From: Xiaolei Wang <xiaolei.wang@windriver.com>
To: sakari.ailus@linux.intel.com, tarang.raval@siliconsignals.io,
laurent.pinchart@ideasonboard.com,
dave.stevenson@raspberrypi.com, jacopo@jmondi.org,
mchehab@kernel.org, prabhakar.mahadev-lad.rj@bp.renesas.com,
hverkuil+cisco@kernel.org, johannes.goede@oss.qualcomm.com,
hverkuil-cisco@xs4all.nl, jai.luthra@ideasonboard.com,
richard.leitner@linux.dev, Xiaolei.Wang@windriver.com
Cc: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 3/3] media: i2c: ov9282: switch to {enable,disable}_streams
Date: Sat, 28 Feb 2026 16:34:01 +0800 [thread overview]
Message-ID: <20260228083401.1007434-4-xiaolei.wang@windriver.com> (raw)
In-Reply-To: <20260228083401.1007434-1-xiaolei.wang@windriver.com>
Switch from s_stream to enable_streams and disable_streams callbacks.
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
---
drivers/media/i2c/ov9282.c | 82 ++++++++++++--------------------------
1 file changed, 25 insertions(+), 57 deletions(-)
diff --git a/drivers/media/i2c/ov9282.c b/drivers/media/i2c/ov9282.c
index aa5a105136bf..b080a56d83a9 100644
--- a/drivers/media/i2c/ov9282.c
+++ b/drivers/media/i2c/ov9282.c
@@ -921,13 +921,9 @@ static int ov9282_get_selection(struct v4l2_subdev *sd,
return -EINVAL;
}
-/**
- * ov9282_start_streaming() - Start sensor stream
- * @ov9282: pointer to ov9282 device
- *
- * Return: 0 if successful, error code otherwise.
- */
-static int ov9282_start_streaming(struct ov9282 *ov9282)
+static int ov9282_enable_streams(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *state, u32 pad,
+ u64 streams_mask)
{
const struct reg_sequence bitdepth_regs[2][2] = {
{
@@ -938,16 +934,21 @@ static int ov9282_start_streaming(struct ov9282 *ov9282)
{OV9282_REG_ANA_CORE_2, OV9282_ANA_CORE2_RAW8},
}
};
+ struct ov9282 *ov9282 = to_ov9282(sd);
const struct ov9282_reg_list *reg_list;
int bitdepth_index;
int ret;
+ ret = pm_runtime_resume_and_get(ov9282->dev);
+ if (ret)
+ return ret;
+
/* Write common registers */
ret = regmap_multi_reg_write(ov9282->regmap, common_regs,
ARRAY_SIZE(common_regs));
if (ret) {
dev_err(ov9282->dev, "fail to write common registers");
- return ret;
+ goto done;
}
bitdepth_index = ov9282->code == MEDIA_BUS_FMT_Y10_1X10 ? 0 : 1;
@@ -955,7 +956,7 @@ static int ov9282_start_streaming(struct ov9282 *ov9282)
bitdepth_regs[bitdepth_index], 2);
if (ret) {
dev_err(ov9282->dev, "fail to write bitdepth regs");
- return ret;
+ goto done;
}
/* Write sensor mode registers */
@@ -964,75 +965,40 @@ static int ov9282_start_streaming(struct ov9282 *ov9282)
reg_list->num_of_regs);
if (ret) {
dev_err(ov9282->dev, "fail to write initial registers");
- return ret;
+ goto done;
}
/* Setup handler will write actual exposure and gain */
ret = __v4l2_ctrl_handler_setup(ov9282->sd.ctrl_handler);
if (ret) {
dev_err(ov9282->dev, "fail to setup handler");
- return ret;
+ goto done;
}
/* Start streaming */
ret = cci_write(ov9282->regmap, OV9282_REG_MODE_SELECT,
OV9282_MODE_STREAMING, NULL);
- if (ret) {
+ if (ret)
dev_err(ov9282->dev, "fail to start streaming");
- return ret;
- }
- return 0;
-}
+done:
+ if (ret)
+ pm_runtime_put(ov9282->dev);
-/**
- * ov9282_stop_streaming() - Stop sensor stream
- * @ov9282: pointer to ov9282 device
- *
- * Return: 0 if successful, error code otherwise.
