From: John Hubbard <jhubbard@nvidia.com>
To: Danilo Krummrich <dakr@kernel.org>,
Alexandre Courbot <acourbot@nvidia.com>
Cc: "Joel Fernandes" <joelagnelf@nvidia.com>,
"Timur Tabi" <ttabi@nvidia.com>,
"Alistair Popple" <apopple@nvidia.com>,
"Eliot Courtney" <ecourtney@nvidia.com>,
"Shashank Sharma" <shashanks@nvidia.com>,
"Zhi Wang" <zhiw@nvidia.com>, "David Airlie" <airlied@gmail.com>,
"Simona Vetter" <simona@ffwll.ch>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Miguel Ojeda" <ojeda@kernel.org>,
"Alex Gaynor" <alex.gaynor@gmail.com>,
"Boqun Feng" <boqun.feng@gmail.com>,
"Gary Guo" <gary@garyguo.net>,
"Björn Roy Baron" <bjorn3_gh@protonmail.com>,
"Benno Lossin" <lossin@kernel.org>,
"Andreas Hindborg" <a.hindborg@kernel.org>,
"Alice Ryhl" <aliceryhl@google.com>,
"Trevor Gross" <tmgross@umich.edu>,
rust-for-linux@vger.kernel.org,
LKML <linux-kernel@vger.kernel.org>,
"John Hubbard" <jhubbard@nvidia.com>
Subject: [PATCH v6 15/34] gpu: nova-core: Hopper/Blackwell: add FMC firmware image, in support of FSP
Date: Mon, 9 Mar 2026 19:11:05 -0700 [thread overview]
Message-ID: <20260310021125.117855-16-jhubbard@nvidia.com> (raw)
In-Reply-To: <20260310021125.117855-1-jhubbard@nvidia.com>
FSP is a hardware unit that runs FMC firmware. The FMC ELF file is
loaded and stored in two forms: the "image" ELF section alone (which
FSP uses for boot) and the full ELF (needed later for signature
extraction during Chain of Trust verification).
Co-developed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
---
drivers/gpu/nova-core/firmware.rs | 1 +
drivers/gpu/nova-core/firmware/fsp.rs | 44 +++++++++++++++++++++++++++
2 files changed, 45 insertions(+)
create mode 100644 drivers/gpu/nova-core/firmware/fsp.rs
diff --git a/drivers/gpu/nova-core/firmware.rs b/drivers/gpu/nova-core/firmware.rs
index 112dcb431e26..6a0a02177f6f 100644
--- a/drivers/gpu/nova-core/firmware.rs
+++ b/drivers/gpu/nova-core/firmware.rs
@@ -27,6 +27,7 @@
};
pub(crate) mod booter;
+pub(crate) mod fsp;
pub(crate) mod fwsec;
pub(crate) mod gsp;
pub(crate) mod riscv;
diff --git a/drivers/gpu/nova-core/firmware/fsp.rs b/drivers/gpu/nova-core/firmware/fsp.rs
new file mode 100644
index 000000000000..cea9532ba5ff
--- /dev/null
+++ b/drivers/gpu/nova-core/firmware/fsp.rs
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0
+
+//! FSP is a hardware unit that runs FMC firmware.
+
+use kernel::{
+ device,
+ prelude::*, //
+};
+
+use crate::{
+ dma::DmaObject,
+ firmware::elf,
+ gpu::Chipset, //
+};
+
+#[expect(unused)]
+pub(crate) struct FspFirmware {
+ /// FMC firmware image data (only the "image" ELF section).
+ fmc_image: DmaObject,
+ /// Full FMC ELF data (for signature extraction).
+ fmc_full: DmaObject,
+}
+
+impl FspFirmware {
+ #[expect(unused)]
+ pub(crate) fn new(
+ dev: &device::Device<device::Bound>,
+ chipset: Chipset,
+ ver: &str,
+ ) -> Result<Self> {
+ let fw = super::request_firmware(dev, chipset, "fmc", ver)?;
+
+ // FSP expects only the "image" section, not the entire ELF file.
