[PATCH] platform/x86: hp-wmi: Add Omen 16-xf0xxx (8BCA) support

[Raed <youaretalkingtoraed@gmail.com>]

From: Raed <thisisraed@outlook.com>

The HP Omen 16-xf0xxx board 8BCA uses the same Victus-S fan and
thermal WMI path as other recently supported Omen/Victus boards,
but it requires Omen v1 thermal profile parameters for correct
platform profile behavior.

Add board 8BCA to victus_s_thermal_profile_boards[] and map it
to omen_v1_thermal_params.

Validated on HP Omen 16-xf0xxx (board 8BCA):
- /sys/firmware/acpi/platform_profile exposes
	low-power/balanced/performance
- fan RPM reporting works (fan1_input/fan2_input)
- manual fan control works through hp-wmi hwmon (pwm1/pwm1_enable)

Signed-off-by: Raed <thisisraed@outlook.com>
---
 drivers/platform/x86/hp/hp-wmi.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/platform/x86/hp/hp-wmi.c b/drivers/platform/x86/hp/hp-wmi.c
index 68ede7e57..6de701762 100644
--- a/drivers/platform/x86/hp/hp-wmi.c
+++ b/drivers/platform/x86/hp/hp-wmi.c
@@ -187,6 +187,10 @@ static const struct dmi_system_id victus_s_thermal_profile_boards[] __initconst
 		.matches = { DMI_MATCH(DMI_BOARD_NAME, "8BCD") },
 		.driver_data = (void *)&omen_v1_thermal_params,
 	},
+	{
+		.matches = { DMI_MATCH(DMI_BOARD_NAME, "8BCA") },
+		.driver_data = (void *)&omen_v1_thermal_params,
+	},
 	{
 		.matches = { DMI_MATCH(DMI_BOARD_NAME, "8BD4") },
 		.driver_data = (void *)&victus_s_thermal_params,

base-commit: b29fb8829bff243512bb8c8908fd39406f9fd4c3
-- 
2.52.0