[PATCH v2 1/2] dt-bindings: usb: nxp,ptn5110: add optional orientation-gpios property

[Xu Yang <xu.yang_2@nxp.com>]

The Type-C chip know the cable orientation and then normally will set the
switch channel to correctly configure the data path. Some chips itself
support to output the control signal by indicating the capability in
bit[0] of STANDARD_OUTPUT_CAPABILITIES register and do it in
CONFIG_STANDARD_OUTPUT register. For PTN5110 which doesn't present this
capability currently there is no way to achieve the orientation setting.
Add an optional "orientation-gpios" property to achieve the same purpose.

Signed-off-by: Xu Yang <xu.yang_2@nxp.com>

---
Changes in v2:
 - use property name "orientation-gpios"
 - remove the "if" condition and modify commit message
---
 Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml b/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml
index 65a8632b4d9e..581e5916eadd 100644
--- a/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml
+++ b/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml
@@ -26,6 +26,10 @@ properties:
     $ref: /schemas/connector/usb-connector.yaml#
     unevaluatedProperties: false
 
+  orientation-gpios:
+    maxItems: 1
+    description: Optional orientation select control
+
 required:
   - compatible
   - reg

-- 
2.34.1