[PATCH v3 2/5] PCI: dwc: Use common D3cold eligibility helper in suspend path

[Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>]

Previously, the driver skipped putting the link into L2/device state in
D3cold whenever L1 ASPM was enabled, since some devices (e.g. NVMe) expect
low resume latency and may not tolerate deeper power states. However, such
devices typically remain in D0 and are already covered by the new helper's
requirement that all endpoints be in D3hot before the host bridge may
enter D3cold.

So, replace the local L1/L1SS-based check in dw_pcie_suspend_noirq() with
the shared pci_host_common_d3cold_possible() helper to decide whether the
DesignWare host bridge can safely transition to D3cold.

Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
---
 drivers/pci/controller/dwc/pcie-designware-host.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index 6ae6189e9b8a9021c99ece17504834650debd86b..8e81f0208c76fb22aa908de4e1ff379ec0cae2ff 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -16,9 +16,11 @@
 #include <linux/msi.h>
 #include <linux/of_address.h>
 #include <linux/of_pci.h>
+#include <linux/pci.h>
 #include <linux/pci_regs.h>
 #include <linux/platform_device.h>
 
+#include "../pci-host-common.h"
 #include "../../pci.h"
 #include "pcie-designware.h"
 
@@ -1218,18 +1220,13 @@ static int dw_pcie_pme_turn_off(struct dw_pcie *pci)
 
 int dw_pcie_suspend_noirq(struct dw_pcie *pci)
 {
-	u8 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
 	int ret = 0;
 	u32 val;
 
 	if (!dw_pcie_link_up(pci))
 		goto stop_link;
 
-	/*
-	 * If L1SS is supported, then do not put the link into L2 as some
-	 * devices such as NVMe expect low resume latency.
-	 */
-	if (dw_pcie_readw_dbi(pci, offset + PCI_EXP_LNKCTL) & PCI_EXP_LNKCTL_ASPM_L1)
+	if (!pci_host_common_d3cold_possible(pci->pp.bridge))
 		return 0;
 
 	if (pci->pp.ops->pme_turn_off) {

-- 
2.34.1