From: Sean Rhodes <sean@starlabs.systems>
To: linux-kernel@vger.kernel.org
Cc: Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
Chris Chiu <chris.chiu@canonical.com>,
Kailang Yang <kailang@realtek.com>,
Stefan Binding <sbinding@opensource.cirrus.com>,
Edip Hazuri <edip@medip.dev>, Zhang Heng <zhangheng@kylinos.cn>,
linux-sound@vger.kernel.org
Subject: [PATCH v3] ALSA: hda/realtek: Sequence GPIO2 on Star Labs StarFighter
Date: Sat, 14 Mar 2026 19:34:34 +0000 [thread overview]
Message-ID: <20260314193434.8237-1-sean@starlabs.systems> (raw)
In-Reply-To: <4d5fb71b132bb283fd41c622b8413770b2065242.1771532060.git.sean@starlabs.systems>
The initial StarFighter quirk fixed the runtime suspend pop by muting
speakers in the shutup callback before power-down. Further hardware
validation showed that the speaker path is controlled directly by LINE2
EAPD on NID 0x1b together with GPIO2 for the external amplifier.
Replace the shutup-delay workaround with explicit sequencing of those
controls at playback start and stop:
- assert LINE2 EAPD and drive GPIO2 high on PREPARE
- deassert LINE2 EAPD and drive GPIO2 low on CLEANUP
This avoids the runtime suspend pop without a sleep, and also fixes pops
around G3 entry and display-manager start that the original workaround
did not cover.
Fixes: 1cb3c20688fc ("ALSA: hda/realtek: Fix speaker pop on Star Labs StarFighter")
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Stefan Binding <sbinding@opensource.cirrus.com>
Cc: Kailang Yang <kailang@realtek.com>
Cc: Chris Chiu <chris.chiu@canonical.com>
Cc: Edip Hazuri <edip@medip.dev>
Cc: linux-sound@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Tested-by: Sean Rhodes <sean@starlabs.systems>
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
---
sound/hda/codecs/realtek/alc269.c | 64 ++++++++++++++++++++++---------
1 file changed, 45 insertions(+), 19 deletions(-)
diff --git a/sound/hda/codecs/realtek/alc269.c b/sound/hda/codecs/realtek/alc269.c
index 4c49f1195e1b..901314a7af51 100644
--- a/sound/hda/codecs/realtek/alc269.c
+++ b/sound/hda/codecs/realtek/alc269.c
@@ -1017,24 +1017,6 @@ static int alc269_resume(struct hda_codec *codec)
return 0;
}
-#define STARLABS_STARFIGHTER_SHUTUP_DELAY_MS 30
-
-static void starlabs_starfighter_shutup(struct hda_codec *codec)
-{
- if (snd_hda_gen_shutup_speakers(codec))
- msleep(STARLABS_STARFIGHTER_SHUTUP_DELAY_MS);
-}
-
-static void alc233_fixup_starlabs_starfighter(struct hda_codec *codec,
- const struct hda_fixup *fix,
- int action)
-{
- struct alc_spec *spec = codec->spec;
-
- if (action == HDA_FIXUP_ACT_PRE_PROBE)
- spec->shutup = starlabs_starfighter_shutup;
-}
-
static void alc269_fixup_pincfg_no_hp_to_lineout(struct hda_codec *codec,
const struct hda_fixup *fix, int action)
{
@@ -1454,6 +1436,32 @@ static void alc274_hp_envy_pcm_hook(struct hda_pcm_stream *hinfo,
