELD_PREP(ADF4377_0000_SDO_ACTIVE_R_MSK,
ADF4377_0000_SDO_ACTIVE_SPI_4W));
- if (ret) {
- dev_err(&spi->dev, "Failed to set 4-Wire Operation.\n");
- return ret;
- }
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "Failed to set 4-Wire Operation.\n");
st->clkin_freq = clk_get_rate(st->clkin);
@@ -747,10 +744,9 @@ static int adf4377_init(struct adf4377_state *st)
FIELD_PREP(ADF4377_001A_PD_PFDCP_MSK, 0) |
FIELD_PREP(ADF4377_001A_PD_CLKOUT1_MSK, 0) |
FIELD_PREP(ADF4377_001A_PD_CLKOUT2_MSK, 0));
- if (ret) {
- dev_err(&spi->dev, "Failed to set power down registers.\n");
- return ret;
- }
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "Failed to set power down registers.\n");
/* Set Mux Output */
ret = regmap_update_bits(st->regmap, 0x1D,
@@ -882,35 +878,35 @@ static const struct iio_chan_spec adf4377_channels[] = {
static int adf4377_properties_parse(struct adf4377_state *st)
{
- struct spi_device *spi = st->spi;
+ struct device *dev = &st->spi->dev;
int ret;
- st->clkin = devm_clk_get_enabled(&spi->dev, "ref_in");
+ st->clkin = devm_clk_get_enabled(dev, "ref_in");
if (IS_ERR(st->clkin))
- return dev_err_probe(&spi->dev, PTR_ERR(st->clkin),
+ return dev_err_probe(dev, PTR_ERR(st->clkin),
"failed to get the reference input clock\n");
- st->gpio_ce = devm_gpiod_get_optional(&st->spi->dev, "chip-enable",
+ st->gpio_ce = devm_gpiod_get_optional(dev, "chip-enable",
GPIOD_OUT_LOW);
if (IS_ERR(st->gpio_ce))
- return dev_err_probe(&spi->dev, PTR_ERR(st->gpio_ce),
+ return dev_err_probe(dev, PTR_ERR(st->gpio_ce),
"failed to get the CE GPIO\n");
- st->gpio_enclk1 = devm_gpiod_get_optional(&st->spi->dev, "clk1-enable",
+ st->gpio_enclk1 = devm_gpiod_get_optional(dev, "clk1-enable",
GPIOD_OUT_LOW);
if (IS_ERR(st->gpio_enclk1))
- return dev_err_probe(&spi->dev, PTR_ERR(st->gpio_enclk1),
+ return dev_err_probe(dev, PTR_ERR(st->gpio_enclk1),
"failed to get the CE GPIO\n");
if (st->chip_info->has_gpio_enclk2) {
- st->gpio_enclk2 = devm_gpiod_get_optional(&st->spi->dev, "clk2-enable",
+ st->gpio_enclk2 = devm_gpiod_get_optional(dev, "clk2-enable",
GPIOD_OUT_LOW);
if (IS_ERR(st->gpio_enclk2))
- return dev_err_probe(&spi->dev, PTR_ERR(st->gpio_enclk2),
+ return dev_err_probe(dev, PTR_ERR(st->gpio_enclk2),
"failed to get the CE GPIO\n");
}
- ret = device_property_match_property_string(&spi->dev, "adi,muxout-select",
+ ret = device_property_match_property_string(dev, "adi,muxout-select",
adf4377_muxout_modes,
ARRAY_SIZE(adf4377_muxout_modes));
if (ret >= 0)
@@ -1055,9 +1051,10 @@ static int adf4377_probe(struct spi_device *spi)
struct iio_dev *indio_dev;
struct regmap *regmap;
struct adf4377_state *st;
+ struct device *dev = &spi->dev;
int ret;
- indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
if (!indio_dev)
return -ENOMEM;
@@ -1080,7 +1077,7 @@ static int adf4377_probe(struct spi_device *spi)
return ret;
st->nb.notifier_call = adf4377_freq_change;
- ret = devm_clk_notifier_register(&spi->dev, st->clkin, &st->nb);
+ ret = devm_clk_notifier_register(dev, st->clkin, &st->nb);
if (ret)
return ret;
@@ -1097,7 +1094,7 @@ static int adf4377_probe(struct spi_device *spi)
indio_dev->num_channels = ARRAY_SIZE(adf4377_channels);
}
- return devm_iio_device_register(&spi->dev, indio_dev);
+ return devm_iio_device_register(dev, indio_dev);
}
static const struct spi_device_id adf4377_id[] = {
--
2.43.0
next prev parent reply other threads:[~2026-02-25 15:07 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-25 15:05 [PATCH v3 0/6] iio: use dev_err_probe in probe path for ADI drivers Antoniu Miclaus
2026-02-25 15:05 ` [PATCH v3 1/6] iio: frequency: adrf6780: add dev variable and use dev_err_probe Antoniu Miclaus
2026-02-25 15:05 ` [PATCH v3 2/6] iio: frequency: admv1014: " Antoniu Miclaus
2026-02-25 15:05 ` [PATCH v3 3/6] iio: frequency: admv1013: " Antoniu Miclaus
2026-02-25 15:05 ` Antoniu Miclaus [this message]
2026-02-25 15:05 ` [PATCH v3 5/6] iio: dac: ad7293: " Antoniu Miclaus
2026-02-25 15:05 ` [PATCH v3 6/6] iio: filter: admv8818: " Antoniu Miclaus
2026-02-25 16:15 ` [PATCH v3 0/6] iio: use dev_err_probe in probe path for ADI drivers Andy Shevchenko
2026-02-27 11:23 ` Miclaus, Antoniu
2026-02-27 14:48 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260225150615.274078-5-antoniu.miclaus@analog.com \
--to=antoniu.miclaus@analog.com \
--cc=Michael.Hennerich@analog.com \
--cc=andy@kernel.org \
--cc=dlechner@baylibre.com \
--cc=jic23@kernel.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nuno.sa@analog.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®