[PATCH v2 2/9] media: i2c: ov08d10: fix image vertical start setting

[Matthias Fend <matthias.fend@emfend.at>]

The current settings for the "image vertical start" register appear to be
incorrect. While this only results in an incorrect start line for native
modes, this faulty setting causes actual problems in binning mode. At least
on an i.MX8MP test system, only corrupted frames could be received.
To correct this, the recommended settings from the reference register sets
are used for all modes. Since this shifts the start by one line, the Bayer
pattern also changes, which has also been corrected.

Fixes: 7be91e02ed57 ("media: i2c: Add ov08d10 camera sensor driver")
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
---
 drivers/media/i2c/ov08d10.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/media/i2c/ov08d10.c b/drivers/media/i2c/ov08d10.c
index 5b02f61e359fa900da9290c1c151aa01b9d70e6e..5e1b8b58b3d64bcf20a7b1a4e47f547d2fd82998 100644
--- a/drivers/media/i2c/ov08d10.c
+++ b/drivers/media/i2c/ov08d10.c
@@ -217,7 +217,7 @@ static const struct ov08d10_reg lane_2_mode_3280x2460[] = {
 	{0x9a, 0x30},
 	{0xa8, 0x02},
 	{0xfd, 0x02},
-	{0xa1, 0x01},
+	{0xa1, 0x00},
 	{0xa2, 0x09},
 	{0xa3, 0x9c},
 	{0xa5, 0x00},
@@ -335,7 +335,7 @@ static const struct ov08d10_reg lane_2_mode_3264x2448[] = {
 	{0x9a, 0x30},
 	{0xa8, 0x02},
 	{0xfd, 0x02},
-	{0xa1, 0x09},
+	{0xa1, 0x08},
 	{0xa2, 0x09},
 	{0xa3, 0x90},
 	{0xa5, 0x08},
@@ -467,7 +467,7 @@ static const struct ov08d10_reg lane_2_mode_1632x1224[] = {
 	{0xaa, 0xd0},
 	{0xab, 0x06},
 	{0xac, 0x68},
-	{0xa1, 0x09},
+	{0xa1, 0x04},
 	{0xa2, 0x04},
 	{0xa3, 0xc8},
 	{0xa5, 0x04},
@@ -613,8 +613,8 @@ static const struct ov08d10_lane_cfg lane_cfg_2 = {
 static u32 ov08d10_get_format_code(struct ov08d10 *ov08d10)
 {
 	static const u32 codes[2][2] = {
-		{ MEDIA_BUS_FMT_SGRBG10_1X10, MEDIA_BUS_FMT_SRGGB10_1X10},
-		{ MEDIA_BUS_FMT_SBGGR10_1X10, MEDIA_BUS_FMT_SGBRG10_1X10},
+		{ MEDIA_BUS_FMT_SBGGR10_1X10, MEDIA_BUS_FMT_SGBRG10_1X10 },
+		{ MEDIA_BUS_FMT_SGRBG10_1X10, MEDIA_BUS_FMT_SRGGB10_1X10 },
 	};
 
 	return codes[ov08d10->vflip->val][ov08d10->hflip->val];

-- 
2.34.1