[PATCH 4/5] PCI: intel-gw: Remove atu base assignment

[Florian Eckert <fe@dev.tdt.de>]

In the current implementation, only one PCIe bridge is recognised. This
change removes the assignment of the ATU base address during host setup.
Instead, the ATU base address is read from the device tree. To do this,
the 'atu' range of the DTS entry must be changed for PCIe.

Old DTS entry for PCIe:
reg = <0xd1000000 0x1000>,
	<0xd3000000 0x20000>,
	<0xd0c41000.0x1000>;
reg-names = "dbi", "config", "app";

New DTS entry for PCIe
reg = <0xd1000000 0x1000>,
	<0xd10c0000 0x1000>,
	<0xd3000000 0x20000>,
	<0xd0c41000.0x1000>;
reg-names = "dbi", "atu", "config", "app";

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
---
 drivers/pci/controller/dwc/pcie-intel-gw.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-intel-gw.c b/drivers/pci/controller/dwc/pcie-intel-gw.c
index 6bd25f8da605032bfdb97596fb3a1f6a03e88bfc..cec972d5aa9107d4708338bd7349415a31f0e688 100644
--- a/drivers/pci/controller/dwc/pcie-intel-gw.c
+++ b/drivers/pci/controller/dwc/pcie-intel-gw.c
@@ -311,8 +311,6 @@ static int intel_pcie_host_setup(struct intel_pcie *pcie)
 		goto clk_err;
 	}
 
-	pci->atu_base = pci->dbi_base + 0xC0000;
-
 	ret = phy_init(pcie->phy);
 	if (ret)
 		goto phy_err;

-- 
2.47.3