From: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>,
Mathieu Poirier <mathieu.poirier@linaro.org>,
Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Cc: linux-arm-msm@vger.kernel.org, linux-remoteproc@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 1/2] remoteproc: qcom: pas: Fix the dtb PAS context creation
Date: Tue, 10 Mar 2026 19:22:04 +0530 [thread overview]
Message-ID: <20260310135205.2497789-1-mukesh.ojha@oss.qualcomm.com> (raw)
DTB PAS context creation should be done only for subsystems that support
a DTB firmware binary; otherwise, memory is wasted. Move the context
creation to the appropriate location and, while at it, fix the place
where the DTB PAS context was being released unconditionally.
Fixes: b13d8baf5601 ("remoteproc: pas: Replace metadata context with PAS context structure")
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
---
drivers/remoteproc/qcom_q6v5_pas.c | 36 +++++++++++++++---------------
1 file changed, 18 insertions(+), 18 deletions(-)
diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index 46204da046fa..3bde37ac510c 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -250,7 +250,9 @@ static int qcom_pas_load(struct rproc *rproc, const struct firmware *fw)
return 0;
release_dtb_metadata:
- qcom_scm_pas_metadata_release(pas->dtb_pas_ctx);
+ if (pas->dtb_pas_id)
+ qcom_scm_pas_metadata_release(pas->dtb_pas_ctx);
+
release_firmware(pas->dtb_firmware);
return ret;
@@ -623,6 +625,7 @@ static void qcom_pas_pds_detach(struct qcom_pas *pas, struct device **pds, size_
static int qcom_pas_alloc_memory_region(struct qcom_pas *pas)
{
+ struct rproc *rproc = pas->rproc;
struct resource res;
int ret;
@@ -640,6 +643,12 @@ static int qcom_pas_alloc_memory_region(struct qcom_pas *pas)
return PTR_ERR(pas->mem_region);
}
+ pas->pas_ctx = devm_qcom_scm_pas_context_alloc(pas->dev, pas->pas_id,
+ pas->mem_phys, pas->mem_size);
+ if (IS_ERR(pas->pas_ctx))
+ return PTR_ERR(pas->pas_ctx);
+
+ pas->pas_ctx->use_tzmem = rproc->has_iommu;
if (!pas->dtb_pas_id)
return 0;
@@ -657,6 +666,14 @@ static int qcom_pas_alloc_memory_region(struct qcom_pas *pas)
return PTR_ERR(pas->dtb_mem_region);
}
+ pas->dtb_pas_ctx = devm_qcom_scm_pas_context_alloc(pas->dev, pas->dtb_pas_id,
+ pas->dtb_mem_phys,
+ pas->dtb_mem_size);
+ if (IS_ERR(pas->dtb_pas_ctx))
+ return PTR_ERR(pas->dtb_pas_ctx);
+
+ pas->dtb_pas_ctx->use_tzmem = rproc->has_iommu;
+
return 0;
}
@@ -838,23 +855,6 @@ static int qcom_pas_probe(struct platform_device *pdev)
qcom_add_ssr_subdev(rproc, &pas->ssr_subdev, desc->ssr_name);
- pas->pas_ctx = devm_qcom_scm_pas_context_alloc(pas->dev, pas->pas_id,
- pas->mem_phys, pas->mem_size);
- if (IS_ERR(pas->pas_ctx)) {
- ret = PTR_ERR(pas->pas_ctx);
- goto remove_ssr_sysmon;
- }
-
- pas->dtb_pas_ctx = devm_qcom_scm_pas_context_alloc(pas->dev, pas->dtb_pas_id,
- pas->dtb_mem_phys,
- pas->dtb_mem_size);
- if (IS_ERR(pas->dtb_pas_ctx)) {
- ret = PTR_ERR(pas->dtb_pas_ctx);
- goto remove_ssr_sysmon;
- }
-
- pas->pas_ctx->use_tzmem = rproc->has_iommu;
- pas->dtb_pas_ctx->use_tzmem = rproc->has_iommu;
ret = rproc_add(rproc);
if (ret)
goto remove_ssr_sysmon;
--
2.50.1
next reply other threads:[~2026-03-10 13:52 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-10 13:52 Mukesh Ojha [this message]
2026-03-10 13:52 ` [PATCH 2/2] remoteproc: qcom: pas: Map/unmap subsystem region before auth_and_reset Mukesh Ojha
2026-03-11 2:34 ` Dmitry Baryshkov
2026-03-11 8:49 ` Mukesh Ojha
2026-03-13 3:40 ` Dmitry Baryshkov
2026-03-13 5:57 ` Mukesh Ojha
2026-03-13 17:20 ` Dmitry Baryshkov
2026-03-18 23:20 ` kernel test robot
2026-03-24 12:55 ` Mukesh Ojha
2026-03-11 2:28 ` [PATCH 1/2] remoteproc: qcom: pas: Fix the dtb PAS context creation Dmitry Baryshkov
2026-03-11 7:01 ` Mukesh Ojha
-- strict thread matches above, loose matches on Subject: below --
2026-03-10 13:37 Mukesh Ojha
2026-03-10 13:40 ` Mukesh Ojha
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260310135205.2497789-1-mukesh.ojha@oss.qualcomm.com \
--to=mukesh.ojha@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mathieu.poirier@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®