+ let fmc_image_data = elf::elf_section(fw.data(), "image").ok_or_else(|| {
+ dev_err!(dev, "FMC ELF file missing 'image' section\n");
+ EINVAL
+ })?;
+
+ Ok(Self {
+ fmc_image: DmaObject::from_data(dev, fmc_image_data)?,
+ fmc_full: DmaObject::from_data(dev, fw.data())?,
+ })
+ }
+}
--
2.53.0
next prev parent reply other threads:[~2026-03-10 2:11 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-10 2:10 [PATCH v6 00/34] gpu: nova-core: firmware: Hopper/Blackwell support John Hubbard
2026-03-10 2:10 ` [PATCH v6 01/34] gpu: nova-core: print FB sizes, along with ranges John Hubbard
2026-03-10 11:21 ` Alexandre Courbot
2026-03-10 2:10 ` [PATCH v6 02/34] gpu: nova-core: add FbRange.len() and use it in boot.rs John Hubbard
2026-03-10 11:21 ` Alexandre Courbot
2026-03-10 2:10 ` [PATCH v6 03/34] gpu: nova-core: Hopper/Blackwell: basic GPU identification John Hubbard
2026-03-10 8:06 ` Alexandre Courbot
2026-03-10 16:54 ` John Hubbard
2026-03-10 2:10 ` [PATCH v6 04/34] gpu: nova-core: factor .fwsignature* selection into a new find_gsp_sigs_section() John Hubbard
2026-03-10 2:10 ` [PATCH v6 05/34] gpu: nova-core: use GPU Architecture to simplify HAL selections John Hubbard
2026-03-10 2:10 ` [PATCH v6 06/34] gpu: nova-core: apply the one "use" item per line policy to commands.rs John Hubbard
2026-03-10 11:21 ` Alexandre Courbot
2026-03-10 2:10 ` [PATCH v6 07/34] gpu: nova-core: move GPU init and DMA mask setup into Gpu::new() John Hubbard
2026-03-10 8:23 ` Alexandre Courbot
2026-03-10 2:10 ` [PATCH v6 08/34] gpu: nova-core: set DMA mask width based on GPU architecture John Hubbard
2026-03-10 2:10 ` [PATCH v6 09/34] gpu: nova-core: Hopper/Blackwell: skip GFW boot waiting John Hubbard
2026-03-10 10:23 ` Alexandre Courbot
2026-03-10 2:11 ` [PATCH v6 10/34] gpu: nova-core: move firmware image parsing code to firmware.rs John Hubbard
2026-03-10 10:28 ` Alexandre Courbot
2026-03-10 2:11 ` [PATCH v6 11/34] gpu: nova-core: factor out an elf_str() function John Hubbard
2026-03-10 2:11 ` [PATCH v6 12/34] gpu: nova-core: don't assume 64-bit firmware images John Hubbard
2026-03-10 10:38 ` Alexandre Courbot
2026-03-10 2:11 ` [PATCH v6 13/34] gpu: nova-core: add support for 32-bit " John Hubbard
2026-03-10 2:11 ` [PATCH v6 14/34] gpu: nova-core: add auto-detection of 32-bit, 64-bit " John Hubbard
2026-03-10 2:11 ` John Hubbard [this message]
2026-03-10 2:11 ` [PATCH v6 16/34] gpu: nova-core: Hopper/Blackwell: add FSP falcon engine stub John Hubbard
2026-03-10 2:11 ` [PATCH v6 17/34] gpu: nova-core: Hopper/Blackwell: add FSP falcon EMEM operations John Hubbard
2026-03-10 2:11 ` [PATCH v6 18/34] gpu: nova-core: Hopper/Blackwell: add FSP message infrastructure John Hubbard
2026-03-10 10:57 ` Alexandre Courbot
2026-03-11 17:53 ` Timur Tabi
