[PATCH] arm64: defconfig: Enable configurations for Toradex Aquila AM69

[Francesco Dolcini <francesco@dolcini.it>]

From: Francesco Dolcini <francesco.dolcini@toradex.com>

Enable the configurations needed for Aquila AM69 SoM and compatible
carrier boards.

 - CONFIG_SENSORS_AMC6821, needed for the fan controller on the clover
   and dev carrier board (as module).
 - CONFIG_POWER_RESET_GPIO and CONFIG_POWER_RESET_GPIO_RESTART needed
   for poweroff and restart functionalities (as built-in, it's not
   possible to set them as 'm').

Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
---
 arch/arm64/configs/defconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 4ed70ab7ee85..af679604d9ed 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -729,6 +729,8 @@ CONFIG_GPIO_MACSMC=m
 CONFIG_GPIO_MAX77620=y
 CONFIG_GPIO_SL28CPLD=m
 CONFIG_GPIO_AGGREGATOR=m
+CONFIG_POWER_RESET_GPIO=y
+CONFIG_POWER_RESET_GPIO_RESTART=y
 CONFIG_POWER_RESET_MACSMC=m
 CONFIG_POWER_RESET_MSM=y
 CONFIG_POWER_RESET_QCOM_PON=m
@@ -757,6 +759,7 @@ CONFIG_SENSORS_PWM_FAN=m
 CONFIG_SENSORS_RASPBERRYPI_HWMON=m
 CONFIG_SENSORS_SA67MCU=m
 CONFIG_SENSORS_SL28CPLD=m
+CONFIG_SENSORS_AMC6821=m
 CONFIG_SENSORS_INA2XX=m
 CONFIG_SENSORS_INA3221=m
 CONFIG_SENSORS_TMP102=m
-- 
2.47.3