From: "Herve Codina (Schneider Electric)" <herve.codina@bootlin.com>
To: Wim Van Sebroeck <wim@linux-watchdog.org>,
Guenter Roeck <linux@roeck-us.net>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Magnus Damm <magnus.damm@gmail.com>,
Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: linux-watchdog@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
linux-clk@vger.kernel.org,
Pascal Eberhard <pascal.eberhard@se.com>,
Miquel Raynal <miquel.raynal@bootlin.com>,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
"Herve Codina (Schneider Electric)" <herve.codina@bootlin.com>
Subject: [PATCH 0/5] watchdog: rzn1: Add support for direct hardware reset
Date: Tue, 10 Mar 2026 18:32:41 +0100 [thread overview]
Message-ID: <20260310173249.161354-1-herve.codina@bootlin.com> (raw)
Hi,
The current watchdog driver handling wachdogs of the RZ/N1 SoCs is based
on interrupt only to perform the reset. On the watchdog timeout, an
interrupt is triggered and the software initiates the reset.
The watchdogs available in the RZ/N1 SoCs can directly perform an
hardware reset using their dedicated reset line.
On timeout, the watchdog also asserts its dedicated reset line. This
reset line is connected to the reset controller (part of sysctrl) and,
if this line is enabled as a possible reset source at the reset
controller level, it initiates a system reset.
This series adds support for this feature allowing watchdogs to directly
reset the system with any software needs when a watchdog timeout occurs.
The first two patches are minor fixes and improvements without changing
the current functional behavior.
Patches 3 to 5 add support for the feature adding:
- The reset line description in the RZ/N1 watchdog binding,
- A new helper at sysctrl level (sysctrl is handled by the clock
driver in RZ/N1) to enable watchdog reset sources,
- The support itself in the watchdog driver putting everything together.
Best regards,
Hervé
Herve Codina (Schneider Electric) (5):
watchdog: rzn1: Fix reverse xmas tree declaration
watchdog: rzn1: Use dev_err_probe()
dt-bindings: watchdog: renesas,rzn1-wdt: Document the reset line
clk: renesas: r9a06g032: Introduce a helper to set rsten register
watchdog: rzn1: Add support for direct hardware reset
.../bindings/watchdog/renesas,rzn1-wdt.yaml | 22 +++++++
drivers/clk/renesas/r9a06g032-clocks.c | 32 ++++++++++
drivers/watchdog/rzn1_wdt.c | 63 ++++++++++++++-----
.../dt-bindings/watchdog/renesas,rzn1-wdt.h | 16 +++++
include/linux/soc/renesas/r9a06g032-sysctrl.h | 12 ++++
5 files changed, 131 insertions(+), 14 deletions(-)
create mode 100644 include/dt-bindings/watchdog/renesas,rzn1-wdt.h
--
2.53.0
next reply other threads:[~2026-03-10 17:33 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-10 17:32 Herve Codina (Schneider Electric) [this message]
2026-03-10 17:32 ` [PATCH 1/5] watchdog: rzn1: Fix reverse xmas tree declaration Herve Codina (Schneider Electric)
2026-03-10 17:32 ` [PATCH 2/5] watchdog: rzn1: Use dev_err_probe() Herve Codina (Schneider Electric)
2026-03-10 17:32 ` [PATCH 3/5] dt-bindings: watchdog: renesas,rzn1-wdt: Document the reset line Herve Codina (Schneider Electric)
2026-03-10 17:38 ` Krzysztof Kozlowski
2026-03-10 18:12 ` Herve Codina
2026-03-10 20:14 ` Krzysztof Kozlowski
2026-03-10 17:32 ` [PATCH 4/5] clk: renesas: r9a06g032: Introduce a helper to set rsten register Herve Codina (Schneider Electric)
2026-03-10 17:32 ` [PATCH 5/5] watchdog: rzn1: Add support for direct hardware reset Herve Codina (Schneider Electric)
2026-03-11 2:12 ` kernel test robot
2026-03-11 6:07 ` kernel test robot
2026-03-10 21:53 ` [PATCH 0/5] " Wolfram Sang
2026-03-11 15:09 ` Herve Codina
2026-03-11 15:27 ` Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260310173249.161354-1-herve.codina@bootlin.com \
--to=herve.codina@bootlin.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=krzk+dt@kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=magnus.damm@gmail.com \
--cc=miquel.raynal@bootlin.com \
--cc=mturquette@baylibre.com \
--cc=pascal.eberhard@se.com \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=thomas.petazzoni@bootlin.com \
--cc=wim@linux-watchdog.org \
--cc=wsa+renesas@sang-engineering.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®