2026-03-10 2:11 ` [PATCH v6 19/34] rust: ptr: add const_align_up() John Hubbard
2026-03-10 2:11 ` [PATCH v6 20/34] gpu: nova-core: Hopper/Blackwell: calculate reserved FB heap size John Hubbard
2026-03-10 2:11 ` [PATCH v6 21/34] gpu: nova-core: add MCTP/NVDM protocol types for firmware communication John Hubbard
2026-03-10 10:53 ` Alexandre Courbot
2026-03-10 2:11 ` [PATCH v6 22/34] gpu: nova-core: Hopper/Blackwell: add FSP secure boot completion waiting John Hubbard
2026-03-10 2:11 ` [PATCH v6 23/34] gpu: nova-core: Hopper/Blackwell: add FSP message structures John Hubbard
2026-03-10 11:01 ` Alexandre Courbot
2026-03-10 2:11 ` [PATCH v6 24/34] gpu: nova-core: Hopper/Blackwell: add FMC signature extraction John Hubbard
2026-03-10 2:11 ` [PATCH v6 25/34] gpu: nova-core: Hopper/Blackwell: add FSP send/receive messaging John Hubbard
2026-03-10 2:11 ` [PATCH v6 26/34] gpu: nova-core: Hopper/Blackwell: add FspCotVersion type John Hubbard
2026-03-10 2:11 ` [PATCH v6 27/34] gpu: nova-core: Hopper/Blackwell: larger non-WPR heap John Hubbard
2026-03-10 2:11 ` [PATCH v6 28/34] gpu: nova-core: Hopper/Blackwell: add FSP Chain of Trust boot John Hubbard
2026-03-17 8:20 ` Alexandre Courbot
2026-03-10 2:11 ` [PATCH v6 29/34] gpu: nova-core: Blackwell: use correct sysmem flush registers John Hubbard
2026-03-10 2:11 ` [PATCH v6 30/34] gpu: nova-core: Hopper/Blackwell: larger WPR2 (GSP) heap John Hubbard
2026-03-17 8:25 ` Alexandre Courbot
2026-03-10 2:11 ` [PATCH v6 31/34] gpu: nova-core: refactor SEC2 booter loading into BooterFirmware::run() John Hubbard
2026-03-10 2:11 ` [PATCH v6 32/34] gpu: nova-core: Hopper/Blackwell: add GSP lockdown release polling John Hubbard
2026-03-10 2:11 ` [PATCH v6 33/34] gpu: nova-core: Hopper/Blackwell: new location for PCI config mirror John Hubbard
2026-03-17 8:27 ` Alexandre Courbot
2026-03-17 22:17 ` John Hubbard
2026-03-10 2:11 ` [PATCH v6 34/34] gpu: nova-core: Hopper/Blackwell: integrate FSP boot path into boot() John Hubbard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260310021125.117855-16-jhubbard@nvidia.com \
--to=jhubbard@nvidia.com \
--cc=a.hindborg@kernel.org \
--cc=acourbot@nvidia.com \
--cc=airlied@gmail.com \
--cc=alex.gaynor@gmail.com \
--cc=aliceryhl@google.com \
--cc=apopple@nvidia.com \
--cc=bhelgaas@google.com \
--cc=bjorn3_gh@protonmail.com \
--cc=boqun.feng@gmail.com \
--cc=dakr@kernel.org \
--cc=ecourtney@nvidia.com \
--cc=gary@garyguo.net \
--cc=joelagnelf@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lossin@kernel.org \
--cc=ojeda@kernel.org \
--cc=rust-for-linux@vger.kernel.org \
--cc=shashanks@nvidia.com \
--cc=simona@ffwll.ch \
--cc=tmgross@umich.edu \
--cc=ttabi@nvidia.com \
--cc=zhiw@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®