}
}
+#define ALC233_STARFIGHTER_SPK_PIN 0x1b
+#define ALC233_STARFIGHTER_GPIO2 0x04
+
+static void alc233_starfighter_update_amp(struct hda_codec *codec, bool on)
+{
+ snd_hda_codec_write(codec, ALC233_STARFIGHTER_SPK_PIN, 0,
+ AC_VERB_SET_EAPD_BTLENABLE,
+ on ? AC_EAPDBTL_EAPD : 0);
+ alc_update_gpio_data(codec, ALC233_STARFIGHTER_GPIO2, on);
+}
+
+static void alc233_starfighter_pcm_hook(struct hda_pcm_stream *hinfo,
+ struct hda_codec *codec,
+ struct snd_pcm_substream *substream,
+ int action)
+{
+ switch (action) {
+ case HDA_GEN_PCM_ACT_PREPARE:
+ alc233_starfighter_update_amp(codec, true);
+ break;
+ case HDA_GEN_PCM_ACT_CLEANUP:
+ alc233_starfighter_update_amp(codec, false);
+ break;
+ }
+}
+
static void alc274_fixup_hp_envy_gpio(struct hda_codec *codec,
const struct hda_fixup *fix,
int action)
@@ -1467,6 +1475,24 @@ static void alc274_fixup_hp_envy_gpio(struct hda_codec *codec,
}
}
+static void alc233_fixup_starlabs_starfighter(struct hda_codec *codec,
+ const struct hda_fixup *fix,
+ int action)
+{
+ struct alc_spec *spec = codec->spec;
+
+ switch (action) {
+ case HDA_FIXUP_ACT_PRE_PROBE:
+ spec->gpio_mask |= ALC233_STARFIGHTER_GPIO2;
+ spec->gpio_dir |= ALC233_STARFIGHTER_GPIO2;
+ spec->gpio_data &= ~ALC233_STARFIGHTER_GPIO2;
+ break;
+ case HDA_FIXUP_ACT_PROBE:
+ spec->gen.pcm_playback_hook = alc233_starfighter_pcm_hook;
+ break;
+ }
+}
+
static void alc_update_coef_led(struct hda_codec *codec,
struct alc_coef_led *led,
bool polarity, bool on)
@@ -4058,7 +4084,6 @@ enum {
ALC245_FIXUP_CLEVO_NOISY_MIC,
ALC269_FIXUP_VAIO_VJFH52_MIC_NO_PRESENCE,
ALC233_FIXUP_MEDION_MTL_SPK,
- ALC233_FIXUP_STARLABS_STARFIGHTER,
ALC294_FIXUP_BASS_SPEAKER_15,
ALC283_FIXUP_DELL_HP_RESUME,
ALC294_FIXUP_ASUS_CS35L41_SPI_2,
@@ -4074,6 +4099,7 @@ enum {
ALC288_FIXUP_SURFACE_SWAP_DACS,
ALC236_FIXUP_HP_MUTE_LED_MICMUTE_GPIO,
ALC233_FIXUP_LENOVO_GPIO2_MIC_HOTKEY,
+ ALC233_FIXUP_STARLABS_STARFIGHTER,
ALC245_FIXUP_BASS_HP_DAC,
ALC245_FIXUP_ACER_MICMUTE_LED,
};
--
2.51.0
next prev parent reply other threads:[~2026-03-14 19:34 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-19 20:14 [PATCH v6] ALSA: hda/realtek: Fix speaker pop " Sean Rhodes
2026-02-23 8:51 ` Takashi Iwai
2026-03-14 19:34 ` Sean Rhodes [this message]
2026-03-15 9:27 ` [PATCH v3] ALSA: hda/realtek: Sequence GPIO2 " Takashi Iwai
2026-03-15 20:11 ` [PATCH v4] " Sean Rhodes
2026-03-16 17:05 ` Takashi Iwai
2026-03-16 18:36 ` Sean Rhodes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260314193434.8237-1-sean@starlabs.systems \
--to=sean@starlabs.systems \
--cc=chris.chiu@canonical.com \
--cc=edip@medip.dev \
--cc=kailang@realtek.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=perex@perex.cz \
--cc=sbinding@opensource.cirrus.com \
--cc=tiwai@suse.com \
--cc=zhangheng@kylinos.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®