- */
-static int ov9282_stop_streaming(struct ov9282 *ov9282)
-{
- return cci_write(ov9282->regmap, OV9282_REG_MODE_SELECT,
- OV9282_MODE_STANDBY, NULL);
+ return ret;
}
-/**
- * ov9282_set_stream() - Enable sensor streaming
- * @sd: pointer to ov9282 subdevice
- * @enable: set to enable sensor streaming
- *
- * Return: 0 if successful, error code otherwise.
- */
-static int ov9282_set_stream(struct v4l2_subdev *sd, int enable)
+static int ov9282_disable_streams(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *state, u32 pad,
+ u64 streams_mask)
{
struct ov9282 *ov9282 = to_ov9282(sd);
- struct v4l2_subdev_state *state;
int ret;
- state = v4l2_subdev_lock_and_get_active_state(sd);
-
- if (enable) {
- ret = pm_runtime_resume_and_get(ov9282->dev);
- if (ret)
- goto error_unlock;
-
- ret = ov9282_start_streaming(ov9282);
- if (ret)
- goto error_power_off;
- } else {
- ov9282_stop_streaming(ov9282);
- pm_runtime_put(ov9282->dev);
- }
-
- v4l2_subdev_unlock_state(state);
-
- return 0;
+ ret = cci_write(ov9282->regmap, OV9282_REG_MODE_SELECT,
+ OV9282_MODE_STANDBY, NULL);
-error_power_off:
pm_runtime_put(ov9282->dev);
-error_unlock:
- v4l2_subdev_unlock_state(state);
return ret;
}
@@ -1164,7 +1130,7 @@ static const struct v4l2_subdev_core_ops ov9282_core_ops = {
};
static const struct v4l2_subdev_video_ops ov9282_video_ops = {
- .s_stream = ov9282_set_stream,
+ .s_stream = v4l2_subdev_s_stream_helper,
};
static const struct v4l2_subdev_pad_ops ov9282_pad_ops = {
@@ -1173,6 +1139,8 @@ static const struct v4l2_subdev_pad_ops ov9282_pad_ops = {
.get_fmt = ov9282_get_pad_format,
.set_fmt = ov9282_set_pad_format,
.get_selection = ov9282_get_selection,
+ .enable_streams = ov9282_enable_streams,
+ .disable_streams = ov9282_disable_streams,
};
static const struct v4l2_subdev_ops ov9282_subdev_ops = {
--
2.43.0
next prev parent reply other threads:[~2026-02-28 8:35 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-28 8:33 [PATCH 0/3] media: i2c: ov9282: Modernize driver with CCI and streams API Xiaolei Wang
2026-02-28 8:33 ` [PATCH 1/3] media: i2c: ov9282: Convert to CCI register access helpers Xiaolei Wang
2026-02-28 18:12 ` Tarang Raval
2026-03-01 6:35 ` xiaolei wang
2026-02-28 8:34 ` [PATCH 2/3] media: i2c: ov9282: Switch to using the sub-device state lock Xiaolei Wang
2026-02-28 18:27 ` Tarang Raval
2026-03-01 6:37 ` xiaolei wang
2026-02-28 8:34 ` Xiaolei Wang [this message]
2026-02-28 18:45 ` [PATCH 3/3] media: i2c: ov9282: switch to {enable,disable}_streams Tarang Raval
2026-03-01 6:40 ` xiaolei wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260228083401.1007434-4-xiaolei.wang@windriver.com \
--to=xiaolei.wang@windriver.com \
--cc=dave.stevenson@raspberrypi.com \
--cc=hverkuil+cisco@kernel.org \
--cc=hverkuil-cisco@xs4all.nl \
--cc=jacopo@jmondi.org \
--cc=jai.luthra@ideasonboard.com \
--cc=johannes.goede@oss.qualcomm.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=richard.leitner@linux.dev \
--cc=sakari.ailus@linux.intel.com \
--cc=tarang.raval@siliconsignals.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®