[PATCH v2 0/7] riscv: spacemit: enable SD card support with UHS modes for OrangePi RV2

[Iker Pedrosa <ikerpedrosam@gmail.com>]

This series enables complete SD card support for the Spacemit K1-based
OrangePi RV2 board, including UHS (Ultra High Speed) modes for
high-performance SD card operation.

Background

The Spacemit K1 SoC includes an SDHCI controller capable of supporting
SD cards up to UHS-I speeds (SDR104 at 208MHz). However, mainline
currently lacks basic SD controller configuration, SDHCI driver
enhancements for voltage switching and tuning, and power management
infrastructure.

Implementation

The series enables SD card support through coordinated layers:

- Hardware infrastructure (patches 1-2): Device tree bindings for voltage
switching hardware and essential clock infrastructure.
- SDHCI driver enhancements (patches 3-7): Regulator framework
integration, pinctrl state switching for voltage domains, AIB register
programming, and comprehensive SDR tuning support for reliable UHS
operation.
- SoC and board integration (patches 8-10): Complete K1 SoC controller
definitions, PMIC power infrastructure, and OrangePi RV2 board enablement
with full UHS support.

This transforms the OrangePi RV2 from having no SD card support to full
UHS-I capability, enabling high-performance storage up to 208MHz.

Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
---
Changes in v2:
- Removed custom AIB voltage switching code per maintainer feedback. The
  existing pinctrl driver already handles AIB voltage switching
  automatically via power-source property changes during UHS mode
  transitions. This eliminates code duplication.
- Squashed regulator and pinctrl commits into single voltage switching
  implementation.
- Moved voltage switching callback from dynamic probe assignment to
  static sdhci_ops declaration. Removed redundant SDHCI core call since
  the framework handles standard voltage switching automatically.
- Made clock override (SDHC_OVRRD_CLK_OEN | SDHC_FORCE_CLK_ON)
  conditional for SD/SDIO cards only. This follows vendor driver pattern
  of differentiating SD and eMMC card handling.
- Include no-mmc property for SD card.
- Link to v1: https://lore.kernel.org/r/20260302-orangepi-sd-card-uhs-v1-0-89c219973c0c@gmail.com

---
Iker Pedrosa (7):
      mmc: sdhci-of-k1: enable essential clock infrastructure for SD operation
      mmc: sdhci-of-k1: add regulator and pinctrl voltage switching support
      mmc: sdhci-of-k1: add SDR tuning infrastructure
      mmc: sdhci-of-k1: add comprehensive SDR tuning support
      riscv: dts: spacemit: k1: add SD card controller and pinctrl support
      riscv: dts: spacemit: k1-orangepi-rv2: add PMIC and power infrastructure
      riscv: dts: spacemit: k1-orangepi-rv2: add SD card support with UHS modes

 arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts |  67 ++++++
 arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi     |  40 ++++
 arch/riscv/boot/dts/spacemit/k1.dtsi             |  13 ++
 drivers/mmc/host/sdhci-of-k1.c                   | 252 +++++++++++++++++++++++
 4 files changed, 372 insertions(+)
---
base-commit: ec1fb4e55df47ed043ab2ccc6787e39b9d67e49b
change-id: 20260226-orangepi-sd-card-uhs-0ecb05839b0c

Best regards,
-- 
Iker Pedrosa <ikerpedrosam@gmail.com>